Search:

Type: Posts; User: allan

Page 1 of 20 1 2 3 4

Search: Search took 0.07 seconds.

  1. Replies
    23
    Views
    1,548

    Re: Konica C220 print quality problem

    Did any one mention its the DV311K?
  2. Replies
    43
    Views
    1,818

    Re: Funny stories I tell customers

    There was a case in South-Africa where an OcÚ burnt down an entire building. The wide format laser printers used a radiant fuser.
    Basically a massive toaster oven. When the paper gets stalled in the...
  3. Replies
    25
    Views
    1,877

    Re: Konica Minolta bizhub C360 - Paper Jam 11-01

    The springs that push the needle bearings out can get sticky. Paper dust i guess. Using IPA or even WD-40 flushes out the muck buildup in there. Also will not use oil in there but get away using...
  4. Replies
    25
    Views
    1,877

    Re: Konica Minolta bizhub C360 - Paper Jam 11-01

    Yes that will be affordable to do but the shaft only in my experience. Don't get it often that a clutch will fail before 250K. Found that my method works ok.

    Those one way clutches last forever.
  5. Replies
    25
    Views
    1,877

    Re: Konica Minolta bizhub C360 - Paper Jam 11-01

    The one way bearings polishes the shafts to a mirror finish. On a smooth surface like that the needle rollers in the one way bearing(clutch) simply does not grip and slips on the polished surface.
    ...
  6. Replies
    9,772
    Views
    513,590

    Re: Latest on the Corona Virus

    Hehe is this guy for real. If that is not to create division. Who is he pointing at as the "stinked"?

    Joe Biden's "GAFFE" of the Day !! September 11th, 2021 #2 - "Stink-Fest" - YouTube
  7. Replies
    9,772
    Views
    513,590

    Re: Latest on the Corona Virus

    Can not agree with you more. The true intent behind this is so twisted and the benevolent masses will never believe the truth.
  8. Replies
    35
    Views
    4,430

    Re: What copier is this in The Matrix?

    Awesome. Thanks for posting this. Absolutely fascinating. Gas lasers can you believe that. Memory was a real limiting factor.
    Out of the gates laser printers was doing 120ppm!
  9. Re: Windows July update breaks printing and scanning when using smart-cards

    Ja dit is n gooie onderwerp. Drukkers en magtiging.


    Пожалуйста, сначала переведите, иначе люди здесь разозлятся.
  10. Replies
    7
    Views
    378

    [Jamming] Re: Konica Minolta 1250 JAM 9201

    The transport rollers at 5mil should still be all good. They can cause trouble after about 12mil but if you follow the PM schedule they should be replaced in good time.

    Had the same code that...
  11. Replies
    17
    Views
    949

    [Misc] Re: Konica Minolta C258 custom paper tray seting

    Sure there are no user authentication setup on the machine with some restrictions?

    Can always try and initialize user settings.
  12. Replies
    11
    Views
    591

    Re: c654 color separation only on thick settings

    Then one way to find out. Put back the previous k drum unit and replace the ITBU.
    As far as i understand the encoder on the K drum is to ensure constant surface speed in relation to the color and...
  13. [Error Code] Re: machine showing wrong installation of DV unit magenta in c224e

    Brett i am not sure. Around 60mA slow blow fuses comes to mind but this fuse is an ICP style surface mount fuse. Been modifying TN512 to work as TN321 as its cheaper and one less stock item to carry....
  14. Replies
    11
    Views
    591

    Re: c654 color separation only on thick settings

    Would be good to understand how the problem is related to the K drum unit.
    If you go to history what P-Codes are listed there?

    Fusing loop sensors could cause something similar? But that would...
  15. Replies
    11
    Views
    591

    Re: c654 color separation only on thick settings

    Costumer not selecting right stock thickness when printing sometimes, crappy toner or bad fuser temp or pressure.

    Glossy stock?

    Separation you mean color registration?

    Any P codes? like...
  16. Replies
    6
    Views
    465

    Re: Who can has modified this...

    You can try to disconnect or disconnect and ground(yes ground) the direction pin on the BLDC motor... Will make it turn in the opposite direction!
    But gear train not designed to run in opposite...
  17. Replies
    6
    Views
    465

    Re: Who can has modified this...

    Striped out the entire toner pump system from a 951 to make toner transfer pump before. Too much of a mess for something that kind of works.
    The air separation will only go so fast.

    Been...
  18. [Error Code] Re: machine showing wrong installation of DV unit magenta in c224e

    Been doing the same. I replace the fuses on the old chips to get it to reset.
  19. Replies
    15
    Views
    531

    Re: bizhub 4050 paper tray empty

    Have been told that even if the rollers looks clean they have some kind of layer build up on them that makes them slip.
    Try rubbing them with some WD-40 or something similar.
  20. Replies
    3
    Views
    275

    [Dead] Re: Dead Bizhub Press C1070

    Follow trouble shooting procedure in the manual called something like "Trouble that does not display service code".
  21. Replies
    7
    Views
    457

    Re: substitute toner for TN-014

    Yea i tape the two bottles ends together with electrical tape and tap it until the toner is transferred.
  22. Replies
    7
    Views
    457

    Re: substitute toner for TN-014

    Used Katun TN414 before. TN710 did the job before as well.

    Not worth decanting all the time.

    TN015 or TN016 cheaper?
  23. Replies
    8,525
    Views
    855,577

    Re: Let the truth be known

    Have to agree with you. They voted for any alternative and the alternative to that is even worse. Its a joke.
  24. Thread: C654e Fs534SD

    by allan
    Replies
    4
    Views
    250

    [Jamming] Re: C654e Fs534SD

    Paper curl issue? Try dropping the fuser temp to see if that helps.
  25. [Error Code] Re: machine showing wrong installation of DV unit magenta in c224e

    Will also happen if you install a K dev chip on a color unit.
    Try to do a system error clear under initialization.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4