Search:

Type: Posts; User: copyman

Page 1 of 20 1 2 3 4

Search: Search took 0.12 seconds.

  1. Re: Bizhub 423 - Selected HDD 'Not Installed' - Can't Select 'Installed' again.

    I read the original post quickly and thought it showed HDD installed. The last poster is correct and if HDD "not installed" format HDD tab will not show under state confirmation in service mode....
  2. Re: Bizhub 423 - Selected HDD 'Not Installed' - Can't Select 'Installed' again.

    try formatting with the quicker "logical" format. If that don't work do the "physical" format which can take several hours.
  3. Replies
    6
    Views
    307

    Re: Russian Escort Service in Janakpuri

    "want us to close forum" Didn't know you were an Admin here? I only know of one admin, Aneurysm.

    First it was a joke, second a lot worse has not closed this forum, like all the bandwidth wasted on...
  4. Replies
    5
    Views
    708

    Re: 284,364e firmware

    Search this forum about your issue. There were some recent posts regarding the 4 series batteries & TPM chip message.

    Also there will be a better chance of someone sending you firmware if you make...
  5. Replies
    7
    Views
    404

    [Misc] Re: Konica Minolta C654e freezing display

    So machine will go to the firmware screen when turning on with USB in service port? It will update the firmware correctly with no issues? Have you tried the reset firmware A145FW
  6. Re: KM BizHub 423 - Paper Jams - Tray 1 Only - Error 30-01

    See attached. You earned it...
  7. Re: KM BizHub 423 Refurbishing - What to inspect/clean/lubricate/replace ?

    Ha-ha, figured the C253 would be a step up from the 423 he is working on.....just a small step up:D
  8. Replies
    9
    Views
    606

    Re: C250i fusing problem

    Not sure for this model but there is firmware for the 8 series addressing this issue mostly for 1st page after coming out of sleep mode.

    Have you gone into the service mode and increased the...
  9. Re: KM BizHub 423 - Paper Jams - Tray 1 Only - Error 30-01

    You posted the display shows 'Paper Size/Incorrect Type' after the jam. You have to address this issue. If registration clutch slips and feeds next sheet without hesitation machine will think it's...
  10. Re: KM BizHub 423 Refurbishing - What to inspect/clean/lubricate/replace ?

    Good to hear Fritzy. Thanks for the update.

    Soon you will qualify to being a trained & certified CTN Technician.......

    To complete certification next course is on an old color model, the...
  11. Replies
    6
    Views
    307

    Re: Russian Escort Service in Janakpuri

    Nude pictures please....:D
  12. Re: Newbie Here, where can I find paid training sessions?

    It's hard enough to get training for the smaller segment models but production models would be impossible unless an authorized dealer. And even at that K/M would not allow a newbie to attend...
  13. Re: Guidance c454e toner smudge....transfer roller?

    You can use a less expensive "genuine" black developer unit and change it to color. Search this forum on very easy procedure. But once again before doing this you have to correct the over life / bad...
  14. Re: Guidance c454e toner smudge....transfer roller?

    +1 on Cyan developer problem. No way it's a transfer roller problem. You may see cyan build up on the transfer roller but not the problem.

    Very common for 4 series dumping developer, usually cyan....
  15. Replies
    3
    Views
    161

    Re: C224 Looking for firmware update.

    PM me your email and will send what I have.
  16. Replies
    3
    Views
    161

    Re: C224 Looking for firmware update.

    There is a bulletin on procedure to update to version 7. This will make 4 series NON-E into an "E" machine
  17. Re: Seeing colored lines in Demo Page BizHub C220

    Sorry to disagree. I've never had to change background settings on all the konica minolta models I've worked on. And the issue here is definitely not the developers.
  18. Re: Konica c368 function will not work scanner unavailable

    You posted "it's possible I might have changed the setting". Don't think there is anything in admin or serv modes that would isolate scanner, except "isolation set" in service mode.

    Anyway go into...
  19. Re: C224e scan to mail using Gmail doesn't work anymore - firmware ?

    There is bulletin and new Firmware that will allow scan to gmail. If you are contributor someone will send it to you.
  20. Re: Seeing colored lines in Demo Page BizHub C220

    Yes the C220 series drums have the white flags for corona cleaner same as the 4 series. Drum units are almost identical but can't be interchanged.

    Worth a try but doubt it will help in this case.
  21. Re: Seeing colored lines in Demo Page BizHub C220

    The after market drums you are getting"might" be fine but you should also get the corona grid & saw tooth charger for each drum unit or you may still have quality issues. Especially with also using...
  22. Replies
    1
    Views
    140

    Kyocera KM-5035 - SRDF-2

    Don't know Kyocera that well but would like to take care of new customer and maybe upgrade this old model in near future. From the pics they sent me it appears that 3 orange / red rollers in the...
  23. Replies
    0
    Views
    101

    Kyocera KM-5035 - SRDF-2

    Sorry deleted- posted in wrong forums. If you might be able to help please see post in Kyocera forum.

    thanks
  24. Replies
    11
    Views
    362

    Re: Strange streaks coming on paper

    QUOTE: The distance between marks varies.
    Author, why you're doing tests SEF and from bypass?

    I saw the defects on sample weren't perfectly spaced apart and posted my opinion on what was...
  25. Replies
    11
    Views
    362

    Re: Strange streaks coming on paper

    Would be nice if K/M had a defect ruler like HP and some other OEM's have.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4