Search:

Type: Posts; User: vk4akp

Page 1 of 2 1 2

Search: Search took 0.22 seconds.

  1. [Dead] Re: Kyocera M6526CDN Error F375 & F246 & (Y) Toner improperly installed.

    I have spent the evening searching for OEM toners.
    Very uncommon here. There is a huge market for non genuine and many on offer. 😞

    However I have just found OEM on clearance from Officeworks for...
  2. [Dead] Re: Kyocera M6526CDN Error F375 & F246 & (Y) Toner improperly installed.

    Fair enough. I totally understand.
    The printer btw was donated for only a $20 gesture to the original company.
    It has done <6000 pages.
    So even if it did meet an early death the group is not...
  3. [Dead] Re: Kyocera M6526CDN Error F375 & F246 & (Y) Toner improperly installed.

    Pick the fake :rolleyes:

    I can't see the difference and it still has me beat why the "Improperly Installed" error from the after market one.

    50325
  4. [Dead] Re: Kyocera M6526CDN Error F375 & F246 & (Y) Toner improperly installed.

    Excellent. Thank you.

    Yes this cleared the error and allowed the printer to work again with FAX card installed.

    Yes the non OEM Toner is necessary unfortunately.
    The printer was donated to a...
  5. [Misc] Config Backup? How? Kyocera M5526CDW, M6526CDN, FS-C5016N

    Hi, Just wondering if anyone knows how to backup the quiet extensive configurations within the Kyocera printers?
    I have never been able to find a menu option on the web interface, control panel, or...
  6. [Error Code] Kyocera M6526CDN - Firmware wanted. re: F375 FAX Bug.

    Hi, We have a Kyocera M6526CDN that is now throwing the F375 error on boot after bumping the Fax button while closing the lid during a (Y) Toner change.
    Apparently this is a common problem.
    ...
  7. [Dead] Kyocera M6526CDN Error F375 & F246 & (Y) Toner improperly installed.

    Hi, We have a Kyocera M6526CDN that has not even done <6000 prints.

    It was working perfectly until we went to replace the Yellow Toner.
    Then we got the "The Toner Container is Improperly...
  8. Replies
    47
    Views
    8,357

    Re: FS-C5016n black toner hanging like spiners web from paper?

    Hi Guys.

    Still playing with these FS-c5016N's.

    I think we have about 4 units now (3 for parts).

    The one we use has developed a new problem.

    When printing as specially when it has sat...
  9. Replies
    47
    Views
    8,357

    Hi Guys, wow it's been so long! Well some good...

    Hi Guys, wow it's been so long!

    Well some good news!

    We now have a 3rd (Number #3) Kyocera FS-c5016N !!! Isn't life wonderful!!. ;)

    It's print is the worst of all. But we have not stripped...
  10. Replies
    47
    Views
    8,357

    Can FS-c5025N be used For parts?

    Hi guys! Still at it.

    The main FS-c5016N is printing ok for now but it does have a faint stripe (lack of megenta we think) across but offset from the center of the page.

    We think this will...
  11. Replies
    47
    Views
    8,357

    Printer #1, We have some progress! ;)

    Well, I know where the problem lies with printer #1. (Paper creasing).

    It is definately a plastic ribbing guide that is gouging the paper.

    It's funny, we've been looking at all the major...
  12. Replies
    47
    Views
    8,357

    Belt cleaning unit

    Hi,

    We tried swapping the belt assay and belt cleaning unit between the two machines. The dirty print fault stayed with the same machine (Printer #2).

    This is so very strange. I'm sure it's...
  13. Replies
    47
    Views
    8,357

    Printer #2 Magenta Dev unit.

    Sorry I stand corrected. On Printer #2 the lack of Magenta is the Magenta developer unit. The seller included a technicians report that lists this as a fault from 2005. He originally said it was lack...
  14. Replies
    47
    Views
    8,357

    No, We have pregressed well, and almost there!

    No, I don't think you have followed the thread fully.

    We have good colour and good colour alignment on both printers after a clean and rebuild and align.

    Printer #1...
  15. Replies
    47
    Views
    8,357

    Swapped transfer belt assay and belt cleaner.

    OK, I just swapped the transfer belt assay and belt cleaner assay between the two printers.

    Once again, the faults did not move. So these can be ruled out as well.

    On printer #1 (paper...
  16. Replies
    47
    Views
    8,357

    More n more Puzzled!

    OK Guys. I'm getting really puzzled where to look now.

    Stripped down again #2 Printer (Dirty fantom marks on print).

    Cleaned out main waste duct, Waste ducts in drum units, & main transfer...
  17. Replies
    47
    Views
    8,357

    Committed to getting them working now unfortunately.

    HI Guys, Yes I know we are putting a lot of work into these. But we are committed to them now. We have put too much time and money into them. Both were sold to us as in supposedly good working order....
  18. Replies
    47
    Views
    8,357

    Wandering, dirty print on back, swapping parts?

    HI, Thanks for all the help.

    I initially pulled the toner carts out and noticed the drum units not seated properly (green clips popped out).

    I reseated and aligned and we got one good print....
  19. Replies
    47
    Views
    8,357

    2nd FS-c5016n, print badly missaligned.

    Hi, Back again!

    Our second FS-C5016N finally arrived today.

    The printouts are very badly misaligned.

    We have tried the alignment menu but the print is so far out I have no idea what to set....
  20. Replies
    47
    Views
    8,357

    I won't tell you what the Slang term `Sprog'...

    I won't tell you what the Slang term `Sprog' means in English then. hehe. ;)

    .-.-.
  21. Replies
    47
    Views
    8,357

    Got the Flash, TNX

    Got the Flash file, tnx.

    Hey just a thought, these things aren't country specific are they?

    .-.-.
  22. Replies
    47
    Views
    8,357

    FS-C5016N firmware, & FS-1800N IB-22/23 Net Card

    OK. Thanks. Yes this is all very interesting stuff.

    If you can send me the updated firmware for the FS-C5016N I'd love to have it thanks.

    We run the printers on the network here (no USB /...
  23. Replies
    47
    Views
    8,357

    Toner lock leaver b4 transit??

    Hi,

    No that's OK. Honesty is important.

    Hopefully we will do ok out of them though having two units.

    I've had to clean the led array on the first one and although a reasonably big job for...
  24. Replies
    47
    Views
    8,357

    Oh OK. Thanks for the heads up. Shame it's a...

    Oh OK. Thanks for the heads up.

    Shame it's a bit late though but that's life.

    Oh well we have two now to play with and with spare toners.

    (Just waiting on delivery of the second one).
    ...
  25. Replies
    47
    Views
    8,357

    Another FS-c5016N on the way.

    HUmm. Why is the FS-c5016N crap? Whats crap about them?

    And too late. WE just bought another 5016.

    Should arrive in about a week.

    This one has a brand new boxed Duplexer, 3x spare brand new...
Results 1 to 25 of 30
Page 1 of 2 1 2