Search:

Type: Posts; User: zoraldinho

Page 1 of 20 1 2 3 4

Search: Search took 0.18 seconds.

  1. Replies
    4
    Views
    743

    [Misc] Re: Canon Ir2270 Plain print out

    Have you tried internal print? If the print is ok then failure is on the scanner.Otherwise, check if the laser shutter opens.Can you see image on the drum?
  2. [Dead] Re: Canon Ir3230 Only Green Light is Blikning

    Can you make a copy?
    Can you access service mode?
    Have you tried turning the brightness button?


    Turn off the main power switch and short out across the 2 contacts [A] of JP1 on the main...
  3. Replies
    10
    Views
    1,272

    [Error Code] Re: imagePRESS C1 - E025-0403 error code !

    Can you share?
  4. Replies
    6
    Views
    589

    [Misc] Re: bad transfer at canon iradv c5235

    You are welcome :confused:
  5. Replies
    6
    Views
    589

    [Misc] Re: bad transfer at canon iradv c5235

    It's standard advance issue.You can inprove quality with user settings:


    Set speed prority to image priority

    Density

    [Cyan]

    -8 to +8; 0*
  6. Replies
    7
    Views
    1,190

    Re: Patrick says Hi...

    Welcome!

    Go Kings!!
  7. Replies
    7
    Views
    1,303

    Re: Hi .. I've just arrived here.

    Welcome Rusty!
  8. Replies
    8
    Views
    804

    Re: Good morning

    Welcome and good luck.
  9. Thread: hello sir

    by zoraldinho
    Replies
    7
    Views
    1,113

    Re: hello sir

    Welcome
  10. Replies
    4
    Views
    693

    Re: Print problem Canon Imagepress c1

    It's looks like black starter out of condition.
  11. Thread: Novato

    by zoraldinho
    Replies
    5
    Views
    821

    Re: Novato

    Welcome
  12. Replies
    7
    Views
    462

    Re: color M570 dead

    By module did you mean memory dimm? This model don't have any..
  13. Replies
    7
    Views
    462

    Re: color M570 dead

    Thanks Lance but printer is clean like a charm.
  14. Replies
    7
    Views
    462

    color M570 dead

    Hi,


    On startup, the hp sign appears and then the black screen.
    Only the orange triangle flashes.
    I hear that the Motor normally performs the initial calibration.
    Can Not get into service...
  15. Replies
    2
    Views
    226

    Re: color M570dn dead

    I posted on Canon forum? It's time for cold beer.
  16. Replies
    2
    Views
    226

    color M570dn dead

    Hi,


    On startup, the hp sign appears and then the black screen.
    Only the orange triangle flashes.
    I hear that the Motor normally performs the initial calibration.
    Can Not get into service...
  17. Replies
    6
    Views
    550

    Re: Introducing an overworked supervisor!

    42968
  18. Replies
    11
    Views
    812

    [CQ] Re: canon c5035 splotches

    This toner will damage fixing rollers over time.
  19. Replies
    11
    Views
    947

    [Jamming] Re: IRC2880 A3 cassette Jamming

    Different model.The same rollers.

    Parts Catalog > Canon > iR4570 > page 30
  20. Replies
    3
    Views
    313

    Re: Black lines on printout of IR4570

    At the end, it can turn out to be bad electronic.:mad:
  21. Replies
    3
    Views
    313

    Re: Black lines on printout of IR4570

    Do you hear clicking during printing?

    You can try to swap the laser.
    Check the drum contacts. A pin can be damaged.
  22. Replies
    3
    Views
    471

    [Jamming] Re: Canon IR ADV C 5235i- JAM 0B00

    Hi, :D






    http://www.copytechnet.com/forums/canon/135914-ir3025-jam-code-0b00.html?135914=#post723629
  23. Thread: km 5050

    by zoraldinho
    Replies
    22
    Views
    2,274

    [Misc] Re: km 5050

    Plain paper? I'm not familiar with this model but most copiers do not allow duplex scanning or printing if selected paper is too thick or too small.
    Have this model option in service mode to check...
  24. Re: Canon Laser Class 720i Send Guide (Universal Send Model)

    It's the same model:


    FAX-L2000 - Support - Download drivers, software and manuals - Canon UK
  25. Replies
    1
    Views
    459

    Re: Hi everyone !

    42770
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4