Search:

Type: Posts; User: GIUBOSS

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    4
    Views
    206

    Re: ricoh mpc 3501 jam

    jam code? sc582, why do you change the fuser with the machine blocked by jam? reinstall the old fuser and clear the jam first
  2. Replies
    3
    Views
    109

    Re: Oki C531 printer

    I wouldn't want to be trivial even though I haven't repaired a lot of OKI's but have you tried putting the old toner back?
  3. Replies
    12
    Views
    473

    [Misc] Re: Ricoh locked print read error ERR:

    Have you tried to print with different PCs connected to the Ricoh printer (model ??) Follow Copier tech's advice regarding the ip address and fw update. Have you installed the pcl6 driver? Keep in...
  4. Replies
    3
    Views
    223

    Re: konica minolta bizhub 226 memory clear

    What do you mean by memory, factory reset or personal settings? Unlikely cause, to be scrupulous check the switch that has no burns etc otherwise it could be a malfunction of the buffer battery or...
  5. Replies
    2
    Views
    207

    Re: Ricoh DD 3334 duplicator master problems

    to solve the problem try to gently clean the surface of the basket with a cloth soaked in water and degreaser or by spraying directly on it avoiding the ends. Also, you also need to spin the drum to...
  6. Replies
    10
    Views
    646

    [Jamming] Re: Ricoh MPC6503 (Charis) - Jam code 025

    sometimes with haste or with little attention this also happens ... thanks for updating us.
  7. Replies
    7
    Views
    383

    Re: Ricoh Aficio 1035 SC542 Error code

    [QUOTE=Kosta25;1817472][COLOR=#333333]AX43 0064 - This lamp is broken. Hard to find...

    I could look for it among my old things
  8. Replies
    1
    Views
    145

    Re: Epson wf-c 5790 error code 100016

    hi, possibly write in English here '. If the product was purchased before January 2021 it is necessary to update the firmware.
  9. Re: RICOH MP9002, Duplex inverter motor 5804 does not move.

    if you have already done a test with another duplex, I think it works, and that does not solve the problem, you should move the aim to other parts of the machine. Is the machine perfect for normal...
  10. Replies
    2
    Views
    166

    Re: Ricohh DD 3334 Duplicator master problems

    hello, you should post duplicators in the appropriate section of the forum. So uniform inking of the drum makes the matrix stick well to it. You have to make sure that the ink is distributed...
  11. Re: RICOH MP9002, Duplex inverter motor 5804 does not move.

    just to be picky, did you check inside the machine if there were any paper scraps in the duplex connectors?
  12. Replies
    7
    Views
    383

    Re: Ricoh Aficio 1035 SC542 Error code

    i found this:




    AX43 0064
    Heater - 230V 550W 335mm
  13. Replies
    1
    Views
    165

    Re: Xerox wc7556 job processing indefinitely

    you have installed the official driver and with a fixed ip address, try to print from a single pc connected directly to the network or usb to rule out that it is a network problem.
  14. Replies
    15
    Views
    681

    Re: MP C3002 No Toner(Bk) message

    check all gears of the developer unit, and inside the machine if it has leaked. I recommend replacing the developer and reviewing the pcu section. First check, doing the forced loading of the...
  15. [Jamming] Re: SPDF D683 on MPC5503 J001 Jam at P after detecting blank page

    have you performed a complete maintenance of the ardf, cleaning all optical sensors?? New rubber rollers?
  16. Replies
    4
    Views
    252

    Re: Ricoh MP2352 Twain driver

    are you sure that stordoc also doesn't work at 32bit?
  17. [Misc] Re: Problem when print front and rear in A3 paper

    check the belt
  18. Replies
    1
    Views
    209

    Re: Ricoh sp4510dn service manual

    write me with PM
  19. [Misc] Re: Problem when print front and rear in A3 paper

    where exactly do you find it jammed? Have you tried putting the A3 in another input tray? Are rubber rollers new?
  20. Replies
    4
    Views
    251

    Re: Canon IR500i not printing or copying

    update all firmware
  21. Replies
    4
    Views
    251

    Re: Canon IR500i not printing or copying

    have you tried an internal test of the machine?
  22. Replies
    3
    Views
    199

    Re: Ricoh MPC2051 english language

    write me in private
  23. Re: Konica bizhub 601 - Incorrect Paper Tray Size

    as with other brands, this type of problem is due to the paper size sensors or dirty, out of place or oxidized switches usually mounted on the machine body at the bottom where the drawers slide.
  24. Replies
    2
    Views
    310

    Re: HP M553 Fuser reset option not showing up

    If the procedure is correct, you probably have a software problem, try to reset and update the firmware. Have you tried on the web page?
  25. Replies
    5
    Views
    277

    [Error Code] Re: Pro C5100 - SC401-01

    Genuine drum? Old developer? Did you clean the surface of the developer roller? Try cleaning the ID sensor and then running the manual process check.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4