Search:

Type: Posts; User: yormets

Page 1 of 13 1 2 3 4

Search: Search took 0.12 seconds.

  1. Replies
    3
    Views
    470

    Re: M477 mfp RADF Mylar

    Thats what I thought too.
  2. Replies
    3
    Views
    470

    M477 mfp RADF Mylar

    Customer has a machine that puts lines on the copies when using the RADF. I tried cleaning the mylar but it is scratched and I can't get rid of it. HP sells no mylar for the machine. Not available....
  3. Replies
    29
    Views
    3,633

    Re: MFC8900 Constant paper Jam

    Thanks for all your help. I got used to the service manual and tried everything. Reset 01, paper sensor check, removed the fuser and checked that nothing was broken or jammed. tHE GEARS TURN FINE BY...
  4. Replies
    29
    Views
    3,633

    Re: MFC8900 Constant paper Jam

    Still in constant paper jam error 7000. Checked all the sensors with sensor check code. All are working correctly. Checked the drum count was at 30133, Ordered new drum unit. Cannot reset drum...
  5. Replies
    29
    Views
    3,633

    Re: MFC8900 Constant paper Jam

    Tried that too. I ordered a new drum unit. It is past 30,000
  6. Replies
    29
    Views
    3,633

    Re: MFC8900 Constant paper Jam

    Drum rotations 30130. Perhaps that is it.
  7. Replies
    29
    Views
    3,633

    Re: MFC8900 Constant paper Jam

    Can't get to the settings screen. Constant paper jam display
  8. Replies
    29
    Views
    3,633

    Re: MFC8900 Constant paper Jam

    I cannot print out consumable counts. When I get the latest error code (80) the code is 4000
  9. Replies
    29
    Views
    3,633

    Re: MFC8900 Constant paper Jam

    Enter maimt mode *,8,6,2,4 Function 03 (1) Be sure to enter the maintenance mode. (Refer to “1.1 How to Enter Maintenance Mode”in Chapter 5.)(2) Press the [0], and then the [3] key in the initial...
  10. Replies
    29
    Views
    3,633

    Re: MFC8900 Constant paper Jam

    I checked all the pAPER SENSORS IN TEST MODE AND THEY ARE ALL WORING. tHE LAST ERROR CODE IS 4200.
  11. Replies
    29
    Views
    3,633

    Re: MFC8900 Constant paper Jam

    Got the service manual. All the paper sensors are turning on and off within the test mode. I looked up the last errpr code and it is 4200. Drum exceeded rotations. If that is the error why does it...
  12. Replies
    29
    Views
    3,633

    Re: MFC8900 Constant paper Jam

    It is in a constant jam state. Someone pulled out some paper from the machine. More than likely there is a broken or jammed paper sensor. Any way to check that. Physically it shows nothing.
  13. Replies
    29
    Views
    3,633

    MFC8900 Constant paper Jam

    Anyone know how to check the paper sensors in service mode on this machine. I can't seem to find a service manual online anywhere. It saya paper jam under the drum, however there is no paper...
  14. Replies
    2
    Views
    1,007

    E Studio 3540C Printing in color

    My EStudio 3540C only prints in black and white from a color PDF file on a USB drive. What gives? Why is this happening?
  15. Replies
    2
    Views
    222

    Re: Canon IR C1031 IF Hard Drive

    Thank you. No wonder I couln't find it.
  16. Replies
    2
    Views
    222

    Canon IR C1031 IF Hard Drive

    Can anyone tell me where the hard drive is hiding on this model?
    Thanks
  17. Thread: MFP M477 Fuser

    by yormets
    Replies
    2
    Views
    366

    Re: MFP M477 Fuser

    Exactly what I wanted to know. Thank you very much.
  18. Thread: MFP M477 Fuser

    by yormets
    Replies
    2
    Views
    366

    MFP M477 Fuser

    Is it more difficult to change the fuser on the MFP M477 than just the printer M477?
  19. Replies
    4
    Views
    375

    Re: E Studio 3040C NIC Initialization

    Thank you.
  20. Replies
    4
    Views
    375

    Re: E Studio 3040C NIC Initialization

    My mistake. It is a 3540C
  21. Replies
    4
    Views
    375

    E Studio 3040C NIC Initialization

    Having trouble getting the network working. Is the NIC reset code still 08-693 on this model?
  22. Replies
    2
    Views
    372

    Re: E Studio 200L CF60 error code

    Thank you for pointing out where to test the switch. I overlooked it. I will know soon what it is.
  23. Replies
    2
    Views
    372

    E Studio 200L CF60 error code

    Machine was working. I pulled the PCU/Dev unit and cleaned up the drum blade area. Reinstalled and now I get a CF60 error as soon as the paper hits the registration roller. There is no bind in the...
  24. Replies
    7
    Views
    661

    Re: E Studio 355 Toner fusing

    Thank you very much.
  25. Replies
    7
    Views
    661

    Re: E Studio 355 Toner fusing

    OEM Toner. It is thick paper being run through the bypass properly set up as to what media is on the bypass tray. The media is acceptable according to specs. The machine has 270K and I have no idea...
Results 1 to 25 of 309
Page 1 of 13 1 2 3 4