Search:

Type: Posts; User: REGSIS

Page 1 of 11 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    9
    Views
    175

    Re: Konica C224e reboots, SSDB?

    I always install latest Mass production FW which is M1 for this model. It has SSD FW in the package.
  2. Replies
    20
    Views
    802

    Re: Waste Toner Disposal

    When I collect 20 kg I call a company which safely condition toners drums and other electronics.
    I have to pay them 0.5 per kg.
  3. Re: Bizhub 195 C 5351 error after connecting duplex module

    Have you install the fan which comes with it?
    It is mounted below output tray by removing left cover.
  4. Replies
    1
    Views
    271

    Re: i series drum conversion?

    Disassemble new K unit and old CMY unit.
    Replace:
    Drum cylinder
    Cleaning blade
    PCR primary charge roler
    PCR cleaner

    This way it definetly works.
    I didn't have a chance to study the...
  5. Re: BH-C-280, copying by using the ADF comes in color but scans are mono. Huh?

    Don't scan to their programmed destination.
    Instead use USB and choose desired settings.

    There shouldn't be separate scan setting for ADF because you can merge originals from glass and ADF into...
  6. Re: Strange prints think developer might be empty

    Can happen with new drums too. Had many of these on countert above 200k total.
    Always cleaned dev unit and drum unit (charging unit) soiled with cyan toner.

    Vacum excess toner on dev unit...
  7. Replies
    47
    Views
    2,057

    Re: Bizhub 364e - clicking/knocking noise at idle

    From what you described, your bearing is fallin apart. That's where the dust comes from. In my cases the front one was allways the problem. That were the fusers between 400-500k so never bother to...
  8. Thread: Bizhub 458

    by REGSIS
    Replies
    21
    Views
    881

    Re: Bizhub 458

    Yep, JPG cca 2MB. I will scale down the pictire on PC and post it. This broken piece could be also a reason for J20-02 when paper is pulled out from 2nd drawer.
  9. Thread: Bizhub 458

    by REGSIS
    Replies
    21
    Views
    881

    Re: Bizhub 458

    Right side door has 3 hooks which clicks behind plastic so that the door is pressed tighly to the main body. Hooks on door are fine. Check the right front bottom cover (lower right front side of the...
  10. Replies
    15
    Views
    760

    Re: Just got 15 Bizhubs and need help

    Any SATA hdd with 256 GB and above. 320GB and 500GB tested but machines uses only 256 GB of space anyway.
    Only 283 comes without HDD, but it can be installed as an option. You'll need a mounting...
  11. Re: Fusing problem on C3070 repeated on different machines of same model.

    Replace all lower separator claws.
    They are slightly modified if I remember correctly.
  12. Thread: BizHub C368

    by REGSIS
    Replies
    7
    Views
    465

    Re: BizHub C368

    IIRC the app is called "Photos" and when you print a jpeg from it to bizhub 226 it doesn't spool the job at all.
    If you must use it, use it just for viewing.
  13. Replies
    11
    Views
    567

    [Misc] Re: Discolored band coming in print from C258

    Sorry, are you an end user or a technician?
    If you are an end user and macine is on contract, report a problem, and let the technician solve it.
    If you are a technician then you should try with...
  14. Replies
    11
    Views
    567

    [Misc] Re: Discolored band coming in print from C258

    Generally you're right, but..... an usual problem could be easily solved and never be posted here.
    This is rare, and drum is an easy thing to try.
    I couldn't be 100% sure, but this hapened to me...
  15. Replies
    11
    Views
    567

    [Misc] Re: Discolored band coming in print from C258

    Printout the halftones for CMYK value between 64 and 128. You will not notice this effect if you leave it on 255 (full tone). It looks like black component is missing. Check drums and developers...
  16. Re: Bizhubpress C2070 and C3070 du-105 drum and coronas not reaching end of life.

    Charge coronas sometimes reach 90-100%, but drums can fail as soon as 30% is reached. That is of course for halftone prints. For non-demanding prints you will not notice any difference.

    Before...
  17. Replies
    18
    Views
    955

    Re: Black drums used as color

    When you replace belt and all 4 drums and you get nice clean image without darker lines then you cannot say it is a hardware issue. You may get some light lines even after 20k. That is about 30% of...
  18. Replies
    18
    Views
    955

    Re: Black drums used as color

    On high coverage machines laser beam struck the drum surface x times more than low coverage ones.
    So it is normal that your drums last less then "regular" customers.

    One technician told me that...
  19. Replies
    18
    Views
    955

    Re: Black drums used as color

    Why do you need to change them?
    What is the problem?
  20. Re: Konica Minolta Bizhub C454 falsely saying low Cyan but it's full & very light pri

    First thing you should do is to take out cyan developing unit and visualy check toner brush on magnet roller.
    If it is evenly covered than youa are dealing with toner hopper issue. Mainly that is...
  21. Re: Bizhub C220 cyan color registration shift on one side after black drum replace

    In service mode check Counter --> Warning if there's any P-14 counts.
    If there is you should use Print head reset option.
    After few clicking sounds power off/on the machine and do image...
  22. Replies
    8
    Views
    446

    Re: Minolta di2010 on windows 10

    Di2010 isn't 64-bit compatible, only 32-bit drivers come to play.

    Never tried this, anyway.
  23. Replies
    11
    Views
    751

    Re: C364 not printing black

    Agree!
    Solenoid which releases and stop black dev clutch would be my first suspect on a high meter machine (or old one).
    C364 is 7 years old at least.
    Open PWB box and take out the solenoid....
  24. Replies
    23
    Views
    1,376

    Re: C250i Color registration error P-21

    If you want to save and continue to use that drum unit K, you may try to take it apart.
    My best guess is that primary charge roller is creating a problem. Drum and drum cleaner should be ok.
    You...
  25. Replies
    9
    Views
    569

    Re: Fuzzy Prints / White Spots on Black only

    With failed developer (black) drive clutch within few prints it will be completly blank because it would prevent magnet roller to turn. But check anyway.

    As mentioned above try to swap transfer...
Results 1 to 25 of 253
Page 1 of 11 1 2 3 4