Search:

Type: Posts; User: copyman

Page 1 of 20 1 2 3 4

Search: Search took 0.35 seconds; generated 47 minute(s) ago.

  1. [Misc] Re: what chemicals are you using to clean one ways on KM units

    I seem to recall canon machine saying refurbished in Mex or something like that. And think I remember how nice and new they looked but didn't last long.

    Back in the day you could send covers away...
  2. [Misc] Re: what chemicals are you using to clean one ways on KM units

    Haha we are lucky to still be alive! Heck in the 60's we rode our bikes in the fog behind the DDT trucks that drove around the neighborhoods fogging for mosquitoes! Way before EPA was around.
  3. [Misc] Re: what chemicals are you using to clean one ways on KM units

    Good advice but have to disagree about "not" scuffing the shaft. Scuffing up the shaft with "scotch brite" pad only was even recommended to us by Kon/Min factory rep. Like the other poster said make...
  4. [Misc] Re: what chemicals are you using to clean one ways on KM units

    Speaking of chemicals, us old time techs were exposed to so many chemicals 30-40 years ago. A few I remember is Sharp Pikle drum polish to polish Cadium drums which in itself is deadly and also a...
  5. Replies
    28
    Views
    1,981

    Re: Removing politics from this forum

    Myself and many more members here are right behind you. Like I said before unfortunately this forum will become totally a polictical forum with 4 or 5 people replying to 3 or 4 same old hate Trump...
  6. Replies
    4
    Views
    183

    Re: Platt Tool Case Pallets - Opinions?

    I'm with you and still carry the old style "briefcase" toolbag. Most of the techs I know have switched to the soft shoulder style tool bags. They laugh at me when they see I still use old style. But...
  7. [Misc] Re: what chemicals are you using to clean one ways on KM units

    We just use alcohol to clean oneways and scuff up the shaft with a scotch brite pad. lately I've just been replacing them when I replace the rollers but many of my fellow techs just clean them.
    ...
  8. Replies
    8
    Views
    267

    Re: Replacing the 4 series MFPB and PRCB

    I believe the total counters & serial numbers are kept several different places on K/M copiers, MFB, SSD,Control panel pwb and maybe one more place. Think Blackcat posted this as well.

    Like I...
  9. Replies
    8
    Views
    267

    Re: Replacing the 4 series MFPB and PRCB

    Of course they want to sell you a new board. You can swap one board at a time for troubleshooting purposes and I have also swap the MFP board and left in machine but always used the SSD from the...
  10. Replies
    12
    Views
    709

    Re: One of the first Sharp fax brochures?

    Ouch! Showing our age! LOL
  11. Thread: C300i

    by copyman
    Replies
    6
    Views
    257

    [Error Code] Re: C300i

    [QUOTE=EarthKmTech;1400088]Number 1

    with the 0002 error - i have seen this when assemblers pushed the optional tray(s)/LCT multi pin connector in on an angle and bent one of the pins in the...
  12. Replies
    12
    Views
    709

    Re: One of the first Sharp fax brochures?

    Was selerex a parts company or am I thinking of sel-drum?
  13. Re: Biz Hub C224e with DF701- scan glass assy jam?

    Had a call today with a DF701 and the black mylar was really bad. Confirmed the original doesn't even touch it and it's there to mask the exposure lamp and outside light. The original is fed directly...
  14. Replies
    15
    Views
    504

    Re: Cant scan to email. TX Errors bizhub C224

    I've been in touch with the original poster and after sending him F/W, bulletins, etc I told him his only options may be SMB or the dreaded FTP scanning. He decided to go with SMB and it's working...
  15. Re: Biz Hub C224e with DF701- scan glass assy jam?

    Wanted to add I've seen that black mylar really bad on machines with 1 mil plus meters. You would think it would cause problems but never did. Don't think the originals even touch black mylar that...
  16. Re: Help. Konica Minolta Bizhub C759 double/ghost prints on 11x17 only.

    Sorry don't know that model but with my Kon/Min experience just a few things come to mind.

    When you are saying the IU's, Drum and fuser are new why would you have had to replace them with only 86K...
  17. Replies
    12
    Views
    709

    Re: One of the first Sharp fax brochures?

    Good point but sure looks like more than 5% coverage to me?

    Come to think of it I may have made a mistake calling it a brochure.
  18. Replies
    12
    Views
    709

    One of the first Sharp fax brochures?

    See attached. I came across this in my old files and found it to be really funny. I believe this is for one of the first fax machines made (1972). Not sure if this was the one where a drum rotated...
  19. Re: Biz Hub C224e with DF701- scan glass assy jam?

    That is normal. Never had it cause a problem. More of a problem with the mylar guides in paper path tearing and causing issues.
  20. Replies
    1
    Views
    87

    Re: Imageclass D320

    Did you see if Hytec dealer services in FL repairs them?
  21. Replies
    9
    Views
    501

    Re: Biz i series troubleshooting guide

    Ribbed P/U: A64J564201

    New style Feed: A64J564101

    New style Sep: AA2J560000
  22. Replies
    4
    Views
    164

    Re: Selling a business???

    Hey Oyster, haven't seen you around on this forum for awhile. Hope all is well.

    I recall this being discussed on this forum before but no harm in posting a new thread. I was thinking the same...
  23. Replies
    9
    Views
    501

    Re: Biz i series troubleshooting guide

    The 5636 rollers wear faster when used as feed and sep. Doesn't matter with pick up because not rubbing against another roller. And like I posted I have been using the ribbed for P/U instead of the...
  24. Replies
    4
    Views
    998

    [Misc] Re: Konica Minolta Bizhub C550 firmware

    Make a small donation to this website and someone will send it.
  25. Re: Hi i need xerox active generation code for color machine

    Here is the link to the post I was talking about. The person included their email. If what he posted isn't what you need, maybe you could email and ask if they could help since Xerox related.
    ...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4