Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 0.16 seconds; generated 37 minute(s) ago.

  1. Re: Konica Minolta BizHub C458 - Account track / verify issues

    I'm guessing that these drivers are on a server somewhere and endusers settings are not saved at log-off. That's one step past my experience/expertise. One of the IT guys will have to take it from...
  2. Re: bizhub 458e fusing Unit error code c-3726

    Mine was a C3826 (C368), but I only had a peripheral role. The machine was down and I got handed the fuser to install. This machine had two fusers for that reason to my knowledge. =^..^=
  3. Re: Konica Minolta BizHub C458 - Account track / verify issues

    Sorry, I don't know the exact keystrokes off the top of my head. I don't get to do it often enough. Ok, I'll try:

    On each PC: Start > search "Devices and Printers" > select print driver > Print...
  4. Re: Konica Minolta BizHub C458 - Account track / verify issues

    If each PC has a dedicated user, why not just enter the password right into the driver defaults so it never asks? Whomever uses that PC gets billed.
  5. Replies
    4
    Views
    431

    Re: Designjet Z2100 errors 61.01

    So I requested that the local IT install a PostScript and a PCL driver, test both, then remove the ones that don't work. I don't know which worked ... I suppose it doesn't matter. That part is...
  6. Thread: jamming

    by blackcat4866
    Replies
    5
    Views
    265

    [Jamming] Re: jamming

    It's the one behind the paper dust collector. You may find that it's necessary to clean the three sensors in that area. You separate the 2nd transfer assembly from the door to see the three sensors....
  7. Replies
    5
    Views
    585

    Re: HP T7100 paper load issues

    I don't know if this is pertinent to your model, but I saw this on an HP T790PS:

    Symptoms: "Paper is not loaded correctly. Remove paper and reload." even when no paper is present.
    Cause: Paper...
  8. Replies
    4
    Views
    431

    Re: Designjet Z2100 errors 61.01

    Since the enduser is locked out of Admin functions anyway, I think I've covered my bases by requesting a new PS and a PCL driver installed and tested by the local IT.

    Am I correct that Q6675D is a...
  9. Thread: Hello

    by blackcat4866
    Replies
    4
    Views
    447

    Re: Hello

    Welcome! =^..^=
  10. Replies
    4
    Views
    431

    Designjet Z2100 errors 61.01

    Enduser admits it hasn't been used in a year. When print job is sent you get "Wrong format ... " message, then 61.01 error.

    It prints internal prints with the poor quality that you'd expect after...
  11. Replies
    0
    Views
    1

    Designjet Z2100 won't print

    Enduser admits it hasn't been used in a year. When print job is sent you get "Wrong format ... " message, then 61.01 error.

    It prints internal prints with the poor quality that you'd expect after...
  12. Thread: KM c364e

    by blackcat4866
    Replies
    4
    Views
    506

    [CQ] Re: KM c364e

    On every machine that can print from USB (or print from PC), I print these:
  13. Replies
    9
    Views
    952

    Re: B958 leaving random marks on prints

    There were some Kyoceras with fuser alignment issues, that produced a similar effect. Not bizhubs. Just speculating.

    I'd try adjusting fuser speed. =^..^=
  14. Replies
    9
    Views
    952

    Re: B958 leaving random marks on prints

    If it's fuser speed, the buckle is changing as the paper is passing the drum. A misaligned fuser can cause the paper to track to the front or rear causing the paper to pull away from the drum. A4 LEF...
  15. Replies
    20
    Views
    1,496

    Re: KM Feed rollers

    You might look at the Lexmark OEM parts. They ARE for the most part Lexmark rebadges, and the only difference is black, not gray rubber.
  16. Re: Anyone else having c227ís constantly destroy yellow IUs

    Excellent find. We had a new Toshiba 3518A come in with non functional erase lamps. Fortunately on Toshiba you immediately get penny sized football shapes of developer on the drum and copies. We...
  17. Replies
    4
    Views
    710

    Re: Toshiba e-studio 352

    I hope he wasn't in a rush ... that thread is 25 months old. =^..^=
  18. Re: AS/400 printing from Kyocera Taskalfa

    Thanks Ken. I knew it was different, but not just how different. =^..^=
  19. Replies
    1
    Views
    847

    Re: KM-1650 Laser Unit needed

    **bump**
  20. Replies
    4
    Views
    567

    Re: C7000 pro with black not registering

    Maybe I'm wrong ... but I think he means that he's not getting very good black density, not an issue with color registration. My guess is that the main issue is inaccurate translation.

    I'm also...
  21. Re: Double feeding from Toshiba 3540 3rd Tray (LCT)

    I have seen failures of the tiny gears that counter-rotate the separation tire. I had to take a photo of the gear then drag it as big as it would go to see the missing teeth.

    I don't think there...
  22. Re: Kyocera 255 hazing pictures when printing

    ... and you don't get cf248 codes? Hanabi don't like printing webpages. I would suggest saving your webpages as PDF documents, THEN send them to print. =^..^=
  23. Replies
    3
    Views
    635

    Re: e3015ac with error C262

    Is the scanner still locked? =^..^=
  24. Replies
    9
    Views
    2,078

    Re: FS-2100 PRINT QUALITY

    Results for MC-3100

    Kyocera 302MS93042 (302MS93045) Drum Unit, Genuine (K0259)

    Yes, you can get the primary charge separate, or with the drum unit, or as part of the PM kit. =^..^=
  25. Replies
    1
    Views
    847

    KM-1650 Laser Unit needed

    I'm shopping for a laser unit (302C993092) for a KM1650 (same as CS or KM1635, 1650, 2050). More specifically it's the polygon mirror motor that I need.

    Do you mind checking your graveyard? US...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4