Search:

Type: Posts; User: anothertech

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    20
    Views
    1,031

    Re: Screwdriver of choice - Ricoh

    I have to keep a separate Dr bag tool kit for Plockmatic, everything is different.
  2. Replies
    20
    Views
    1,031

    Re: Screwdriver of choice - Ricoh

    That old Royal was a good machine.

    I use this Vessel No.220 Ball-Grip Screwdriver (JIS) (+2)x200 300mm Long
    $14.00 US at Amazon.
  3. [Misc] Re: Can anyone explain the copier process like what type of charge is genrated

    I can never seem to remember what charge is on the drum or if you block the slit glass will it be white or black on the paper. I don't think remembering all of that is necessary to service MFP's...
  4. Replies
    24
    Views
    1,249

    Re: MPC2003 white image repeat

    This is a long shot but, could it be that the PCU heater is not working?

    50224
  5. Replies
    24
    Views
    1,249

    Re: MPC2003 white image repeat

    There is a discharge lamp for each PCDU and that could be the problem. Try turning on the discharge lamp on service mode.
  6. Re: Ricoh Firmware Update Tool!! Oh wait, it doesn't work.

    Yes good point, a small SD card is needed. you would think Ricoh would have changed to accept larger cards by now.

    Did you get the machine updated?
  7. Re: Ricoh IM550f copier document feeder broken parts.

    What is wrong with the feeder, will this tech pub from the MP 402 help?

    50206
  8. Re: MPC 307 multiple prints come out different calibration

    Don't go to Mexico, no one goes there anymore...too crowded.
  9. Replies
    10
    Views
    746

    Re: Ricoh MPC4503 scan problem

    It should work, are you sure about the firmware versions?
  10. Replies
    7
    Views
    413

    Re: MP C307 locked

    I sent him a private message with factory mode instructions, he said it worked, he's all fixed.
  11. Replies
    7
    Views
    314

    [Electrical] Re: Pin voltage testing on boards

    If you go to Amazon and search needle tip meter leads you will find plenty.
  12. Re: Ricoh MP C2500 Error Code SC672 on Startup.

    What is that setting labeled? and how to set from off to off?
  13. Re: Reason I haven't been around for a little while

    Sorry for your loss Debs. Tell us some stories about your dad when you come back.
  14. Replies
    4
    Views
    315

    Re: Thoughts on Plockmatic?

    They are still built with steel, but the motors and sensors seem to be less reliable. They are a different animal, it's hard to get real proficient on them when I only have a few out in the field....
  15. Replies
    4
    Views
    315

    Thoughts on Plockmatic?

    The current production machines from Ricoh, 7200, 9200, 8300, run really well but the weak spot seems to be the Plockmatic. When they are used heavily the Plocks don't seem to hold up too well, I get...
  16. Re: RICOH Firmware Update Tool allows users to install firmware updates themselves.

    I have not had an issue arise yet, seems pretty solid so far.
  17. Re: Lanier LD620C Scanner Issue Using Auto Density

    Be very careful cleaning those reflectors, very easy to scratch. Also clean the laser slit glasses.
  18. Replies
    5
    Views
    332

    Re: ri2000 garment

    I'm thinking wrong forum!
  19. Replies
    15
    Views
    760

    Re: Ricoh MP 2553 rebooting

    1+ I've seen the ESP line filter cause that more that once,
  20. Replies
    15
    Views
    760

    Re: Ricoh MP 2553 rebooting

    Go in to service mode IO section, run the motors one at a time to see if if reboots of see if the motor won't run.
  21. Replies
    16
    Views
    904

    Re: imc3000A firmware package latest

    Come on man, unzip the downloaded file, then click on the RFUT application file.
  22. Replies
    16
    Views
    904

    Re: imc3000A firmware package latest

    Just turn on SP5886-111 it will stay up to date automatically.
  23. Replies
    4
    Views
    331

    [Dead] Re: MPC 4502 Firmware update error

    Good point, maybe they could connect their laptop to the machine and the use their cell phone hotspot to get to the internet. Then try running the update tool again.
  24. Replies
    7
    Views
    383

    Re: Read HDD from MPC 3504

    This might not be honorable intentions, might be someone trying to get us to tell them how to hack a business.
  25. Re: complete swap of mpc3501 pcdu into a mpc3502

    Yes, now that you said that, I remember that I was doing the wire swap to change black drum to color drum.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4