Search:

Type: Posts; User: bruce 49dcs

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    4
    Views
    197

    Re: ecosys 3640mfp

    I told them i had to talk with you guys and I left it running and told them to leave it on and it might work on its own ill be there in the morning and see
  2. Replies
    4
    Views
    197

    ecosys 3640mfp

    customer has 2 of these one had gray back round and streaks i believe the developer unit so i swaped dv units and the streaks and gray went away so i confirmed the dv unit needed replaced
    I...
  3. Replies
    5
    Views
    288

    Re: e-studio 307 hard drive install

    well I went in today and the machine was sitting there ready to go I made copies fine the only thing that changed was the ip address so i fixed that and all is well
    my customer told me about an...
  4. Replies
    5
    Views
    288

    Re: e-studio 307 hard drive install

    I did format the drive using 3c assist mode should i use 4c factory format to completly erase the hard drive then reload the firmware
  5. Replies
    6
    Views
    453

    Re: e-studio 2550c churps like a bird

    turned out to be the TBU all is well thank you for your help
  6. Replies
    5
    Views
    288

    e-studio 307 hard drive install

    got f101-1 formatted hard drive loaded firmware didnt work
    replaced hard drive from a working machine did key backup and restore formatted drive loaded firmware did key backup and recovered key and...
  7. Replies
    7
    Views
    359

    Re: ricoh sp 4510

    thanks ill check it again I ordered a new toner to try also
  8. Replies
    7
    Views
    359

    Re: ricoh sp 4510

    thnks i did look at them and they seemed fine and making contact and the toner was working with the old drum
  9. Replies
    7
    Views
    359

    Re: ricoh sp 4510

    they are oem and the toner was working with the old drum
  10. Replies
    7
    Views
    359

    ricoh sp 4510

    ok im mostly toshiba but my customer got this little ricoh probably from the it guy i dont know
    it called for a pcu drum unit no problem i put in the oem unit and bam it said toner not in correctly...
  11. Replies
    6
    Views
    453

    Re: e-studio 2550c churps like a bird

    thanks guys
  12. Replies
    6
    Views
    453

    e-studio 2550c churps like a bird

    normally i wouldnt ask this but i was an air force crew chief on 1 and 2 engine jets and lost a lot of hearing evryone in the office can hear the churp but me
    i lubed all the exit rollers and shaft...
  13. Replies
    15
    Views
    712

    Re: e-studio 2508a

    I have no idea who this guy talking about firmware is
    I did not ask him or anyone else for firmware
    i have no control over who posts
  14. Replies
    15
    Views
    712

    Re: e-studio 2508a

    thanks for all the input im replacing the machine and when i get the bad one in the shop and fix it ill post what i did
  15. Replies
    15
    Views
    712

    Re: e-studio 2508a

    did you replace the machine for the customer and if so is that one working
  16. Replies
    15
    Views
    712

    e-studio 2508a

    lucky me i sold a 2508 last week and today i was called to fix it the machine wont start no screen energy save is blinking and i have some green lights on the system board and colling fan is on but...
  17. Replies
    5
    Views
    319

    Re: brother 7210 error 05

    ok the customer told me the message said print unable error 05 but ill see if i can print out the list
  18. Replies
    5
    Views
    319

    Re: brother 7210 error 05

    new drum and new toner tn760 mfc-l2710dw
  19. Replies
    5
    Views
    319

    brother 7210 error 05

    anyone know what causes this print unable error 05 brother just says machine needs service
    no jams new drum error comes and goes
  20. Replies
    6
    Views
    327

    Re: kyocera 3500i

    ok but what about the clutch is there one and is it a bear to replace
  21. Replies
    6
    Views
    327

    Re: kyocera 3500i

    the image is shifting to the leading edge but not the same every time and sometimes not at all
  22. Replies
    6
    Views
    327

    kyocera 3500i

    i need to replace the registration clutch and would like to know if its a bear of a job or is it easy the book has nothing on it and im mostly toshiba
    thanks
    bruce
  23. Replies
    4
    Views
    336

    Re: 2550c light copies black

    oops turned out to be a defective toner all is well thanks for the input
  24. Re: Toshiba eStudio 2050 - dead except for 'main power light'

    a few times i had machines not boot start up or give error codes and its been a bad hard drive
    try uploading the firmware
  25. Replies
    4
    Views
    336

    Re: 2550c light copies black

    machine has 26k total 20k black 6k color charger looks fine spiked dv with toner imediatly looks fine gets light a week later
Results 1 to 25 of 97
Page 1 of 4 1 2 3 4