Search:

Type: Posts; User: _SuabE_

Page 1 of 5 1 2 3 4

Search: Search took 0.02 seconds.

  1. Thread: IR 2020i

    by _SuabE_
    Replies
    2
    Views
    457

    [Misc] Re: IR 2020i

    Sticky foam on electromagnetic clutch paper feed
  2. Replies
    1
    Views
    345

    Re: Canon ir 1022 if

    You need to download firmware

    Good luck
  3. Replies
    2
    Views
    468

    Re: Canon IR 1030 Fi

    Hope this will help ( DepositFiles)

    Cheers
  4. Thread: HP CM6030 50.A

    by _SuabE_
    Replies
    9
    Views
    1,104

    Re: HP CM6030 50.A

    Initialize the NVRAM
  5. [Error Code] Re: ir3045 noisy sound then code error 000-0001. help pls

    the worn out ball bearing of the pressure roller creating the noise just replaced it then do a reset error
  6. Thread: RZ200ep

    by _SuabE_
    Replies
    5
    Views
    1,601

    [Error Code] Re: RZ200ep

    ink sensor cannot sense the ink, check ink or ink sensor, or ink is blocked even inking has performed
  7. Replies
    5
    Views
    1,926

    [Misc] Re: Riso RZ 300ep drum says "no ink" but it has.

    Check your ink pump, and ink hose it is clogged or the ink supply outlet inside the drum is clogged. If you noticed it will keep on initializing the ink then it will stop then, giving a no ink...
  8. Replies
    2
    Views
    503

    Re: Canon IR Series Firmware

    Please see your message
  9. Replies
    4
    Views
    838

    [Error Code] Re: Shutdown Error in IR3225

    Replace the RAM
  10. Thread: Hi there!!

    by _SuabE_
    Replies
    8
    Views
    563

    Re: Hi there!!

    Welcome Back Peter
  11. Replies
    4
    Views
    978

    Re: How to change SHARP MX2310U' IP

    settings
    network settings
    log in as
    username=admin
    password=admin
    connection type = wired
    configure ipv4 settings
    update
    reboot
  12. Thread: drum board

    by _SuabE_
    Replies
    4
    Views
    953

    [Error Code] Re: drum board

    Is this a colored drum? if this is a colored drum, dip switch is not set to the proper color, or the ink color is different from the setting of the dip switch
  13. Replies
    9
    Views
    781

    Re: Designjet 500 Colors Misaligned

    Is the carriage assembly running smoothly during initialization, no tilting movement during home position? Is this problem comes out after carriage belt replacement? if it is check the carriage belt...
  14. Re: IR 1024iF Meldung : Justage läuft , Warte auf Scanner

    Check scanner data cable connection (clean) renew lubrication and clean optical.
  15. Thread: Canon IR 4570

    by _SuabE_
    Replies
    25
    Views
    2,541

    Re: Canon IR 4570

    Bad idea Be HONEST anyway..
  16. Replies
    1
    Views
    566

    Re: Re Canon IR Series Firmware

    I do have the firmware

    cheers!
  17. Replies
    2
    Views
    1,181

    Taskalfa 3500i No Display Indicator LED On

    Anybody experience this on Kyocera Machine especially TASKALFA 3500i
    FAULT
    No Display as in no power but scanning lamp is on
    Heater not turning on
    What should be possible causes?
    Already checked...
  18. Thread: Canon MFP 8450

    by _SuabE_
    Replies
    2
    Views
    408

    Re: Canon MFP 8450

    Shinu hal? What happened any news?
  19. Thread: Canon MFP 8450

    by _SuabE_
    Replies
    2
    Views
    408

    Re: Canon MFP 8450

    Just Clean the Optical path, mirrors, etc.

    regards,

    Ike
  20. Replies
    7
    Views
    2,951

    Re: Riso GR3770 clamp error/master mis-feed

    Check the orientation of the drum if it is in home position exactly, this is common error in Riso GR models, the misfeed during master clamping because the drum is not in his home position, check the...
  21. Replies
    12
    Views
    1,926

    Re: IR3245 sst files to update via usb

    email me, what you are looking for is with me....
  22. Thread: RIP, Yogi

    by _SuabE_
    Replies
    5
    Views
    721

    Re: RIP, Yogi

    RIP
  23. Replies
    10
    Views
    2,045

    [Misc] Re: Bizhub 751 Compact Flash Problem

    Do you have another machine Bizhub 751 working? it will help.. to format the CF, i can show it to you remotely on your pc..
  24. Replies
    7
    Views
    855

    Re: Firmware Canon PC D440

    First what printer did you connect? showing a new hardware found Canon MF4370, this means the hardware detected is compatible with MF4370, you should continue installing, did you cancelled the setup?...
  25. Replies
    7
    Views
    855

    Re: Firmware Canon PC D440

    try to use MF4150_FirmwareUpdateTool_V062, available on Canon Eu website..
Results 1 to 25 of 119
Page 1 of 5 1 2 3 4