Search:

Type: Posts; User: mga

Page 1 of 20 1 2 3 4

Search: Search took 0.18 seconds.

  1. Replies
    1
    Views
    114

    Re: OS DISK IMGEPASS A1

    You can order from Canon FK3-0684-000 DVD, SYSTEM S/W
  2. Replies
    20
    Views
    891

    Re: Screwdriver of choice - Ricoh

    I've used for years and think the best
    Snap on ratchet long and short shafts and 5.5mm magnetic nut driver
  3. Replies
    6
    Views
    319

    Re: Canon IRA C5540I Code E000354-0002

    Note Canon is stopping people swapping over hdd on the newer machine you was ok like on the older machines ie irac5250 but on the newer from series 3 and dx versions you will you will need to reload...
  4. Re: Ricoh IM550f copier document feeder broken parts.

    I think it's a different series I will look on Kyocera and see if they have RTB
  5. Thread: ricoh pro 8002

    by mga
    Replies
    3
    Views
    296

    Re: ricoh pro 8002

    Pro 8002 you sure of the model
  6. Replies
    13
    Views
    588

    [Dead] Re: CANON C3330i Firmware

    Was it the correct hdd it has to be supplied by Canon for that series. If you taken from an other machine of the same model you may have to reload firmware on the newer machine Canon are stopping...
  7. Re: Ricoh IM550f copier document feeder broken parts.

    Its in the manual here you go
    Sorry do mean the hinge holder that sits in the copier side do you have pictures
  8. Re: MPC 307 multiple prints come out different calibration

    +1 should take about a hour only the transport motor and hvps but I have worked on a lot of them
  9. Re: MPC 307 multiple prints come out different calibration

    +1 spot on
  10. Thread: Hello There,

    by mga
    Replies
    5
    Views
    219

    Re: Hello There,

    Hello
  11. Replies
    4
    Views
    353

    Re: Shift Tray overrides Rotate Sort?

    I think that's the point of a shift tray to shift not rotate. Use without shift tray
  12. Replies
    10
    Views
    741

    Re: Ricoh MPC4503 scan problem

    You best to update with package firmware

    Also your firmware is well out of date
  13. Replies
    10
    Views
    741

    Re: Ricoh MPC4503 scan problem

    Of course it can scan to 2016 ricoh would not say that.
    Probably firmware or a firewall
  14. Replies
    23
    Views
    1,150

    Re: MPC2003 white image repeat

    Was it a new complete pcdu ie pcu and dev assembly. Or was it taken out of another machine
  15. Replies
    10
    Views
    570

    Re: MP C4503 web access denyed

    You can log in admin tools from copier you may have to reset customer & admin settings in factory mode no big problem you will have to visit machine
  16. Thread: MPC3004 mac driver

    by mga
    Replies
    7
    Views
    387

    Re: MPC3004 mac driver

    If ps3 option not fitted use air print not as good missing fonts etc
  17. Thread: MP C307 locked

    by mga
    Replies
    7
    Views
    410

    Re: MP C307 locked

    +1 as sandy said factory sp mode you are in service sp mode its different login code
  18. Replies
    10
    Views
    720

    [Misc] Re: MP C4503 Folding Paper

    That fault as in centre of paper would be the 3 belt rollers on the main door lower section
  19. Thread: Ricoh MPC3003

    by mga
    Replies
    16
    Views
    981

    [Jamming] Re: Ricoh MPC3003

    Check the black drive drive on door is springing back and forward.
    Check the top output tray isn't blocking the the path as paper comes out before going back in.
    What's the fuser parts life
  20. Replies
    4
    Views
    236

    Re: Canon MF-733CDW PARTS

    I send service & parts now by pm
  21. Replies
    11
    Views
    662

    Re: Toner swap Ricoh Savin Lanier

    If the Lanier is the same model as the ricoh it should work without doing anything
  22. Re: RICOH Firmware Update Tool allows users to install firmware updates themselves.

    Yes you can load older firmware
  23. Thread: ri2000 garment

    by mga
    Replies
    5
    Views
    328

    Re: ri2000 garment

    These are not very popular t shirt printers I don't know any engineers that works for ricoh I know someone who has the ri3000 and been waiting 2 weeks for ricoh direct engineer I think it's a very...
  24. Replies
    7
    Views
    326

    Re: mp 6055 fuser issue

    Did you fit sleeve or sleeve assy best to fit pressure roller at the same time
  25. Replies
    4
    Views
    424

    Re: MP 6503 SOP OS reinstall

    Hope this helps sorry just noticed you want Mono mp
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4