Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 0.31 seconds.

  1. Replies
    4
    Views
    269

    Re: Kyocera C8525mfp

    Throw in an extra MC-8325 primary charge unit (302NP93020). It sounds like a typical magenta charge roller failure.
    Is the interval 37.5mm?

    If the transfer cleaning unit is full, also check the...
  2. Re: Simulations to do after prforming maintenace

    It would probably help to know what model(s) you are referring to. =^..^=
  3. [Error Code] Re: Intermittent C9404 code on 654e(NO color, Just black & white)

    On a bizhub 654e (B&W version) I've resolved this issue with firmware.

    On a bizhub 284e (B&W version) I replaced the CIS, cable to the CIS, and DISPB as a set. Replacing these parts individually...
  4. Replies
    4
    Views
    269

    Re: Kyocera C8525mfp

    Buying the parts separately is almost twice the cost of the kit. Many dealers buy mostly kits then use what they need out of them.

    Your MK-896A kit will include:
    DK-896: K Drum
    DV-896K: K...
  5. Thread: Cheaters

    by blackcat4866
    Replies
    20
    Views
    2,740

    Re: Cheaters

    I don't know what happened to my Canon cheater. I have two of the Konica Minolta versions. For the last couple of decades I've used either 1/4" vinyl tubing or 1/8" rubber fuel line. =^..^=
  6. Re: 6235 can someone explain how the transfer voltage works

    I don't know about your meter, but on continuity my meter is only good up to 100ohms. =^..^=
  7. Re: 6235 can someone explain how the transfer voltage works

    I used to have a photo .... sorry, I can't find it. There was a Gemini and a Mebius, in which the customer had slammed the rear cover hard enough to shatter the secondary transfer bushing that you...
  8. Re: Konica Minolta C454e IC CARD Reader Driver

    He had to change the hard drive, hence no Loadable Device Driver, and no proof of what driver it used. =^..^=
  9. Re: A Samsung, a Kyocera, and a HP copier all walk into a bar...

    I remember. At the time I was working on Mita DC-121. 131, 161, 111 ... all with open hoppers. Just pour in the toner. Do you remember the technique they taught us? "Roll the bottle as you pour, so...
  10. Re: C3070L - faded white diagonal stripes on thick paper, only on yellow color

    It's probably not transferring all the yellow toner, probably primary transfer from the yellow drum to the primary transfer belt.

    What are the yields on the primary transfer belt parts? Quite...
  11. Re: A Samsung, a Kyocera, and a HP copier all walk into a bar...

    The worst thing about wrong polarity toner is the only place it absolutely DOESN'T WANT TO BE is in the developing unit. It looked like the developing unit exploded. =^..^=
  12. Replies
    1
    Views
    180

    eS3505AC Fax icon faded out

    I found this a really interesting one!
    The weird part is that it receives just fine, but doesn't print. And there's no residual print job in the queue.

    I started with the standard stuff:
    Fax...
  13. Replies
    2
    Views
    215

    Re: bizhub 363 no eleva casset

    +1

    =^..^=
  14. Replies
    4
    Views
    361

    Re: Kyocera 2554 machine failure

    +1
    The manual also refers to feed image PWB. =^..^=
  15. Re: A Samsung, a Kyocera, and a HP copier all walk into a bar...

    I hope they never run out of toner. You'll never know what ended up in the hopper.

    I remember a Toshiba Alabama series with negative copies. I asked the customer if they had refilled the toner...
  16. Re: Konica Minolta C454e IC CARD Reader Driver

    What kind of card reader is it? Yes, it matters. =^..^=
  17. Replies
    6
    Views
    354

    Re: 8508A blur image

    I agree. We've seen this on all the sleeve fusers. When the teflon sheet gets dry it slows the fuser drive. On this fuser you may also find worn or broken gears, or the fuser drive bushings difficult...
  18. Re: Any machine with the Internal Finishers...

    Bizhub c224e, FS533 (internal finisher) stacking/offset sort issue.
    =^..^=
  19. Re: Any machine with the Internal Finishers...

    Any specific MFP, any specific internal finisher? There are a lot of posts on this, at least as it applies to the 4e series. =^..^=
  20. Replies
    11
    Views
    691

    Re: Kyocera Ecosys 6535- Pauses

    A couple of our techs were losing the spring consistently, during the roller change. =^..^=
  21. Re: Kyocera dp-7100 jam 6910(sub code 01)

    I've had a bad punch PWB cause the finisher to act strangely. If you have a punch you might try powering OFF > disconnect the punch > run U906 > and power back on again to see if it changes your...
  22. Replies
    11
    Views
    691

    Re: Kyocera Ecosys 6535- Pauses

    I think the spring he's referring to is the spring on the pickup roller/feed roller assembly. It presses the pickup roller down against the paper stack.

    50203
  23. Replies
    3
    Views
    362

    Re: keep safe FIRMWARE

    AFAIK if the techs can't copy the USB stick, neither can the MFP. If you don't trust your techs maybe you should have different technicians. =^..^=
  24. Replies
    3
    Views
    362

    Re: keep safe FIRMWARE

    Who are you trying to keep the firmware safe from? Do you have a firmware thief ransacking your PC?

    =^..^=
  25. Replies
    9
    Views
    405

    Re: ADI HDD and SATA HDD

    This is your third post on the same topic. Do you think that if you keep asking, that you'll get a different answer?
    I'm done answering since your not too interested in the replies. =^..^=
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4