Search:

Type: Posts; User: lees

Page 1 of 3 1 2 3

Search: Search took 0.01 seconds.

  1. Re: p6130 cyan toner keeps getting stuck in machine

    I had to replace one to these a while back I think it was on the cyan toner. I was able to pull the #513 away from the metal frame enough to get the old one out by just removing the top cover. I...
  2. Replies
    6
    Views
    382

    Re: M 2040dn making strange noise

    All the noise problems we have seen with these machines has been the fuser or the fuser drive.
  3. Replies
    3
    Views
    594

    Re: M2540 noise after fuser replacement

    We had one of these that we had to replace the fuser drive unit. Instead of the fuser making the noise, it was in the drive unit. To my knowledge the problem never came back.
  4. Replies
    14
    Views
    1,151

    Re: Facetime/ Messenger-Video with Customers

    We have used face time several times with customers to help with different problems. We can even facetime with other techs in the field to help them out. We also have customers send different...
  5. Replies
    16
    Views
    1,264

    Re: M3655idn print/copy hesitation issue

    Make sure the spring is on the feed holder assembly. We have seen this spring missing or out of place and cause this issue. The machine tries to pick up paper but sometimes it has to try several...
  6. Replies
    7
    Views
    853

    Re: Kyocera Mystery Part (TASKalfa 3551ci)

    That is the cover over the wires on the attachment kit for the DF-770. It just snaps over the wires to hide them. It is not necessary for proper function and many of them have fallen off and are...
  7. Thread: Error code: 0150

    by lees
    Replies
    6
    Views
    1,600

    Re: Error code: 0150

    Using generic toner will sometimes cause this issue. Also if the chip on an OEM cartridge is bad, it can cause the issue. Install a new OEM toner cartridge and the issue will probably go away. We...
  8. Thread: Taskalfa 6002i

    by lees
    Replies
    6
    Views
    596

    [Error Code] Re: Taskalfa 6002i

    Use a genuine Kyocera toner cartridge in it. Many generic toners will cause this error. If you are using a genuine cartridge, try another one.
  9. [CQ] Re: TA 4551 Reprint 1st thing in the morning Color & B/W

    Here is another option to try. In the system menu, you can change the fuser temp for each type of paper. Go to system menu>common settings>paper settings>media type settings and select the type...
  10. Re: M3540idn part identification (tray size sensor)

    Here is a part number we have for the FS2100 which is the printer this MFP is based on. It should be the same even though it is a strange number.
    5FSP03090001+01 cassette size switch
  11. Replies
    5
    Views
    1,428

    Re: kyocera P6130/M6535

    Take a look at this QA. 2NR-0049 (I175)
  12. Replies
    13
    Views
    2,274

    Re: web admin kyocera p6035cdn

    Here is something that we have used on some models that has worked several times for us. Menu>User/Job Account. Login using the default Admin Password. Select Login>Local User List>Admin>Password...
  13. [CQ] Re: Kyocera-Mita-cs6002i prints only blank pages after new MK installed

    According to what I see, it takes a MK-6325.
  14. Replies
    2
    Views
    1,422

    [CQ] Re: 2 Epson WF-C20590 different ink consumption

    One thing we have found to increase the ink yields is to change a setting in the driver if they are printing mostly text. This will only affect the print side. It will also show up with light areas...
  15. Replies
    7
    Views
    1,412

    Re: Original size detect

    Check the sensor on the white reference strip of the document processor. You can check it in maintenance mode 31 or 32. I have had the sensor come out of place and I have seen the actuator on the...
  16. Replies
    4
    Views
    748

    Re: 306ci adf dog earing original

    Take a look at bulletin H068. This may help with the issue. We have seen this a few times.
  17. Replies
    3
    Views
    539

    Re: DP-770 on CS2551ci Unresponsive

    I have seen this on a couple of machines where nothing seems to work. There is a sensor that is actuated by the reading guide (the white strip on the DP that sits over the slit glass when the feeder...
  18. Replies
    8
    Views
    1,634

    Re: 5551ci - Error Occurred at Cassette

    I had this same issue on a 8002i that turned out to be the engine board. I was not able to clear the error at all. It always said there was an error in cassette 1. If you left cassette 1 out and...
  19. Replies
    1
    Views
    836

    [Jamming] 8002i with 0360 error and registration jam

    I had two of these machines the other day that had similar issues. One had a constant jam that would not clear. Had the tech go into maintenance mode 31 and found the registration sensor was...
  20. Replies
    7
    Views
    985

    [CQ] Re: fs4200 and P3060DN image problem

    Replace the developer clutch.
  21. Replies
    9
    Views
    1,005

    Re: Copystar CS 2552CI /ADF ISSUE

    I have had a similar issue with a small MFP where the feed roller would not turn. It turned out to be the sensor that is on the reading guide. It tells the machine that the DP is completely down...
  22. Replies
    11
    Views
    2,439

    Re: Kyocera M3550idn Receives faxes slow

    Make sure you are using a two wire patch cable to the machine. Using a 4 wire can cause all sorts of weird issues. I had one that would not receive from certain locations, but worked fine from...
  23. Replies
    6
    Views
    4,350

    [Error Code] Re: Ecosys M6535cidn C4600 code

    We have faced this issue countless times. The problem we found with this is that when the cleaners try to move up onto the glass on the laser unit, they are all four trying to do this at the same...
  24. Replies
    7
    Views
    14,913

    [Error Code] Re: Kyocera P6035cdn error C4600

    We have modified several of this series machines with some success. We have found that the cleaning motor will need to be replaced and possibly the left connect board to eliminate the error code. ...
  25. Replies
    3
    Views
    5,254

    Re: mita fs-c5150 error code F46F

    Well for some reason my former post did not allow me to paste the information in even though it appeared that it would. Here is the information from the bulletin.

    An error is detected at the...
Results 1 to 25 of 69
Page 1 of 3 1 2 3