Search:

Type: Posts; User: DOE

Page 1 of 9 1 2 3 4

Search: Search took 0.12 seconds.

  1. Konica bizhub c224e light streaks through color copies only

    Have a bizhub c224e where I get light streaks through color copies only they are about an eighth of an inch wide and run from lead to Trail Edge. 4 consumable Life the developer units for all the...
  2. Re: Konica 458 533 finisher Staple alignment issue

    Have you ever replaced belts on that finisher. I know some of them are Not to easy to replace on certain finishers
  3. Re: Konica 458 533 finisher Staple alignment issue

    Going to try this but paper comes out flat no curl.
  4. Konica 458 533 finisher Staple alignment issue

    Konica 458 with a 533 finisher. If I make 4 copies to be stapled the second and third copy do not quite get pulled in enough and sometimes miss the staple. The second and third copy will usually...
  5. Konica bizhub 222. I/c life increases by 15 with every copier

    Have a Konica bizhub 222 that had a c2557 code. I replace the drum and the developer and blade ran f8 and before that reset the 3 life counts. It all went well and the code came off and then make...
  6. Replies
    6
    Views
    380

    Konica c35 no yellow on copy

    Have a c35 that ran out of yellow toner. When the cartridge was replaced there is no yellow print on the copy. Tried another toner cartridge just in case and there is still no yellow print on the...
  7. Konica models that can be used to print from phone

    Which Konica models are you able to use your phone to print too. We have a customer wanting one and some confusion with the company we buy from whether it can be done or not. Please let me know the...
  8. Replies
    1
    Views
    205

    Konica 222 blank copies

    Have a customer with a Konica 222 that called and said that the copies are blank whether they print from the computer or The copier. Hate to ask a question about something I have yet to look at but...
  9. Replies
    4
    Views
    500

    Re: Konica 458 FS 533 jams on 2 sided copying

    The top plate of the sorter is actually hitting the exit switch causing the paper to curl up. The exes which hangs down a good quarter inch lower than the top plate so the top plate pushes against...
  10. Replies
    13
    Views
    906

    Re: Konica c360 print on Lower fuser roller

    It is double printing on the side that you print on
  11. Konica c35 yellow toner cartridge says empty when it's full

    Installing installed a used Konica c35. Checked it out and it made find color copies. Sometime after we left the yellow cartridge says empty into replace even though it's full. Any idea what might...
  12. Replies
    13
    Views
    906

    Re: Konica c360 print on Lower fuser roller

    You see The Double Image from what you are printing on the card not what was pre-printed
  13. Replies
    13
    Views
    906

    Re: Konica c360 print on Lower fuser roller

    Do you see The Double Image from what you are printing on the card
  14. Replies
    13
    Views
    906

    Konica c360 print on Lower fuser roller

    Have a funeral home that has a Konica c360 that when they run their funeral cards through the bypass print gets on the lower fuser roller and causes double printing on the cards. The cards are slick...
  15. Replies
    4
    Views
    500

    Konica 458 FS 533 jams on 2 sided copying

    Heading Konica 458 that had a JS 506 on it and I took a 533 out of a c224e and installed it in the 458. One to one works fine but when I tried to duplex it curls up and jams before it makes it into...
  16. Konica c360 529 finisher. Staple alignment problem

    Have a Konica c360 with a 529 finisher on it at the last page out when stapling doesn't get pulled back in all the way and the staple misses the page. Always seems to happen to the last page. I...
  17. Hp 426fdw fax will send but not receive communication error 252

    Pretty sure I have it figured out it was a rainy crappy day here today. Read that the code Matt transmission to poor to send a fax so we're going to try again tomorrow when it's dry out. If that's...
  18. Replies
    3
    Views
    568

    Samsung clx6250. Blank areas and black spots

    Samsung 6250 that sat for a month and getting blank areas and black spots. Black copies are worse than color. The first copies I made look decent and then the more I made the worse it got. Does...
  19. Replies
    3
    Views
    410

    Konica c35 colors do not match

    Have a Konica c35 that green comes out blue and red comes out pink. I do not have a service manual for this copier can anybody tell me how to adjust the color. Thanks
  20. Re: Canon lbp6650 dn. Black copies when new cartridge installed

    That didn't seem to make any difference and I was wrong they are not genuine Canon toners
  21. Canon lbp6650 dn. Black copies when new cartridge installed

    I have a Canon imageclass printer that has black copies when a new cartridge was installed. Sent back cartridge got another new one and still have black copies. When I install the original drum unit...
  22. Replies
    4
    Views
    580

    Konica c35 says calibrating won't copy

    I have a Konica c35 that says calibrating all that time and won't allow you to copy. I have clean the lamp and it looks fairly bright to me. I did reset the transfer belt unit approximately two weeks...
  23. Is konica minolta 350 compatible with any of the monolta di models

    Wanted to see if the Konica Minolta bizhub 350 was compatible with any of the Minolta d i models as the Minolta Parts seem to be cheaper thank you
  24. Replies
    2
    Views
    845

    HP m477. Red is faint

    HP m477 the red is faint. Cleaned machine, tried new red drum unit and did color calibration and the red is still very light. Any ideas
  25. Replies
    5
    Views
    699

    Konica c364. Reset fuser transfer belr

    Konica c364 that diffuser section and transfer belt is about to need replaced. Is there a fuse or a chip I can use instead of replacing the unit. Thanks for your advice
Results 1 to 25 of 211
Page 1 of 9 1 2 3 4