Search:

Type: Posts; User: Woxner

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Re: Black lines ONLY on Color prints C368. FIXED but still curious about symptoms.

    cl the idc sensors and run reset reinialize in stablizer then gradation then stableizer. i see your colors are out of alignment. this fixed it for me. how much on drum units? start simple.
  2. Replies
    5
    Views
    324

    Re: Kon/Min Firmware

    I was told at school is has the prev as well not just the fix
  3. Re: B758 Jamming 9201/9202/9203/3201 Double sides

    repl the reverse unit past the fuser. bearing slips
  4. Replies
    4
    Views
    239

    Re: i Range usb export not working

    This sounds silly but did you scroll up on the screen to enter password. These like the 3.1 flash jet drives.
  5. Replies
    14
    Views
    1,842

    Re: Konica Plotters?

    Km does not sell kip anymore. We use HP. Most kips are pretty good if in right place. I had some in or close to welding shops. They turned out to be a pain in the ass. Coronas were always a problem...
  6. Replies
    24
    Views
    1,327

    Re: I-Series storage board & boot problem.

    There is a way to format these storage boards. You need a code.
  7. Replies
    13
    Views
    1,346

    Re: Bizhub 368e smearing

    There is firmware for this issue. You also have to change a dip switch as well. Problem only happens after it sits.
  8. Replies
    5
    Views
    413

    Re: DR314K vs DR313K

    The 8 series will fit the 8e with no mech problem. It will however not last as long. Maybe 50 to 70% life. The 8e does not work in 8 series
  9. Thread: cE301 on C250i

    by Woxner
    Replies
    19
    Views
    1,026

    [Error Code] Re: cE301 on C250i

    if you can turn off market place this causes problems, soft sw 172 set to 01 also turn off in admin mode. i had this problem on a c360i. i did manage to get 45 to work. had to just let machine sit...
  10. Re: Konica 1250 toner piles on charging unit sides after 5000 copies

    perhaps the transfer belt is not transfering all the toner also replace transfer belt rollers. 951 does same thing.
  11. Replies
    4
    Views
    272

    Re: c364e firmware upgrade

    Open the folder and transfer all the files in the folder to the root. Nothing else on the usb.
  12. Replies
    9
    Views
    622

    Re: BH650i half black copies

    Ck for 8 series bulletin on this simular problem
  13. Thread: kmbs 658e

    by Woxner
    Replies
    2
    Views
    271

    [Error Code] Re: kmbs 658e

    update firmware and replace home sw for scanner
  14. [Misc] Re: I series stopping at 25% of the boot process

    its B6 now or 6B. there is a procerdure to reset the storage bd reqiures a code and you need to run the 8 series tool. it will wipe all meters. to tewst if its this bd take it out and see if you can...
  15. Replies
    10
    Views
    1,104

    Re: i series reset tools

    and the 8 series reset tool is used for i series as well
  16. Replies
    10
    Views
    1,104

    Re: i series reset tools

    one way to test storage board is to remove it and see if it will load firmware. it wont load controller though
  17. Thread: i series

    by Woxner
    Replies
    10
    Views
    1,663

    Re: i series

    for marketplace to be totally off set soft sw 172 to hex 01
  18. Replies
    9
    Views
    707

    Re: KM c654e Scan Issue

    run the adf chart for mag size and skew. i had one two days ago that only did this on email scans. copies were fine
  19. Replies
    6
    Views
    532

    [Dead] Re: Konica 458E wont turn on

    repl mfp and possible eemcb. had this many times
  20. Re: Brand New Bizhub C300i - Connection Failed window pops up every 5-10 minutes

    turn soft sw 172 to hex 01. also turm market place off in iws tab in admin.
  21. Thread: Bizhub

    by Woxner
    Replies
    19
    Views
    1,196

    Re: Bizhub

    what is the model on the door? you need to change the soft sw to read machine. set sw 10 to hex 02 this will give model on config page. you can do a network reset is service mode to see if tab shows...
  22. Replies
    9
    Views
    637

    Re: Bizhub 282 Abort Code

    duplicate ip will do this too along with a bad job. driver is old and maybe an issue with some jobs
  23. Replies
    10
    Views
    1,954

    [Error Code] Re: 32-05 On Konica Minolta C300i

    found this aProblemIntermittent 32-05, 30-03 and 93-10 jam codes along with paper creasing.

    Solution
    CAUSE: Possible incorrect positioning of the Exit path switch solenoid (SD3)

    SOLUTION:...
  24. Replies
    10
    Views
    1,954

    [Error Code] Re: 32-05 On Konica Minolta C300i

    7b is the newest firmware. it is recomended.
  25. [Dead] Re: C552ds hangig for logo konica and not download fimware scanner

    the mfp may have fixed it but were you using the c552ds firmware or the c552 they are different
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4