Search:

Type: Posts; User: D Colour

Page 1 of 7 1 2 3 4

Search: Search took 0.33 seconds.

  1. [CQ] Re: BH C284e Counter list/ list output shrunk, squashed, condensed

    Thanks for all the input. Hopefully we will get to try some of the suggestions out in the not too distant future.

    Stay safe and indoors!
  2. [CQ] Re: BH C284e Counter list/ list output shrunk, squashed, condensed

    Just tried that, all exactly the same as feeding from the paper trays.
  3. [CQ] Re: BH C284e Counter list/ list output shrunk, squashed, condensed

    We are an Olivetti dealer, have access to Olivetti's side of things. Plenty of bulletins, but nothing relevant to this!

    If you could have a look, that would be great, thanks!
  4. [CQ] Re: BH C284e Counter list/ list output shrunk, squashed, condensed

    Its G20-M1. Was always warned off using the "Special" firmwares! Consumable page prints out the same (squashed), as does the maintenance, parameters etc.

    In Service>Test mode, they all print out...
  5. [CQ] BH C284e Counter list/ list output shrunk, squashed, condensed

    Hi
    Have a strange issue on a C284e.

    When we print a counter out or anything from list output we get the below. It has squashed or shrunk the image down.

    Long edge Feed
    45291

    Short Edge Feed
  6. Replies
    2
    Views
    659

    Re: Pm on a 6002i now code 7301

    I realise this thread is old, but this may help someone in the future. We have just had this code on a 5002i. After fitting a new dev unit. There is a packing piece on the opening to allow toner into...
  7. Replies
    7
    Views
    996

    Re: Taskalfa 5002i Jam 4211

    Just closing this off.

    The fault (bizarrely) looks very much like being the developer unit. I guess it has a problem of some sort and isn't turning as freely as it should have been. You can hear a...
  8. Replies
    7
    Views
    996

    Re: Taskalfa 5002i Jam 4211

    Thanks mtcchuck. Have already cleaned out the entire silver reg roller assembly, the roller assy on the door is very clean and both rotate ok, but would be worth having a closer look at.

    Changing...
  9. Replies
    7
    Views
    996

    Re: Taskalfa 5002i Jam 4211

    Thanks for the info!

    Because there was no issue with the print quality (like stretching), didn't think the drum/dev could be the culprit. There was another post about 4211, where they changed...
  10. Replies
    7
    Views
    996

    Taskalfa 5002i Jam 4211

    Hi all.

    We have an Olivetti 5000MF (Taskalfa 5002i) giving a constant Jam 4211 (Fuser Sensor Stay Jam). The paper jams about 1 to 2 inches out of the Fuser unit.

    Initially thought it to be...
  11. Replies
    3
    Views
    276

    [Misc] Re: C3100p image unit low

    So....

    Service mode

    System 2

    Paper Empty Alert (I dont know why it is in here!)

    Near Empty
  12. Replies
    3
    Views
    276

    [Misc] Re: C3100p image unit low

    It states in the service manual that "near life" is 17,000, life is 20k and life stop is 21k. You would assume there is a near life warning in this case.

    There was a "Near Empty/Near Full" setting...
  13. Replies
    2
    Views
    3,640

    Re: 6002i J4111 & J4211

    Hi JR2ALTA

    Can you tell me what was your fix for this please? Or what unit/s you replaced. I know you ordered the PM kit. We have a problematic machine giving lots of J4211 (just a couple of...
  14. Replies
    26
    Views
    1,315

    Re: C364e - MFP firmware update N.G

    Also SSD replacement..43867
  15. Replies
    26
    Views
    1,315

    Re: C364e - MFP firmware update N.G

    I saved this from another post on here - have you tried this?

    43866
  16. Replies
    26
    Views
    1,315

    Re: C364e - MFP firmware update N.G

    Hi

    I was having a similar problem and found this post very helpful.

    Konica BH C654e reset HDD lock password issue

    You may not have the HDD Lock error, but our main issue was MFP NG. Which...
  17. Replies
    3
    Views
    312

    Re: Job log on bizhub copier

    You can view the last 100 jobs (Print/Send/Save) via the machines webpage, then job and job history.
  18. Re: Konica BH C654e reset HDD lock password issue

    Many thanks for this. Was getting pretty much this exact problem on an ex lease C284e. Disconnecting the hard disk allowed us to completely install the latest FW. Just going through the physical...
  19. Replies
    21
    Views
    4,022

    Re: M2035 Blank Copies through DP and on Glass

    Sent.

    Yes BC I did wonder was the scan actually working. I guess by the lack of posts afterwards, it maybe does! Surprising!
  20. Replies
    6
    Views
    2,078

    [CQ] MFC-L8690CDW Fuser Issue (Common Problem?)

    Hi all

    We don't normally deal with Brother machines, but an existing customer has a few of these and asked us to investigate...

    Customer has 3 x Brother MFC-L8690CDW on site. Every machine has...
  21. Replies
    21
    Views
    4,022

    Re: M2035 Blank Copies through DP and on Glass

    Just sent you an email. Yes I still have the originals.
  22. Replies
    21
    Views
    4,022

    Re: M2035 Blank Copies through DP and on Glass

    Hi, still won't upload. Its only 6.5mb. Can you send me your email?
  23. Replies
    1
    Views
    229

    Re: c3351 irregular black line

    Black image unit drum cleaning blade bouncing?

    Or maybe the transfer belt cleaning section? Though this is unlikely on a new machine.
  24. Replies
    3
    Views
    423

    Re: C3350 vs c3351 fuser?

    Hi

    Did you end up fitting a C3351 fuser to C3350 and did it work?

    Thanks

    J
  25. [Misc] Re: Taskalfa 3050Ci Laser Unit LK8305 - LK8705 interchangeable?

    Thanks for that, but the LK8705 fits everything with the exception of the 30ppm.

    I thought the 30 & 35 would be the same, but they aren't. Pulled the laser out of a 3550 (which is the only...
Results 1 to 25 of 163
Page 1 of 7 1 2 3 4