Search:

Type: Posts; User: Ragnarsson

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    16
    Views
    644

    Re: Versant 2100 not powering up

    It was broken in one of the upper connection between machine and FWA,
    like someone has forgot to unplug before taking the machine apart.


    Bjorgvin
  2. Replies
    16
    Views
    644

    Re: Versant 2100 not powering up

    - PROMBLEM SOLVED -

    This was broken wire who caused all this.

    Thanks all for your help


    B
  3. Replies
    16
    Views
    644

    Re: Versant 2100 not powering up

    Yes we have measured the 220v and that is OK
  4. Replies
    16
    Views
    644

    Re: Versant 2100 not powering up

    What we have done so far
    - Checked all connectors
    - Swapped the Low voltage supply 1 and 2
    - Checked all the connectors.
    - Checked all fuses that we saw

    Best regards,

    BRR
  5. Replies
    16
    Views
    644

    Re: Versant 2100 not powering up

    Hi,
    thanks for you reply

    Status
    - Display is dead
    - no lights on the ESS board
    - no fans
    - no sign of live unless the small green light next to the display on FWA

    Best regards
  6. Replies
    16
    Views
    644

    Re: Versant 2100 not powering up

    Hi
    thanks a lot, can you explain how that is done?

    Best regards,

    Björgvin
  7. Replies
    16
    Views
    644

    Re: Versant 2100 not powering up

    All plugs connected and tested, every switch checked and rechecked

    Best regards,

    B
  8. Replies
    16
    Views
    644

    Versant 2100 not powering up

    Hi
    I was relocating my Xerox V2100, and now the machine is not powering up.
    The green press status light is on, but the initial display is not turning on.

    Any ideas?

    Björgvin
  9. Replies
    6
    Views
    475

    Re: Sistem Software FreeFlow DC770

    Hi
    I have sent the file, let me know if this works

    Best regards

    Björgvin
  10. Replies
    6
    Views
    475

    Re: Sistem Software FreeFlow DC770

    Ok
    send me your email address, and I will send the file on Monday (i am not at the office now) to you via Dropbox (or similar)

    Best regards,

    Bjorgvin
  11. Replies
    6
    Views
    475

    Re: Sistem Software FreeFlow DC770

    Hi
    I do have FFPS 8.0 sp2 Dc 770 full software image 301E63272, that is FreeFlow 8.0 for Xerox 770.
    But this is useless unless you have valid license

    Best regards,

    Björgvin
  12. Replies
    13
    Views
    947

    [Misc] Re: Versant 80 - image burned on IBT belt

    We did try alcohol, no luck
  13. Replies
    13
    Views
    947

    [Misc] Re: Versant 80 - image burned on IBT belt

    We did look at this though a eye loupe. Crisp text (very small dots)

    and yes, there is no way of the laser doing this
  14. Replies
    13
    Views
    947

    [Misc] Re: Versant 80 - image burned on IBT belt

    Ok
    Some more info:

    1) This text is from earlier job wich was printed on 170 gr. UPM coated paper
    2) All genuine parts and toner
    3) No label has ever gone though this machine

    I have never...
  15. Replies
    13
    Views
    947

    [Misc] Versant 80 - image burned on IBT belt

    Hi,
    I got a strange problem, it seem that somehow a part of text got stuck on the IBT belt and you can't wipe it off. (see image)
    The text is very sharp and it look like it is written by laser....
  16. Replies
    0
    Views
    462

    [Misc] Xerox Freeflow server update manager

    Hi,
    I am trying to update my Xerox Freeflow Print Server with the update manager, and I always get the error:
    "unable to connect to Xerox server. Please check your network settings, DNS and proxy...
  17. Replies
    5
    Views
    1,953

    Re: i have problem in xerox 250 creo cx250

    It seems like you are trying to connect a display or mouse without the pro dongle

    Do this:
    Start up without display and mouse
    Connect to the rip with RDC
    make your adjustments

    Start printing...
  18. Replies
    13
    Views
    4,069

    Re: Xerox Dc250 with Creo CX250 problem

    Hi.

    I dont belive that you need the system disks, I don't have them and I never had them.

    The restriping is only for the image disk (I belive) the system and all the backup info
    is on...
  19. Replies
    13
    Views
    4,069

    Re: Xerox Dc250 with Creo CX250 problem

    Hi,

    Restriping is the correct way, then do a restore.


    Björgvin
  20. Replies
    13
    Views
    4,069

    Re: Xerox Dc250 with Creo CX250 problem

    Hi Viaros.

    I got a PC specialist, he rebuild the Raid controller (this is something quite common with RAID controllers)

    After that I did a full restore, as described in the user manual.
    ...
  21. Replies
    2
    Views
    1,227

    [Electrical] Hi. I know that I can replace the LCD display, I...

    Hi.
    I know that I can replace the LCD display, I was just curious if someone found out what was really wrong with the display.
    (foulty board, some connector or...)

    BR
  22. Replies
    2
    Views
    1,227

    [Electrical] Xerox DC250 blank LCD display on machine

    Hi everyone,

    I have a DC 250 wich sometimes will sometime not start up the UI on the machine ( Large LCD display on the machine), sometimes I need to start the machine up to 3-4 times until it...
  23. Replies
    5
    Views
    658

    Hi, after cleaning the machine inside and out,...

    Hi,
    after cleaning the machine inside and out, and clean contacts ( thanks xcopytech) the machines start working.

    :)

    Regards,
    BRR
  24. Replies
    5
    Views
    658

    I have tried to swap the drums, and replace hot...

    I have tried to swap the drums, and replace hot unit. This came over night, no paper jam or any thing involved.

    Best regards.

    B
  25. Replies
    5
    Views
    658

    DC3535 black streaks all over

    Hi,

    has anyone seen the kind of error in both copy & print
    (see attachment)

    Best regards,

    BRR
Results 1 to 25 of 34
Page 1 of 2 1 2