Search:

Type: Posts; User: jrob416

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. Replies
    3
    Views
    329

    MP C 6003 J019 jams

    I have been dealing with an MP C6003 with a constant J019 jam. Leading edge comes to the fuser, but stops there. I have changed fuser and entire 2nd transfer unit with no luck. I have checked sensors...
  2. Replies
    6
    Views
    369

    [Misc] Re: Card reader issues

    Thanks to everyone who sent questions and suggestions. I finally broke down and replaced the print controller and HDD to bring this copier out of its funky state.
  3. Replies
    6
    Views
    369

    [Misc] Re: Card reader issues

    Have not been able to reach user tools.
  4. Replies
    6
    Views
    369

    [Misc] Re: Card reader issues

    Yes, machine has HDD. The top slot has a PS sd card, with nothing in lower slot.
  5. Replies
    6
    Views
    369

    [Misc] Card reader issues

    I have an MP C4504 that has a pcProx card reader that I need to remove. The machine will not let me access service mode. The machine has a Smart Op panel and when copier is powered on, the screen has...
  6. Thread: Toner

    by jrob416
    Replies
    5
    Views
    346

    [Misc] Toner

    Is MP C 6004 toner same as IM C 6000 toner?
  7. Replies
    4
    Views
    519

    [Misc] Re: Abnormal noise in the MP 5055

    Thanks for the feedback. Will replace waste toner box ASAP.
  8. Replies
    4
    Views
    519

    [Misc] Abnormal noise in the MP 5055

    Has anyone had unusual noise issues with the MP 5055? I have a customer who says they have the occasional noise that I have yet to hear. My hearing is not what it once was, so this noise may be out...
  9. Replies
    10
    Views
    1,625

    [Jamming] Re: Ecosys M5526cdw

    Thank you. It was the clutch. I did not think that after 304 total pages the clutch would be fouled up. Took a little 600 grit cleaning paper to it and now all is fine. Thanks again.
  10. Replies
    10
    Views
    1,625

    [Jamming] Re: Ecosys M5526cdw

    The fuser passes the paper through. Page is found on top of fuser, not passing out to exit tray.
  11. Replies
    10
    Views
    1,625

    [Jamming] Ecosys M5526cdw

    I have a M5526 that gives a constant Jam 4211. Paper exits fuser and crashes into exit/eject unit and stop, z folding at above fuser. When jam is removed, there is no image on paper(printing from...
  12. Replies
    3
    Views
    740

    [Error Code] Ricoh MP 5054 Hidden SC code

    Customer has a 5054 that began to give a Functional error, restart machine, with no SC code. Printed SMC report to get hidden SC code and found that machine was giving an SC 540-00 code. This is a...
  13. Thread: J 508 jam

    by jrob416
    Replies
    3
    Views
    646

    [Jamming] Re: J 508 jam

    Yes
  14. Thread: J 508 jam

    by jrob416
    Replies
    3
    Views
    646

    [Jamming] J 508 jam

    I have been working on a Kyocera Ecosys M5526 that throws the occasional J508 jam code. Only happens when customer uses duplex function. Printer puts 1st image on paper, page passes through fuser,...
  15. Thread: eStudio 233

    by jrob416
    Replies
    4
    Views
    1,893

    [CQ] eStudio 233

    Been working on an eStudio 233 that folds the leading edge of the page at the back corner. This happens only on Letter, not LetterR orientation. I have cleaned, polished fuser entry guide, replaced...
  16. Replies
    8
    Views
    1,629

    [Misc] Re: MP C 5503 with false tray full message

    Sorry it has been so long since I have responded to this thread. First, thanks for the responses. Greatly appreciated. Second. Has anyone used the auxiliary tray, p/n D688 6626? Still trying to...
  17. Replies
    8
    Views
    1,629

    [Misc] MP C 5503 with false tray full message

    I have an MP C 5503 with a SR 3140 finisher that occasionally tells us that the shift tray is full. This message is false, no paper present. After spending some time checking the SR 3140 sensors,...
  18. Replies
    6
    Views
    1,448

    [CQ] Re: Kyocera Ecosys M5526cdw

    [QUOTE=FriendlyTech;827199]I'd look @ repetitive defects gauge in service manual and see what it matches up with. I would guess drums just from what i'm seeing.[


    Went back this morning to try...
  19. Replies
    6
    Views
    1,448

    [CQ] Kyocera Ecosys M5526cdw

    I have a Kyocera Ecosys M5526cdw that is printing docs with horizontal lines. Black line on B/W images, color line on color image. Cleaned the K charge roller and the transfer roller on rear door....
  20. Replies
    8
    Views
    5,675

    Re: MP C4503 sc324-05

    I swapped the entire developer/drum drive unit and now have a happy machine and customer. Not sure what part in the D.U. is bad. I will save that tear down for a slow day. Thanks to everyone who made...
  21. Replies
    8
    Views
    5,675

    Re: MP C4503 sc324-05

    I saw that TSB. Machine has been in an office in use daily for about a year. I also ckecked developer motor for color dev boxes. Motors turn fine. Sometimes the code pops up right after machine comes...
  22. Replies
    25
    Views
    3,441

    [Misc] Re: Ricoh MP C 4504

    I suspect that the plug was pulled prematurely this time also. Thanks for the response.
  23. Replies
    8
    Views
    5,675

    MP C4503 sc324-05

    Working with a MP C 4503 that continues to give the sc324-05. This tells me the color developer drive unit is locking. There appears to be 2 motors for the developer units. 1 for K and 1 for the CMY....
  24. Replies
    25
    Views
    3,441

    [Misc] Re: Ricoh MP C 4504

    Thanks for all of the replies. Some wonderful suggestions. Swapped HDD and RAM, for shits and giggles, with no change. Biggest improvement came when I updated Smart Ops panel firmware. It is...
  25. Replies
    25
    Views
    3,441

    [Misc] Re: Ricoh MP C 4504

    Tried the NVRAM back-up, restore remedy. No change. Swapped controller board. No good. Looking at BCU now. Thoughts?
Results 1 to 25 of 100
Page 1 of 4 1 2 3 4