Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 0.11 seconds.

  1. Re: HP solenoid sticking; what material do you use to replace

    With a little practice, MacGuyvers like this are as good or better than ordering parts. On a first trip, if the MacGuyver does not cost too much time ... yes I'll try it. If it holds until the parts...
  2. Re: no more "heavy duty" km office engines

    This is bad news! We've got 6 of these in a legal firm that were placed 8 months ago, with 900K prints and 2M scans. No, not total. 900K prints/2M scans on each device! I had some reservations about...
  3. Re: HP solenoid sticking; what material do you use to replace

    In this situation I usually cut down those extra foreign language control panel stickers. They are self-adhesive, easy to cut, ~0.75mm thick, and come in whatever language you'd like. They never get...
  4. Re: Fuzzy Prints / White Spots on Black only

    +1. Maybe developer drive clutch? =^..^=
  5. Re: Fuzzy Prints / White Spots on Black only

    Did you say what sort of machine this is? =^..^=
  6. Replies
    9
    Views
    339

    Re: Door won't close (Ka Bizhub C220)

    47418
    =^..^=
  7. Replies
    2
    Views
    102

    [Jamming] Re: Paper Jam Code No. 25 Wont Clear

    You might try cleaning the paper sensors with a toothbrush or air. Yelling at it hasn't helped so far.
    =^..^=
  8. [Misc] Re: Can I fill a toner cartrige c308 with the old one c284e ?

    Let me be the first to say that this is a really really bad idea. If yo decide to do this, remember that I advised against it.
    =^..^=
  9. Replies
    13
    Views
    379

    Re: Happy Thanksgiving!

    47412

    =^..^=
  10. Replies
    6
    Views
    191

    Re: SU KYOCERA ECOSYS M2735dw

    Like Santander says: The teflon sheet on the fuser heater dries out, slowing the rotation of the fuser. There have been multiple updates to theis fuser unit, including firmware. Replace the fuser...
  11. Replies
    21
    Views
    1,935

    Re: C451 Printing issue, Black Imaging Unit?

    Thanks for following up. =^..^=
  12. Re: 2 Copiers needing firmware to possibly help fax over ATA adapter.

    I don't know if the firmware will help the Canon (I suspect not), but I can tell you for certain that firmware will not help the Kyocera. What you need (if this machine has it) is simulation U660 Set...
  13. Re: Bizhub c284 double sided printing question

    On the C284E, C554e, & C754e the machine specs say that you can duplex up to Thick3 <256gsm, but I don't think I'd count on that for the C284e or the C554e. I should think that your 215gsm media...
  14. Re: Bizhub c284 double sided printing question

    You'll have to be more specific. There is no such media description as "Cardstock". Choose from Index, Points, Millimeter, Book, Bond, Bristol, Cover, Tag, or preferably: gsm (grams per square...
  15. Re: Lexmark check printer machine type 4062-01A with a code 931.01

    Sorry, I haven't had that pleasure yet.
    =^..^=
  16. Re: Lexmark check printer machine type 4062-01A with a code 931.01

    Yes, printhead = laser unit.
  17. Re: [Need Help] empty lines on printed document

    I guess that I have to point out here that the laser slit glass and the scanner slit glass, though performing a similar function, are two entirely different items. I really hope that this is result...
  18. Replies
    10
    Views
    274

    [Misc] Re: Samsung SCX-4100

    Yeah, I need to work on political correctness. In the end it spares me a lot of BS. =^..^=
  19. Replies
    10
    Views
    274

    [Misc] Re: Samsung SCX-4100

    Not sure about this model, but most do not support scanning via USB. I doubt that your firmware was "hacked". If you have an RJ45 connection, use TCP/IP. =^..^=

    EDIT: OMG, what a POS! 16 years...
  20. Replies
    5
    Views
    149

    Re: Colortrac SmartLF Ci 40

    Usually it's just dirt on the CIS(s) or the white reference roller, probably both (voids=dirty white reference, lines=dirty CIS). The one that I saw that was wrinkled had almost no usage:
    Colortrac...
  21. Replies
    5
    Views
    149

    Re: Colortrac SmartLF Ci 40

    If I were to do some guessing, I'd say it's possible that the CIS(s) & the white reference roller are dirty or the roller wrinkled. If the roller is wrinkled or will not clean, it will need to be...
  22. Replies
    4
    Views
    304

    Re: c3350i series fun

    Thanks for sharing. =^..^=
  23. Re: TASKalfa 2552ciG(KYOCERA) Utax 3206 intermittent slow printing

    If you can view the log in the Command Center, from your browser select Print > CutePDF > save as PDF. =^..^=
  24. Re: Restoration of developer unit in taskalfa 3501i

    I've successful disassembled two or three of these developing units, but have never reassembled one. It's glued shut, not made to refurbish. =^..^=
  25. Re: [Need Help] empty lines on printed document

    If that page was SEF (short edge feed), I'm going to guess that you've got an obstruction under the doctor blade, leaving a blank band on the developing roller. =^..^=
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4