Search:

Type: Posts; User: tecnomarco

Page 1 of 8 1 2 3 4

Search: Search took 0.03 seconds.

  1. Re: Firmware language display RICOH MP C4503/C5503

    Operativo panel, language 0 and language 1 ..D1491490Q same two copier c4503 and C5503
  2. Re: Firmware language display RICOH MP C4503/C5503

    I have two copiers c5503 and c4503 looking at the firmware installed in the administrator section they have the same ... D1491490Q but the c5503 has 5 languages ​​loaded including the Italian one, in...
  3. Re: Firmware language display RICOH MP C4503/C5503

    GIUBOSS ho due fotocopiatrici c5503 e c4503 guardando i firmware installati nella sezione amministratore hanno lo stesso ...D1491490Q ma la c5503 ha 5 lingue caricate tra cui quella italiana ,nella...
  4. Re: Firmware language display RICOH MP C4503/C5503

    can you explain what I can do I tried the 5-009 as you suggested but the languages ​​available are always those two....ma sei italiano se si parliamo italiano
  5. Re: Firmware language display RICOH MP C4503/C5503

    Thank's GIUBOSS my problem is the language is not preloaded....I would need a firmware D1491490Q which contains the Italian language
  6. Re: Firmware language display RICOH MP C4503/C5503

    this is the firmware language "0" and "1" D1491490Q, for both copiers the same firmware but while one has 5 languages ​​preloaded (including Italian) the second only 2 (English and French)
  7. Re: Firmware language display RICOH MP C4503/C5503

    thanks slimslob I wanted to tell you that I have two of these photocopiers on the other the Italian language is there and I solved it immediately ... is it possible somehow to use the firmware of...
  8. Re: Firmware language display RICOH MP C4503/C5503

    have check the language but italian language is not loaded if the language is not loaded what should I do to have the Italian language? i must load the new firmware? thanks
  9. Replies
    0
    Views
    149

    XEROX WC 7120 error 116-321

    I am this copier I cannot reset this error 116-321 I have done the procedure from the keyboard ... try to restart but after 5 seconds it reappears again I am not a xerox technician and I do not know...
  10. Firmware language display RICOH MP C4503/C5503

    hello to all I bought used copiers Ricoh mp c4503 / c5503 I need to change the language on the display (Italian language is required) can someone help me? thank you
  11. Re: Ricoh MPC 4502 and MPC 5503 long time for working

    I tried to change hard disk on mp c4502 but nothing has changed and always very slow to make a photocopy the first copy 40 seconds at the bottom the display says print 1 minute
  12. Ricoh MPC 4502 and MPC 5503 long time for working

    Greetings to all I propose an unresolved problem I have 3-4 copiers the models are RICOH MP C4502 AND RICOH MP C5503 which takes over 30 seconds to make a photocopy same problem for printing ......
  13. RICOH MP C4502 and MP C5503 long time for copy or print

    Greetings to all I propose an unresolved problem I have 3-4 copiers the models are RICOH MP C4502 AND RICOH MP C5503 which takes over 30 seconds to make a photocopy same problem for printing ......
  14. Re: problem with firmware KONICAMINOLTA BIZHUB C360

    I solve this problem with a OLD PEN DRIVE 4 GB a modern pen drive is not good
  15. Re: problem with firmware KONICAMINOLTA BIZHUB C360

    a greeting to all ... I need a firmware not the latest of a konicaminolta c360 in particular I have to change the display language in Italian .... the latest controller firmware I can't install it...
  16. Re: problem with firmware KONICAMINOLTA BIZHUB C360

    thank, for your suggestion but t doesn't work i did as you suggested
  17. Re: problem with firmware KONICAMINOLTA BIZHUB C360

    the second screen is empty, and I also tried to download only the MFC CONTROLLER firmware but it does the same problem
  18. Re: problem with firmware KONICAMINOLTA BIZHUB C360

    I tried to reformat the 4 GB key the copier tries to update the firmware but after a minute the word DOWLOAD N.G. reappears.
  19. Re: problem with firmware KONICAMINOLTA BIZHUB C360

    can someone give me a firmware previous to this or suggest a solution thanks
  20. Re: problem with firmware KONICAMINOLTA BIZHUB C360

    thank Phil.. i have bought this copier but language italy is missing, this is the firmware A0EDFW , via rear USB port but SCANNER IS OK ...ADF IS OK..ECC... MFC CONTROLLER ....DOWNLOAD N.G.
  21. problem with firmware KONICAMINOLTA BIZHUB C360

    I was updating the firmware of the konicaminolta c-360 while the controller update was in progress and the writing "dowload n.g." appeared and the "red" print button remained while all the other...
  22. Re: Ricoh mp c5503 , 1 minute for print or copy

    Thank you for the suggestions, the paper used is the normal one, the problem is the same both in copying and in printing or with photocopier in READY state, starting copying or printing writes...
  23. Re: Ricoh mp c5503 , 1 minute for print or copy

    I must also say that when the press starts even if there are 500 copies, it prints them all at a speed of 55 cpm without interruption
  24. Re: Ricoh mp c5503 , 1 minute for print or copy

    the prints are perfect, when launching printing it runs for 20-30 seconds ... printing or photocopying ... on the display it writes ... print 1 minute
    but all of a sudden !!!
  25. Re: Ricoh mp c5503 , 1 minute for print or copy

    could it be the melting unit? I have to check !! .. but in the last few months it worked well now it has given this problem .. the drivers are the PCL6 and it is not set on the WSD port
Results 1 to 25 of 178
Page 1 of 8 1 2 3 4