Search:

Type: Posts; User: Lance15

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    1
    Views
    83

    Re: CLJ 4525 13.20 jam code no paper

    I think if the cover that covers the tray 1 roller isn't installed correctly, it will throw this error. I've had a hard time with it myself, but, finally get it installed correctly.
  2. Replies
    4
    Views
    170

    Re: film fuser Hp M129

    Could be a faulty image drum.

    HP 19A Original LaserJet Imaging Drum - CF219A
  3. Replies
    4
    Views
    232

    Re: About DELL 1760nw

    This model is a re-covered Xerox Phaser 6010. The Xerox service manual doesn't have this code.

    Found this on the Dell Community:
    Solved: DELL C1760NW ERROR CODE 009-654 - Dell Community


    The...
  4. Thread: HP-T520 24"

    by Lance15
    Replies
    3
    Views
    310

    Re: HP-T520 24"

    Well known issue with these printheads. High failure rate.

    711 printhead
    C1Q10A

    I keep at least one in stock at all times.

    But, as blackcat also said. If it sits for a long time, it's...
  5. Re: HP Color LaserJet CM3530 MFP giving "59.F0 Transfer unit is missing or motor erro

    Congratulations!
  6. Re: HP Color LaserJet CM3530 MFP giving "59.F0 Transfer unit is missing or motor erro

    I did some investigation into the solenoid. There's a post here somewhere with close-up pictures of the solenoid and foam pad.

    I notice the same thing on all the ones I've done. Solenoid foam...
  7. Re: HP Color LaserJet CM3530 MFP giving "59.F0 Transfer unit is missing or motor erro

    Yes, the toner cartridges, ITB, paper tray & fuser need to be removed.


    It's expected you know these parts need to be removed

    Good luck.
  8. Re: HP Color LaserJet CM3530 MFP giving "59.F0 Transfer unit is missing or motor erro

    Correct. The alignment of the cams.

    I've read posts here about techs replacing just the solenoid and it's been successful. Other times not. I've never shortcutted this repair. If I'm removing...
  9. Re: HP Color LaserJet CM3530 MFP giving "59.F0 Transfer unit is missing or motor erro

    EVERY main drive assembly I've removed were out of alignment due to the error. EVERY ONE. If it's not aligned, the colors will all be messed up.

    Is it a NEW OEM assembly, third party or...
  10. Re: HP Color LaserJet CM3530 MFP giving "59.F0 Transfer unit is missing or motor erro

    The main drive assembly is probably out of alignment, so, I would remove it and realign per the service manual.

    Use the service manual for the part number for the scanner cover that is yellowed.
  11. Re: HP Color LaserJet CM3530 MFP giving "59.F0 Transfer unit is missing or motor erro

    There are a few shortcuts that I've learned over the many I've replaced. The biggest one is when the service manual is having you to individually remove the LVPS, IDC and formatter cage. All three...
  12. Re: HP Color LaserJet CM3530 MFP giving "59.F0 Transfer unit is missing or motor erro

    I would start here and become familiar with the process:

    ftp://ftp.hp.com/pub/softlib/software10/COL28608/rp-75056-1/HP_Color_LaserJet_CM3530_MFP_Service_Manual.pdf

    When I do this, I still take...
  13. Replies
    4
    Views
    421

    [Jamming] Re: Lexmark T650 w/duplex issues

    On what? A lack of replacing old printers??? HAHAHAHAHAHAHA One of my customers would be screwed if they did audits like that!
  14. Re: HP Laserjet M506DN Intermittent code 55.00.05

    While no 55.00.05, the 55 series points to a faulty DC Controller.


    55.00.yy To continue turn off then on
    DC controller PCA error.
    ● 55.00.01 (event code)
    DC controller memory error.
    ●...
  15. Re: HP Color LaserJet CM3530 MFP giving "59.F0 Transfer unit is missing or motor erro

    The grinding noise could be from any number of things. Fuser, registration assembly, fuser drive assembly, main drive assembly.............

    Depending on who you can find to come out will depend...
  16. Re: HP Color LaserJet CM3530 MFP giving "59.F0 Transfer unit is missing or motor erro

    In my opinion, if a user tried tackling a repair like this and made it worse, I wouldn't even touch the printer. Believe me, printer techs KNOW when someone has been inside of printers to try to fix...
  17. Re: HP Color LaserJet CM3530 MFP giving "59.F0 Transfer unit is missing or motor erro

    Correct. The fuser drive assembly will need to be replaced. It is inexpensive, however, unless you've got printer repair experience under your belt, it's not something a user should do.
  18. Thread: MS821DN

    by Lance15
    Replies
    1
    Views
    285

    Re: MS821DN

    Multi-purpose feeder or Tray 1?

    Here's a good list of 821 parts:
    Lexmark MS821 and MS822 series mono laser printer repair parts
  19. Replies
    6
    Views
    270

    Re: Designjet T1100 MFP

    Got it working.

    After replacing the piston, the guide plate now stays up, but, wasn't the whole problem. By the way, if you need to replace the piston, bring a clamp! I don't know who wrote the...
  20. Re: How to install HP P3005 printer driver on Windows 10 - USB port

    When you right click on the printer in Devices, select Printer Properties.

    Is there a 'Printer Properties' option?

    If not, go here: HP LaserJet P3005 Printer series Software and Driver...
  21. Re: How to install HP P3005 printer driver on Windows 10 - USB port

    Unplug the printer. I'm assuming it's connected via USB?

    Install the UPD using the "USB mode Plug-n-Play" option.

    This option will copy the drivers into the Driver Store and create a...
  22. Replies
    6
    Views
    270

    Re: Designjet T1100 MFP

    Thanks everyone. I just ordered that piston. Will reply back once installed.
  23. Replies
    6
    Views
    270

    Re: Designjet T1100 MFP

    Hmmmmmmm. Not sure.

    I was also thinking that maybe squeezing the clamp shut on both sides might make for a tighter close?

    48324
  24. Replies
    6
    Views
    270

    Designjet T1100 MFP

    Was called to look at this T1100 scanner that isn't pulling paper in to scan. It looks like there isn't enough downward pressure being placed on the guide plate to pull paper in. If I load paper...
  25. Replies
    6
    Views
    326

    Re: HP 4200n not canceling print job

    What was printing? A bunch of gibberish, or, an actual print job?
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4