Search:

Type: Posts; User: OlliK1969

Page 1 of 7 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    3
    Views
    231

    Re: MX 2614 Poor colour quality

    Hi
    I would bet on the 2nd transfer belt. Make a color copy, stop the process and see if everything is fine on the 1st transfer belt. If so, then the 2nd transfer belt is defective or the coupling...
  2. Replies
    22
    Views
    1,246

    Re: MX-5070N very intermittent 3/4 voids

    Hi

    Have you changed the drum unit yet? It looks to me as if the delete bar comes on in between. Had something similar years ago on an MX-M1100
  3. Sharp BP-70C45 no stapling,no punch in print

    Hi

    We have 1 BP-70C45 ( new ) including inner finisher + punch unit

    Problem: everything works when copying, including punching and stapling. Printing also works, the choice of punching +...
  4. BP-70C45 no stapling,no punch in print

    Hi
    Sharp BP-70C45
    Operating system: Apple Mac OS
    The following problem: New device including inner finisher + punch unit.
    Everything works when copying, including punching and stapling. Printing...
  5. Re: Reset administrator password in CommandCenter for FS-1350DN ?

    Hi

    ​isnīt the default password actually 1350 ??
  6. [Jamming] Re: Sharp MX101N - 2nd transfer belt not turning.

    Hi

    L4-04 means Developer Motor trouble BK
  7. Replies
    475
    Views
    38,557

    Re: The War in Ukraine

    2,500 anti-aircraft missiles,
    900 rocket-propelled grenades with 3,000 rounds of ammo,
    100 machine guns,
    15 bunker-launched grenades with 50 rockets.
    100,000 hand grenades,
    2,000 mines,
    5,300...
  8. Replies
    3
    Views
    548

    [Jamming] Re: MX-3051 Jam code P on

    Hi

    is there a paper around the fixing belt ??
  9. Replies
    1
    Views
    640

    MX-C301W with L4-40 trouble

    FYI: L4-40 on an MX-C301W

    Ozone filter fan runs constantly, then goes to error code.

    Troubleshooting:
    Remove rear panel, remove FAX board and PCU-PWB, then remove top fan and ozone filter fan....
  10. Replies
    7
    Views
    438

    Re: AR M160 Registration Sensor ?

    Hi
    If you already have it, there is a broken part in the registration clutch.
    Test it to see if you can turn the registration manually (with the green button in front) and if it really turns.
  11. Thread: Slot Machine

    by OlliK1969
    Replies
    6
    Views
    564

    Re: Slot Machine

    Nice device.
    Have repaired such devices for 10 years, starting with the conversion from “German Mark” to Euro.
    Please check whether your coin validator is self-learning.
    Then you can teach and...
  12. Replies
    5
    Views
    469

    [Error Code] Re: F6-00 on MXC303wW / MXC304W

    Hi
    I had it on an MX-B355.
    Firmware reloaded, had a few weeks of rest, then the error came back.
    Then replaced the circuit board, unfortunately outside of the warranty.
    If it's still under...
  13. Replies
    3
    Views
    354

    Re: MX5070v F2-49

    CPWBX2161DS52 LSU control PWB
    RMOTP1061FCP1 Polygon motor

    Thatīs all
  14. Replies
    475
    Views
    38,557

    Re: The War in Ukraine

    This thread is called " The War in Ukraine" and not which party in the US is better !!
    Neither the current nor the previous President are competent.
    They're just old dumb idiots who talk a lot...
  15. Replies
    4
    Views
    664

    Re: Sharp MXC402SC error code L3-00

    Hi

    L3-00 is scanner return trouble

    Please check the sensors for the scanner. I once had this error on a ship that got into rough seas.
  16. Replies
    7
    Views
    785

    Re: Green glow only on color scan

    Hi

    Have you cleaned the mirrors, lamps and the CCD?
    White balance performed ??
  17. Re: MX-3640N E7-61 error when swapping MFPC board

    Hi

    Can you start a firmware update??
    The error code actually says that there are problems between the boards. Which can also happen with different firmware versions
  18. Thread: U2-74

    by OlliK1969
    Replies
    12
    Views
    2,739

    Re: U2-74

    Hi

    Error U2-74 indicates a problem with firmware recovery and can be reset by the operator by acknowledging (OK) the error display.

    On devices that are not switched off overnight, the device...
  19. Re: MXM7570 / (2 prints, one page doc, stapled)

    Hi

    what is with tray 2,3 and 4 ??
  20. Replies
    0
    Views
    459

    SHARP MX-3060 MFPC-Unit

    Hi

    we are searching for a SHARP MX-3060N MFPC-Unit CPLTM9048DS97 Europe

    best regards
  21. Replies
    0
    Views
    315

    SHARP MX-3060 MFPC-Unit

    Hi

    we are searching for a SHARP MX-3060N MFPC-Unit CPLTM9048DS97 Europe

    best regards
  22. Replies
    5
    Views
    670

    Re: mx6240 black mark

    Yes, transfer belt.

    have had this last week,

    There is dust/dirt under the belt or on the roller

    greetings from germany
  23. Replies
    15
    Views
    1,682

    Re: Old fuser oil roller

    Hi

    is it not the MX-230CR ??
    Itīs available

    Best regards
  24. Replies
    28
    Views
    10,028

    [Error Code] Re: MX4071 PHOENIX II SERIES E7-90 codes

    Hi

    firmware 05.00.Z2 is available
  25. Replies
    2
    Views
    670

    [Error Code] Re: MX2640 and F2-58 error

    Hi

    have had this 2 times, both it was the temp/humidity sensor in the right paper tray
Results 1 to 25 of 170
Page 1 of 7 1 2 3 4