Search:

Type: Posts; User: copier tech

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. Re: MPC 307 multiple prints come out different calibration

    I don’t remember it taking that long to replace this clutch.

    Since you have it apart why not fit the new clutch as a training exorcise.
  2. Replies
    12
    Views
    644

    Re: 307ci Printing Random characters

    Well if all computers/laptops/ipads etc are all on DHCP, as they are by default, setting a printer as a static IP won’t cause an issue & since printers must have an address that doesn’t change this...
  3. Replies
    12
    Views
    644

    Re: 307ci Printing Random characters

    I use DHCP to pull the network details then set the IP static.
  4. Re: Canon IRA C350IF Blank or light streak down the middle

    So you are getting a white line/void ? Can you post a sample of the issue with say a PG10 sample.

    Have you cleaned the laser glass?
  5. Replies
    12
    Views
    644

    Re: 307ci Printing Random characters

    I would expect this to happen if you installed the Ricoh in place of the Kyocera & used the same IP address.
  6. Re: MPC 307 multiple prints come out different calibration

    I guess you checked the reg roller turns freely etc if not you could try lubricating /oiling the bushings if its stiff to turn.

    Traffic was busy today with the boat show on.
  7. Re: MPC 307 multiple prints come out different calibration

    Yes a bit time consuming to get to this clutch have to take a few boards of to access it is covered in the service manual.

    Maybe it has become dislodged during transport/delivery.
  8. Replies
    49
    Views
    6,851

    [Dead] Re: Konica Minolta C360i

    Ah OK thanks. Don't know why KM make if so difficult to recover some issues. if I'm working on a machine after hours & need to call them I have to return the following morning, painful.
  9. Replies
    10
    Views
    453

    Re: C227 internal error

    I'd start first by updating the firmware & then the function version.

    When scanning/copying the HDD is being written to so you could have a failing HDD.
  10. Replies
    12
    Views
    644

    Re: 307ci Printing Random characters

    As you say this is usually caused by a user having the wrong driver. It can also be caused with a user is printing via WSD not IP. So I would disable WSD printing to rule this out.

    & as always...
  11. Replies
    7
    Views
    341

    Re: KYOCERA 3060

    As others have said old model but caused by the drum/dev arching. You could try removing the drum/dev & vacuuming up any stray toner/paper dust.
  12. Replies
    11
    Views
    364

    Re: C2880i Color Displace Help

    We have the pricing on the website. You just need our 1x machine package.
  13. Replies
    11
    Views
    364

    Re: C2880i Color Displace Help

    Yes there are a few models in the series.

    We can provide you with the latest firmware & service manual.
  14. Replies
    11
    Views
    364

    Re: C2880i Color Displace Help

    Yes always worth trying firmware first.
  15. Re: Ricoh MP C2500 Error Code SC672 on Startup.

    SC819 is usually a HDD issue so you could try replacing that you can use pretty much any 2.5” but since you only got that error after moving a SW it could be caused by that.
  16. [Error Code] Re: machine showing wrong installation of DV unit magenta in c224e

    Have you updated the firmware?
  17. Re: Ricoh MP C2500 Error Code SC672 on Startup.

    Try to update the firmware if this fails replace the controller board.
  18. Replies
    11
    Views
    364

    Re: C2880i Color Displace Help

    What firmware version is the copier on ?
  19. Replies
    49
    Views
    6,851

    [Dead] Re: Konica Minolta C360i

    Would you mind sending this via PM please?
  20. Replies
    7
    Views
    428

    Re: Bizhub C4050i problem

    Sounds like you need to use the reset tool file.
  21. Re: Konİca mİnolta bİzhub c203 nvram reset program

    Happy to help please contact us at the links below.
  22. Replies
    11
    Views
    364

    Re: C2880i Color Displace Help

    Try a DC-CON CLR then run auto gradation adjust.
  23. Replies
    47
    Views
    7,043

    [Dead] Re: C250i does not boot...

    No, each model has a different tool

    50117
  24. Replies
    47
    Views
    7,043

    [Dead] Re: C250i does not boot...

    This pdf contains the part numbers of the recovery tools.

    We can supply any should you need one.

    50116
  25. Replies
    21
    Views
    1,032

    Re: Add more edge erase on printing? 8353ci

    I use U034 & U066 for this issue.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4