Search:

Type: Posts; User: copier tech

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds; generated 5 minute(s) ago.

  1. Replies
    10
    Views
    349

    Re: DF scanning failed - MP 301

    Do you can the line if you copy from the main glass duplex or is it only when using the DF.

    I see you have stated you carefully cleaned all optics etc so I would suggest that.
  2. Replies
    6
    Views
    210

    Re: going back to basics

    Good luck, sounds like you know Ricoh. It could be worse starting back with an unfamiliar manufacturer.
  3. Replies
    5
    Views
    238

    [CQ] Re: IRA C3525i magenta band/background

    Yes this the issue but I couldn't see anything wrong with it, a good even coating of toner but fitting a new one resolved the issue.
  4. Replies
    5
    Views
    238

    [CQ] Re: IRA C3525i magenta band/background

    As I said in the original post I replaced ALL the drum units with new.
  5. Replies
    5
    Views
    246

    [Dead] Re: I broke a Bizhub 458e

    We can supply you with the firmware & animation data. This is very easy to load onto the machine.

    Drop us an email form either site below.
  6. Replies
    1
    Views
    137

    Re: Kyocera 3501i

    We're happy to help. Please contact us at either site below.
  7. Re: IM550 while accessing address book "PROCESSING HAS FAILED"

    You could try replacing the HDD.
  8. Replies
    2
    Views
    155

    Re: NEED C754 firmware please help guys

    Happy to help. Please contact us from either web site below.
  9. Replies
    20
    Views
    1,910

    Re: Automatic firmware update

    Yes we do, please contact us via our website.
  10. Re: Ricoh Pro C5310 Faded/light prints or copies

    After you replaced ALL the drums, developer, ITB ass'y, & transfer unit what was the 'easy fix?'
  11. Replies
    58
    Views
    23,103

    Re: Konica Software Switch settings (complete)

    Good point, may this is an engine switch not software SW.
  12. Replies
    58
    Views
    23,103

    Re: Konica Software Switch settings (complete)

    Thank you for this info I will check this setting next time i'm on site.

    I also found out SW83 disables the media sensor but the service manual doesn't state what the HEX setting should be.
    ...
  13. Replies
    58
    Views
    23,103

    Re: Konica Software Switch settings (complete)

    Is there a SW to disable the media detect sensor on the C650i ?

    I have a device with 80gsm loaded but it keeps switching the trays to 120gsm.
  14. Replies
    2
    Views
    214

    Re: Ricoh MP C2503

    Sounds like the toner hoper has failed it is very common on this model. Take the hopper out & check the feed screw they usually snap.
  15. Replies
    11
    Views
    536

    Re: Scanning issues with windows 11

    The MP C4501 doesn't support SMB v2/3 this is most likely your issue as Win 11 blocks SMB v1.0.
  16. Replies
    179
    Views
    49,521

    Re: i have all of canon service+SST

    Hi, yes we can supply this for you. Contact us from either weblink below.
  17. Replies
    1
    Views
    78

    Re: Canon ir2520 scanner

    Clean the scanner optics & stream reading glass.
  18. Replies
    6
    Views
    1,028

    Re: iR Adv C3325i firmware needed

    We are happy to supply the SST & firmware. Drop us an email.

    We can supply most major manufacturers printer & photocopier firmware. Click Here To Download - Ricoh, Konica Minolta, Kyocera, Lexmark...
  19. Replies
    5
    Views
    238

    [CQ] IRA C3525i magenta band/background

    Hi all,

    Iím a bit stumped with a minor print quality issue in a church, a faint magenta band down the center of prints running paper feed direction A4 LEF. (see picture attached not great example...
  20. Re: Ricoh Aficio MP C3002 Solid Areas Mottled

    From your test print sample the quality doesn't look too made for a machine of this age.

    Were the PCU drums you replaced genuine Ricoh ? as genuine from Ricoh come with the primary charge roller...
  21. Re: MP C3502 - Brand New Black Toner Not Recognized Twice

    If when you take the toner out & refit it can you hear the machine whirring etc trying to add toner ? if yes then most likely you have a failed toner pump or a blocked pipe.
  22. Replies
    9
    Views
    358

    Re: No web interface

    Don't worry you can take all the glory! :cool:
  23. Re: BH-C-280, my own old beast for testing purposes, stuck on logo

    Was the device working OK before you replaced the HDD ?

    Have you tried updating the firmware?

    Can you enter 'trouble reset' mode ? (Hold down counter/utility button & power on)
  24. Replies
    2
    Views
    239

    Re: Canon ir adv c5235i

    No Canon don't have the option to send counter via email.

    What you need is this:

    Canon imageWARE Remote | Device Management Software
  25. Thread: Firmware

    by copier tech
    Replies
    1
    Views
    113

    [Dead] Re: Firmware

    Hi Magesh,

    We can supply this for you drop us an email.

    Printer Firmware
Results 1 to 25 of 499
Page 1 of 20 1 2 3 4