Search:

Type: Posts; User: fshead

Page 1 of 20 1 2 3 4

Search: Search took 0.06 seconds; generated 7 minute(s) ago.

  1. Replies
    21
    Views
    590

    Re: Mpc4502 no toner magenta

    ITS fshead......
    2nd you are only a taker no rep and i feel not much of a tech...
    You never thank anyone nor answer "The basic questions".
    Just let us guess like the random end user that "TAKE...
  2. Replies
    21
    Views
    590

    Re: Mpc4502 no toner magenta

    maybe get a tech who does more than fusers
  3. Re: swapping out a M5118 Kyocera TASKalfa 3500i FUSER UNIT

    thanks
    is the black cover near the screws?
    Are these pretty solid machines?
    The only kyoceras i did in the past were some 40cpm printers .
  4. swapping out a M5118 Kyocera TASKalfa 3500i FUSER UNIT

    HI
    I normally only do ricohs but a good accnt asked me to pop in a fuser unit and "main charge unit too".
    I had time to look at it but didnt change it as it was still working wth scuffed fuser...
  5. [CQ] Re: Ricoh Aficio 2075SP ~ Printing Unwanted data on Word files & Config Page

    When I use to resell laptops and had memory stick issues I would clean the contacts with
    a pencil erasure and the alcohol..............
  6. Replies
    4
    Views
    845

    Re: Ricoh MP C2551 toner

    MPC2550 WILL FIT AND be read by RFID but you need to break a small tab off as i remember..
    I think he was asking mpc2551 toner powder in a mpc2500...
  7. Re: ANY ADJUSTMENT for scanning density mpc3501?

    i use alcohol all the time and havent tried rain x yet..
    I can only imagine what ones lungs must look like working in these places for 30 years.............
  8. Re: ANY ADJUSTMENT for scanning density mpc3501?

    thanks
    i thought auto cal in user was just for getting the colors right but i will always take advice from you.
    And does it not seem weird that copy mode shows no effect?
  9. ANY ADJUSTMENT for scanning density mpc3501?

    hi
    i did a service call on a mpc3501 that is in a machine shop wth lots of oil and muck that was dirty and a bit of an oily film in optics.
    Cleaned optics,interior and need to swap out the transfer...
  10. Replies
    21
    Views
    590

    Re: Mpc4502 no toner magenta

    OK
    THAT SOUNDS RIGHT.....................
    and from what i am led to believe these chips use RADIO freq to be read..........
    Well at least you answered all the questions brought up from other techs
  11. Replies
    4
    Views
    845

    Re: Ricoh MP C2551 toner

    I VE been informed it does but would go slowly and test a bit first..........
  12. Thread: Spc431 fuser

    by fshead
    Replies
    5
    Views
    188

    Re: Spc431 fuser

    SRRY DIDNT see SANDYS REPLY............
  13. Thread: Spc431 fuser

    by fshead
    Replies
    5
    Views
    188

    Re: Spc431 fuser

    yes
    i do it all the time.............
    swap connector with 3 jumpers and plastic guide on the side...
    I tried to gut a few connector to make jumpers but they are very small pins...
    I have a bulk...
  14. Replies
    21
    Views
    590

    Re: Mpc4502 no toner magenta

    >>any ideas? Maybe bad developer unit because toner pump wasn’t working?
    might as well swap out all drums,devELOPER units,ITB unit and fuser and hope you hit paydirt.......
  15. Replies
    21
    Views
    590

    Re: Mpc4502 no toner magenta

    is it called a tube or a hose???????????
    I pull them out and the spring loaded piece and shoot air outside and as long as they are not torn or hard resuse them.,
    I hate swapping the danm yellow one...
  16. Replies
    21
    Views
    590

    Re: Mpc4502 no toner magenta

    OEM TONER?
    is the bottle empty???????
    Is unit overtoned?????????????
    did you ck the waste unit and is it top heavy wth magenta?
  17. Replies
    19
    Views
    1,626

    Re: SSD vs HDD in copiers

    I ve put SSD in my older laptops and they fly now..vista and win 8.
    AS i been led to believe there are no moving parts on a SSD..
    So why would it degrade?
  18. Replies
    13
    Views
    579

    Re: ricoh mpc2800 with sc 533

    WHY waste the paper..
    I recently ad a nice mp6002 wth low meter shipped up from down south.
    They warehouse barely wrapped it in plastic and the front door and all trays banged open
    and close for...
  19. Replies
    13
    Views
    579

    Re: ricoh mpc2800 with sc 533

    i meant to say fan was to the right of the right door and left of the controller..
    Its odd they bent the metal brackets,fan but all outside plastic was in one piece and perfect..X MEN ??
  20. Replies
    4
    Views
    191

    [Misc] Re: Toner Ricoh Pro 8100 to use in Pro 8200

    I would try it and just do it on one machine and keep meters/dates and maybe run a few sample prints both b4 and a month later...
    I would also check what fusing temp both run at.
    Same dev and same...
  21. Replies
    13
    Views
    579

    Re: ricoh mpc2800 with sc 533

    FAN WAS to the left of the right side door..........
  22. Replies
    13
    Views
    579

    Re: ricoh mpc2800 with sc 533

    danm truckers moving electronics like it is lumber...............
  23. Replies
    886
    Views
    186,835

    Re: Which copier was the biggest piece of crap ever?

    I started wth the hp 1 back in the 80s and stopped after the 4300 series..saw so many bad laser unit calls and refused to resell any HPs
  24. Replies
    886
    Views
    186,835

    Re: Which copier was the biggest piece of crap ever?

    jumped the gun

    as i was saying
    It is so odd as I started looking at the mpc305 s to buy from my lease return supplier and asked my local dealer who i buy parts from and
    the shop guy who fixes...
  25. Replies
    886
    Views
    186,835

    Re: Which copier was the biggest piece of crap ever?

    It is so odd as I started looking at the mpc305 s to buy from my lease return supplier and asked my local dealer who i buy parts from.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4