Search:

Type: Posts; User: mansart

Page 1 of 20 1 2 3 4

Search: Search took 0.10 seconds.

  1. Replies
    22
    Views
    1,228

    Re: Sharp MX-M904 Still Good?

    Do I leave the original SD card in the machine and use the USB port with a laptop or do I remove the SD card and plug it in the laptop to copy it?
    remove the SD card and plug it in the laptop to...
  2. Re: Utilizing google drive with single sign on

    SSO to Cloud Services
    The color Advanced and Essential series has an “Email/Cloud Connect” feature to print from and scan to popular cloud services including:
    • Gmail™ webmail service (OAuth)
    •...
  3. Replies
    4
    Views
    268

    Re: Service mode back door

    Remote Op.....
    Browse to IP of printer>>Go to Operation Settings>>>>Scroll 2/3 rds of the way down in main window, Look for Remote Operation
    Go to Operation from Specified PC section..... change to...
  4. Re: MX-M904 Finisher Jams in the Saddle Fold entrance area.

    I would start by swapping out the inlet sensor FSS201
    43768

    If multiple pages are bunching up at Saddle inlet port roller, that would indicate .....

    1. Roller is sometimes not being...
  5. Replies
    2
    Views
    218

    Re: Mac Printing issue - MX-3071

    If you are not using SNMP on the copier for anything, disable it.
    Network>Services
  6. Re: MX-M904 Finisher Jams in the Saddle Fold entrance area.

    First thing I would do is firmware.

    According to bulletin below, there was a firmware upgrade to the FN22 to allow it to work with the M904.

    Because you started with a new machine and a used...
  7. Re: MX-M904 Finisher Jams in the Saddle Fold entrance area.

    Print out a SIM 22-6

    P*C* 22 start
    6 start
    execute.....yes

    Scan and post the first page that prints out.
  8. Thread: Sharp MX-3140n

    by mansart
    Replies
    12
    Views
    766

    Re: Sharp MX-3140n

    This setting shows up in the MX2310 op manual.....MX2615 op manual....MX2616....MXxx40, MX5141 etc.

    Apparently its been around for past few generations of color....Wonder if it works for "Down for...
  9. Re: M503N intermittent F1-08 finisher code ???

    Sounds like you've covered all your bases.....

    One this to be aware of is that model finisher has different versions of firmware depending on model of base machine.

    So you may want to check and...
  10. Thread: Sharp MX-3140n

    by mansart
    Replies
    12
    Views
    766

    Re: Sharp MX-3140n

    Read the thread, all info there....


    "system settings">"enable/disable"

    Once color is disabled, the setting vanishes from "enable/disable"

    To re enable color SIM 14
  11. Re: Printing from/saving to USB key 3.0 on MX565 & MX5070

    Ditto....I've shown it countless times......customers ooh and aah, but is honestly the last time they think about it
  12. Thread: Sharp MX-3140n

    by mansart
    Replies
    12
    Views
    766

    Re: Sharp MX-3140n

    This was not a restriction....it is a complete disable of color.
  13. Replies
    5
    Views
    205

    Re: SMBv2 on MX-3100N

    No SMB v2 for the MX2600/3100

    Only SMB 1

    **This is an older post, so anything newer that the MXxx70 series supports SMB3

    The following devices support SMBv1 and SMBv2


    MXC301W
  14. Thread: Sharp MX-3140n

    by mansart
    Replies
    12
    Views
    766

    Re: Sharp MX-3140n

    To be quite honest I have never seen the option to disable color......have never looked either.

    The setting does not appear on all color machines. Does not show up on newer 70's &71s, nor does it...
  15. Replies
    8
    Views
    463

    Re: Techdata issues in the US

    Here are your shipping choices, when placing order......
    43698
  16. Thread: Sharp MX-3140n

    by mansart
    Replies
    12
    Views
    766

    Re: Sharp MX-3140n

    43689

    43690

    SIM 14
  17. Replies
    8
    Views
    463

    Re: Techdata issues in the US

    So far so good in the northeast.
  18. Replies
    6
    Views
    246

    Re: network trouble mx5071

    I've seen some machines be affected by POE.

    Put a cheap hub between machine and network, this will knock out the POE before it gets to machine.

    See if that helps.
  19. Replies
    6
    Views
    246

    Re: network trouble mx5071

    Is the 5071 using the same IP address as the old 2600?

    Let the 5071 boot up with DHCP enabled and see if you have same problem.

    Was there a reservation on the router for the 2600 MAC address?
  20. Replies
    6
    Views
    246

    Re: network trouble mx5071

    To change the NIC speed:
    Enter Simulation 55-03 and select Soft Switch 6.
    Set SW6-1 through SW6-4 to match the network speed.
    The Gigabit speed setting in SW6 would appear as shown below:
    ...
  21. Thread: Sharp MX-3140n

    by mansart
    Replies
    12
    Views
    766

    Re: Sharp MX-3140n

    How and where did you disable color mode. ???
  22. Re: Can't import CSV files on MX-5070N: c:/fakepath/ instead of real file location!

    Manually add one address to machine in question.

    Then export to CSV file.

    Open this CSV file and fill in desired addresses, this will ensure CSV file is in correct format to ensure proper field...
  23. Re: Can't import CSV files on MX-5070N: c:/fakepath/ instead of real file location!

    43602

    The display of "C:\fakepath\xx.csv" is normal
  24. Thread: SMB3 scanning

    by mansart
    Replies
    8
    Views
    363

    Re: SMB3 scanning

    The 3640 will support SMB 2 with firmware Version 0600A2B0_A

    The 623 and 754 will support SMB 2 with firmware Version 0404d3s0_A


    That is a close as you are going to get with these machines.
  25. Thread: SMB3 scanning

    by mansart
    Replies
    8
    Views
    363

    Re: SMB3 scanning

    **This is an older post, so anything newer that the MXxx70 series supports SMB3

    The following devices support SMBv1 and SMBv2


    MXC301W
    MX-M266N/316N/356N
    MX-M364N/464N/564N...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4