Search:

Type: Posts; User: bauer

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Replies
    23
    Views
    4,003

    Re: e-Bridge X Issues

    Are you by any chance updating the printer drivers as well as the firmware?:
  2. Thread: Toshiba 3500C

    by bauer
    Replies
    3
    Views
    629

    Re: Toshiba 3500C

    If you are replacing the developer unit then you use PART # 6LE23638300 or the developer kit that includes the parts to rebuild your current dev unit use PART # 6LE39048000
    6LE23638300
    EPU-FC35-C...
  3. Replies
    4
    Views
    527

    [Error Code] Re: E-230 shows close front cover

    Check the fuses on the power supply board.
    Also the sensors & interlock switch.
  4. Replies
    10
    Views
    830

    Re: Toshiba e_studio 3155 O.S. Upgrades?

    Are you sure that is the correct model #, as BLI has no listing on that model
  5. Replies
    9
    Views
    6,218

    Re: Toshiba sometimes jam w/ e061 jam code

    If the paper in the tray is feeding long ways it is LTR, if it is feeding short ways it is LT.
    Check the paper orientation to coincide with what's in the drawer and what is on the display.
    If they...
  6. Replies
    5
    Views
    656

    Re: Toshiba 2060 blurred line along top

    I'd check the silicon cleaning roller & the upper fuser roller.
    if the cleaning roller is caked with toner, replace it.
  7. Re: Does the HP CM2320 and CM3530 use the same toner?

    He sounds like a brain dead service manager.????????:p
  8. Replies
    2
    Views
    997

    [Error Code] Re: Toshiba DP120f fax machine

    41 The polygon motor in the LSU failed to operate.
    “DEVICE ERROR 41 or 42”
    Check points
    Is the cable firmly connected between the
    LSU and the Mother PBA (CN12), be-
    tween the Mother PBA (CN24)...
  9. Replies
    3
    Views
    1,977

    [Error Code] Re: Toshiba E/S 3511 cea0

    [CEA0] Revolver home position detection abnormality
    Is the revolver home position sensor working properly? May need to be cleaned.
    (Perform the input check: 03-[FAX]ON/[2]/[C])
    NO 1. Check if the...
  10. Replies
    10
    Views
    1,164

    Re: eStudio 352 hangs

    Have you tried a new HDD?
    Check the firmware version on the MFP
    Then install appropriate firmware.
  11. Re: Toshiba RADF MR-3016 - help identifying part

    I don't bother replacing them, all I do is cut the damaged tabs off top to bottom and solves my jam problems
  12. Re: Toshiba es452 jams first copy of the day every morning

    [E3E0] Paper fed from the LCF not reaching the lower drawer feed sensor
    Open the side cover. Is there paper in front of the lower drawer feed sensor?

    Is the lower drawer feed sensor working?...
  13. Replies
    5
    Views
    498

    [Error Code] Re: Toshiba DP8070 Error Code P00 problem

    Are you sure that is the error code as I have no such code in the manual?
  14. Replies
    4
    Views
    807

    Re: Toshiba E 280 Windows 7 Driver

    If you have access to Toshiba's FTP Site the Vista drivers are there and do work with Win 7 (down load and burn to CD )
  15. Thread: Odd Ball Parts

    by bauer
    Replies
    3
    Views
    758

    Re: Odd Ball Parts

    They are available from Toshiba at $ 9.00 CDN each
  16. Thread: Odd Ball Parts

    by bauer
    Replies
    3
    Views
    758

    Re: Odd Ball Parts

    What model & where is it used?
  17. Replies
    7
    Views
    3,285

    Re: toshiba estudio 281c firware update

    If you need a set of jigs, I have a spare set. PM me if you need them
  18. Replies
    8
    Views
    5,466

    Re: How to Activate Toshiba e-Studio 305 Printer?

    The e/s 305 does not require a dongle, print and scan are standard in North America.
    Have you setup the IP address?
  19. Replies
    2
    Views
    502

    Re: C281 - Maintenance required

    The information you are looking for is in the SERVICE HAND BOOK .
  20. Re: Toshiba Estudio 3511 network card not connecting

    The part # is 6LA43082000. also used on e/s 230,280,350,450,3511,4511.
  21. Thread: Cd-10

    by bauer
    Replies
    2
    Views
    1,029

    [Error Code] Re: Cd-10

    CD10 Process related
    service call
    Cleaning brush drive motor abnormality: The cleaning
    brush drive motor does not run normally when the power
    is turned ON or the copying is started.
    Error...
  22. Replies
    200
    Views
    67,921

    Re: Which was the BEST copier ever?

    Toshiba e-STUDIO6530cT
    Status: Current







    Manufacturing Status: New
  23. Replies
    3
    Views
    1,440

    [Error Code] Re: ES 723 with F200 code

    [F200] Data overwrite kit (GP-1060) is taken off
    Clear the service call “F200”. (Key in “0” at 08-633.)
    * When the Data overwrite kit (GP-1060) is taken off from the equipment, the service call...
  24. Re: E-Studio 352 will not print after installing print enabler???

    I'll second that, SSGUY he really should call a qualified Tech
  25. Replies
    1
    Views
    694

    Re: code c 550 after update FW on toshiba e 230

    [C550] RADF I/F error
    (1) Check if the harness connecting the RADF board and SLG board is disconnected or open cir-
    cuited.
    (2) Check if the conductor pattern on the RADF board is short circuited...
Results 1 to 25 of 73
Page 1 of 3 1 2 3