Search:

Type: Posts; User: oldschool

Page 1 of 10 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    4
    Views
    166

    Re: Key counter if option

    Actually when using a coin op, Key Counter I/F Vendor is used. Konica Minolta engineering clued me in on this. If just key counter is used with a coin box the copier will jam when funds run out....
  2. Thread: key counter

    by oldschool
    Replies
    14
    Views
    902

    Re: key counter

    Pins 1 and 2 are correct. Do not short any other pins together. Pins three and four are for the count. Pin four will drop low and allow the copier to send a 24 volt pulse to the counter. You've tried...
  3. Thread: key counter

    by oldschool
    Replies
    14
    Views
    902

    Re: key counter

    The 20 pin M12 connection outputs level signals for paper size. There are 4 lines that go high or low. Depending on that combination, a vend device can determine what paper size has been selected.
    ...
  4. Re: Optional counter type a (413012) in ricoh mpc3003

    SP5-113 set to option 4 (coin rack) for default optional counter type.
    User tools > System settings > administrator > (sometimes key-op tools) external charge unit management. Highlight what is...
  5. Replies
    4
    Views
    332

    Re: c3350i - C3320 vending question

    I let the customer know.

    Thanks for the reply!
  6. Replies
    4
    Views
    332

    Re: c3350i - C3320 vending question

    A co worker said I should have mentioned that you don't need a vend station attached to test this. I didn't think I needed to but it gives me a reason to bump this. ;)
  7. Replies
    4
    Views
    332

    c3350i - C3320 vending question

    I do not have access to this machine but a customer has asked me a question. Basically when the copier is in vendor 2 mode with scanning is set so that it is not controlled by the vendor, can...
  8. Thread: Bizhub C224E

    by oldschool
    Replies
    13
    Views
    993

    [Misc] Re: Bizhub C224E

    Depending on the type of vending you may be able to disable it in the admin mode. If Vendor 2 was used, Log in as admin. Go to security > Function Management settings (or management function...
  9. Replies
    1
    Views
    986

    Re: 3252ci Jamex coin op

    I will assume this is our EnvisionWare version of the model 9557 please correct me if I'm wrong (6 buttons on the Jamex main board). I doubt this is a copier issue. A Kyocera can not cause a vend...
  10. Replies
    32
    Views
    3,421

    [Jamming] Re: Aficio MP5001 No feed jam

    I agree there are some rollers that can't be helped. My situation was a large territory and I needed to keep the customer running. Even on worn out rollers I could usually buy 3 or 4 days. This would...
  11. Replies
    32
    Views
    3,421

    [Jamming] Re: Aficio MP5001 No feed jam

    This reply isn't really specific to this thread but when I was in the field I discovered that "Brasso" cleans feed rollers quite well. I used to carry it to polish drums. We used to use fedron to...
  12. Replies
    11
    Views
    1,264

    Re: ricoh 3352 external devices questions !!

    The setting in SP5-113 (default optional counter type) for a key counter connection is usually ext key card deduct option 11. Then in user tools - system settings - Admin, you'll need to highlight...
  13. Replies
    9
    Views
    816

    [CQ] Re: External counter install

    I did want to mention that the True count uses the Vendor II connection and not the key counter connection as the key counter doesn't really differentiate between color and B/W copies. For a B/W only...
  14. Replies
    9
    Views
    816

    [CQ] Re: External counter install

    We sell a remote copy counter that is used in a lot of UPS stores. It's called a True Count. It's basically a box with a button to enable the copier and sits next to the cash register. As copies are...
  15. Re: BizHub 1050 with Please insert key counter message

    Wow this is an old thread. The information is a bit outdated for newer models. Now a days there is a service mode setting to turn on/off the key counter option. I don't have any details on accessing...
  16. Re: Konica Minolta C364 or c364e which Coin box works on these models

    The Key counter interface (analog) on a Konica Minolta will only charge one price. The copier would use the Key Counter I/F Vendor setting when connecting a coin box or it will jam when funds run...
  17. [Misc] Re: Sharp MX-5050v with ITC Systems 5400 series coin op control

    I only have a guess. Are you using a DVEND kit from Sharp. I've taken several calls that turned out to be a poor connection in the fuse holder. this stopped it from providing 24 VDC tot he DVEND kit....
  18. [Misc] Re: C364e cannot authetificate account tracking department id

    As Synthohol stated, Stop 9 once in service should bring up built in billing mode.

    Not relevant to your question but worth mentioning...
    For C3350/3850/4050/4750 press 22200 to access billing...
  19. Replies
    2
    Views
    561

    Re: Canon IRA C5535 Coin op

    There was a connection on IR advanced Canon models that had separate lines for color but it worked as you've described. If there was only enough money for bw it would only send a charge signal when...
  20. Re: Department codes in tandem with vending.

    I neglected to note that but if memory serves it was a ES3510C,
  21. Department codes in tandem with vending.

    A dealer called that installed one of our vend stations. Their customer also wanted to be able to use department codes. When vending is turned on department codes do not stay enabled. Can anyone tell...
  22. Replies
    14
    Views
    2,032

    Re: just curious...

    Landa Kit!
    I worked at the Savin factory in Binghamton NY in 1981. I started out learning copiers by keeping the test 800s and 870s running. Later a rep came in and a group of us took classes and I...
  23. Re: canon image runner Advance c3525 with coin box can't fax

    I would like to know the answer to this as well. We have been contacted twice regarding this issue. User management is not available when vending. A field tech told me he turned off vending to access...
  24. Replies
    2
    Views
    446

    Re: MP C401SR setting up ICE

    Yes this is the documentation I have. My problem, no browser NX app on this copier.

    Can it be downloaded and installed via SD card?

    Could someone have installed standard firmware and not SOP...
  25. Replies
    2
    Views
    446

    MP C401SR setting up ICE

    I was asked to install the ICE trial on this copier. The problem is this copier does not have the "Cloud Apps" icon. According to the documentation, I have a "Smart Operation Panel Gen 1" and the...
Results 1 to 25 of 241
Page 1 of 10 1 2 3 4