Search:

Type: Posts; User: copyman

Page 1 of 20 1 2 3 4

Search: Search took 0.64 seconds.

  1. Thread: Thread tools

    by copyman
    Replies
    2
    Views
    76

    Re: Thread tools

    I asked Admin something similar where it doesn't silence anyone or step on their rights. If you come to a technician forum and for some odd reason want to fight politics you have to "select" rants &...
  2. Re: KM bizhub C364e touch panel unresponsive

    Really a strange one. You would think if screen is bad it would never come on.

    Definitely worth a shot to do touch panel adj by powering on machine with firmware USB in "service port" and hold...
  3. Replies
    3
    Views
    113

    Re: bizhub C654e black screen

    If you hear machine go through normal warm up cycle try and log onto copiers web interface page. If you can get onto that page the control panel is most likely bad. If not try loading firmware.
  4. Re: Direct CHALLENGE to all those who just want to "diatribe"......

    Good thoughts but you are wasting your time. Not going to get that here without Mods or Admin realizing this forum is going downhill. There are a few assholes that hate Trump and ruin this forum with...
  5. Replies
    9
    Views
    395

    Re: M3550 Toner worms

    Very odd you would automatically have to replace drum after a year. Is there a known issue with that models drums / cleaning blades going bad after a year? Usually a drum is rated on amount of pages...
  6. Replies
    1
    Views
    206

    Pagewide MFP P77760Z streaks

    I posted about this machine in another thread. It sat for a few years because of wrong inks according to customer. So it's brand new, I was able to get the right inks online and got it working. It...
  7. Replies
    7
    Views
    433

    Re: World Snooker Championship

    Snooker as in billiards? Snooker not that big here in USA but I watch & play regular billiards, like 8 & 9 ball and of course straight pool. Been shooting pool for around 50 yrs. Was taught on a 4.5...
  8. [Misc] Re: Bizhub C258 high pitch whine when copying/printing

    Does it have the FS-543 finisher? The RU-513 relay units have a known issue with squealing noise. Believe there is a bulletin on it. Not your issue if no finisher
  9. Replies
    11
    Views
    2,786

    Re: Bizhub C253 Blue Font all over page

    Not sure if anyone else mentioned it because I have a few people blocked and can't read their messages but the original post is from 2013. Maybe you should start a new thread.

    I use to work on...
  10. Replies
    7
    Views
    287

    Re: Bizhub 364e letterhead & 2 sided?

    Thanks for the quick replies! Good information.

    Do you know if it will automatically duplex from by-pass tray?

    Learn something new everyday.

    Thanks again for the help.
  11. Re: Legit questions wait weeks, yet SPAM gets through without the need for approval?

    This is what happens on UN-moderated forums. The prisoners run the jail on this forum.

    You can send the moderator PM's everyday asking for help and you will never hear back. It's a real joke.
    ...
  12. Replies
    7
    Views
    287

    Bizhub 364e letterhead & 2 sided?

    Delivered this off lease machine. I initalized the machine and wiped all the settings when in the shop.

    Customer called a few hours later and said she put letterhead in tray 2 and set for...
  13. Replies
    8
    Views
    264

    [Error Code] Re: konica minolta c364e error C-E301

    There is a bulletin for this code. The special F/W that corrects it is: A61F0Y0-F000-GDH-M1
  14. Thread: Km c360

    by copyman
    Replies
    10
    Views
    379

    Re: Km c360

    I thought the same thing about dev dumped but how do you explain it only happening when copying? Original poster said prints are ok. Which wouldn't be the first time a poster / end user doesn't give...
  15. Thread: Km c360

    by copyman
    Replies
    10
    Views
    379

    Re: Km c360

    Have you done anything else? Since the quality is only bad when copying then I would look at the optics, clean the mirrors, CCD, etc.

    If you are not a technician then you may need to call one.
  16. Re: What chemicals do you use to keep your printer clean?

    Not sure if you mean to clean the covers but after many years using harsh chemicals I switched to all organic cleaners. Safer for me and the enviroment. Only difference now I have to scrub a lot...
  17. Replies
    13
    Views
    740

    Re: Konica Minolta C253 RAM Replacement

    I see your point but I only look at other technicians as members, not end users.

    Heck it's no different than asking for a donation for a manual or firmware which is done here quite frequently....
  18. Replies
    13
    Views
    740

    Re: Konica Minolta C253 RAM Replacement

    This is why several techs said you could use "exact" spec RAM. So bottom line is you were not using exact spec.

    Not sure you will get much help here next time unless you make a small donation....
  19. Replies
    6
    Views
    323

    Re: 224e "service notification failed"

    Got it! Exactly what I was looking for. Talk about a setting being hidden, this one is buried deep!

    Actually will use it a lot adding to my list of what I automatically check with off lease...
  20. Replies
    6
    Views
    323

    Re: 224e "service notification failed"

    I was just looking at a 224e in my shop and I don't see "start maintenance" to even get to ram clear. My customer didn't have it on their machine either. This is why I asked if there was a soft...
  21. Replies
    6
    Views
    323

    Re: 224e "service notification failed"

    Thanks for the reply. That is what I couldn't find. I saw that mentioned when I searched here. I have a machine in shop and will try and find Ram clear.
  22. Replies
    6
    Views
    323

    224e "service notification failed"

    Just delivered this off lease machine last week and customer called with this message. I've had it a few times before. Called customer and walked them through turning off serv notification but they...
  23. Replies
    16
    Views
    641

    Re: Vacuum Cleaner - need suggestions

    My vote is also 3M. I used a Convac for many years, good vac but 3M still better. Not sure if you know but you can buy replacement parts for 3M vacs, motors, switches, etc. Instead of $200-300 for a...
  24. Thread: Sharp AL1220

    by copyman
    Replies
    5
    Views
    146

    Re: Sharp AL1220

    Hey Chris, Sent manual to Tim's work email
  25. Replies
    18
    Views
    795

    Re: Political Compass

    Every copier tech I've ever met are conserative Republicans. Especially the self employed like myself. We don't want to live under a socialist government. We love capitalism and the ability to grow...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4