Search:

Type: Posts; User: GIUBOSS

Page 1 of 15 1 2 3 4

Search: Search took 0.11 seconds.

  1. Replies
    4
    Views
    121

    Re: Drum PCDU UNITS

    you cannot use black pcdu for colors, but you could use some separate parts such as the cylinder
  2. Replies
    11
    Views
    442

    [Misc] Re: MPC 3003 scanner section bend

    not an impossible task but certainly not an easy one. Send us some photos of the damaged part, which, in my opinion, should be dismantled and restored to its original form. I believe only you can...
  3. Thread: C4801 Helpp

    by GIUBOSS
    Replies
    2
    Views
    204

    Re: C4801 Helpp

    Every time you replace one or more boards you have to perform the recovery procedure every time and update the firmware. C 4801 : 1 Reinstall the old PRCB. 2 Back up data. 1. Call the Service Mode to...
  4. Thread: mpc2003 sc144

    by GIUBOSS
    Replies
    3
    Views
    340

    [Error Code] Re: mpc2003 sc144

    I would just like to suggest you take a test with the detached ARDF, once it happened to me that he blew up the bcu because it was short-circuited
  5. Replies
    4
    Views
    480

    Re: IPR C800 cyan light lines

    Developer cyan is probably corrupt , lumps of toner or fluff inside, try filtering it through a sieve, try not to disperse it otherwise I will regret it
  6. Replies
    1
    Views
    246

    [Error Code] Re: Nett.pass.pap error code sharp ar 5127

    better explained, in copier or print mode? However, check if the paper type and size match that of the trays, the bypass tray and the PC / driver settings.
  7. Thread: ricoh sp c250

    by GIUBOSS
    Replies
    4
    Views
    409

    [Error Code] Re: ricoh sp c250

    if dirty with the new cyan toner it could be the transfer or it is the residue of the old toner, however, clean everything by removing all the groups. The sensor is at the bottom you have to remove...
  8. Replies
    6
    Views
    165

    Re: C224e replacing dev unit and roller

    hi, are you a technician? Do you have the service manual? for the developer Execute [Service mode] -> [Image process adjustment] -> [Gradation adjustment]. Replace the MFP board (battery included)
  9. Replies
    17
    Views
    736

    [Misc] Re: Gestetner 2722ztd

    Slim is true, but I meant on those mechanical swicths with copper blades inside placed on the back of the paper drawers and that it is difficult to disassemble to clean them internally from the oxide.
  10. Replies
    3
    Views
    263

    [Error Code] Re: Fuji Xerox DC-IV C5070

    Have you installed the latest firmware? If the HD is good and it works I don't think it's the cable but the control board at this point. First disconnect the memory modules and clean the contacts...
  11. Replies
    17
    Views
    736

    [Misc] Re: Gestetner 2722ztd

    try with a contact cleaner spray it on the switches where it touches the paper size slider.
  12. Thread: IMC2000

    by GIUBOSS
    Replies
    5
    Views
    264

    Re: IMC2000

    YES...standard Mobile Printing Capability Apple AirPrint™, Mopria, Google Cloud Print, NFC, Ricoh Smart Device Connector
  13. Replies
    17
    Views
    736

    [Misc] Re: Gestetner 2722ztd

    Old memories...
    You don't have to reinitialize the machine, try to solve the problem first. Change the paper size by moving the paper size slider to the bottom of the drawer and see if it recognizes...
  14. Replies
    3
    Views
    263

    [Error Code] Re: Fuji Xerox DC-IV C5070

    replace the hard disk, update the firmware.
  15. Replies
    6
    Views
    214

    Re: Mf729cdw horizontal lines

    In my opinion it is the transfer belt cleaning unit to be replaced but I believe it is included in the complete transfer belt unit. You checked the parts counter under maintenance (I changed it long...
  16. Replies
    16
    Views
    906

    Re: Konica Minolta C364e- Blank print outs

    print do you mean copies too?
  17. Replies
    1
    Views
    210

    [Misc] Re: xerox wc 7970i !!! error 345.348.00

    You have already checked for any engine blocks in the fuser, developer, drum sections, if I am not mistaken, the code 345-348 refers to a Driver Main engine block.
  18. Thread: taskalfa 3500i

    by GIUBOSS
    Replies
    11
    Views
    874

    Re: taskalfa 3500i

    The technician's ABC says to check the PM counters of the paper feeds and replace them if necessary.
  19. Re: Ricoh mpc2051:random cut a part of image during a copy of id card

    You're right, I didn't remember well
  20. Replies
    2
    Views
    134

    Re: Konica Minolta c364e - C-D382 error

    Try here. ...
  21. Re: Ricoh mpc2051:random cut a part of image during a copy of id card

    then try in b / w. With the color I think it has protections for banknotes, checks etc. However, carefully clean the scanner
  22. Re: Ricoh mpc2051:random cut a part of image during a copy of id card

    It is to be excluded that does not photocopy the back of the tax code, I always did. I think it is instead the format setting or the wrong position of the second facade. Unless sometimes the...
  23. Replies
    10
    Views
    394

    Re: C224 - Fuser error by printing many pages

    Replace the 3 paper rollers, in the first photo you can see that they are old.
  24. Replies
    3
    Views
    174

    [Error Code] Re: DocuCentre - V 4070

    please let us know if you solved it and how, thanks. Regards
  25. Replies
    3
    Views
    174

    [Error Code] Re: DocuCentre - V 4070

    replace the toner or clogged toner dispenser, auger assembly or transport tube.
Results 1 to 25 of 363
Page 1 of 15 1 2 3 4