Search:

Type: Posts; User: mprivi

Search: Search took 0.00 seconds.

  1. [Jamming] Re: Copystar CS 3050ci Jam 0000 error please help..

    Ok...... So i changed the housing part # 302K924782 Drive Release Housing... my housing looked fine. I still get the error and the noise. Can it be something in the housing? Everything looked good....
  2. [Jamming] Re: Copystar CS 3050ci Jam 0000 error please help..

    Thanks for the help... any pointers on tackling this repair?
  3. [Jamming] Re: Copystar CS 3050ci Jam 0000 error please help..

    I'm sure it's a detailed complicated repair from the looks of the diagram, but thank you for the inspirational words. I also do have a copy of the Service Manual.
  4. [Jamming] Re: Copystar CS 3050ci Jam 0000 error please help..

    Is this the piece that needs to be replaced?
  5. [Jamming] Re: Copystar CS 3050ci Jam 0000 error please help..

    dam is itís easier to change the whole unit? Iím guessing the price is a huge difference?
  6. [Jamming] Re: Copystar CS 3050ci Jam 0000 error please help..

    I see. To have gotten the jam 0000 error fixed and was able to print stuff but now it makes like a grinding noise and a Machine failure C2730 where is the secondary transfer release casing ? Is there...
  7. [Jamming] Re: Copystar CS 3050ci Jam 0000 error please help..

    Thank for all your help... Yea your right about the cost. The noise I'm getting is now causing a Machine failure C2730... got one issue fixed and now another.
  8. [Jamming] Re: Copystar CS 3050ci Jam 0000 error please help..

    Thanks I'll try and locate a replacement part, any places you recommend?.... I also seem to get a grinding noise like is the gears aren't catching then the draw is closed or the printer boots up. I...
  9. [Jamming] Re: Copystar CS 3050ci Jam 0000 error please help..

    OK so i touched the other one and the blue light is gone as well as the JAM code... But i tried to print and got a JAM code 4011 and 4012... the 2 orange rollers at the top where its getting stuck...
  10. [Jamming] Re: Copystar CS 3050ci Jam 0000 error please help..

    The "U" on the bottom of the conveyor door doesn't do any thing when i touch it. The light stays lit up.
  11. [Jamming] Re: Copystar CS 3050ci Jam 0000 error please help..

    Thanks Billy.. Yes I am just an end user. I don't have a service manual. The conveying unit is the section that pulls out on the side correct?
  12. [Jamming] Re: Copystar CS 3050ci Jam 0000 error please help..

    I ran the U031 and Regist and Exit Job Separator are highlighted blueÖ Iím not sure where to go from there. How would I toggle the sensors? Iím not sure what the sensors look like.
  13. [Jamming] Copystar CS 3050ci Jam 0000 error please help..

    I have a Copystar CS 3050ci getting a Jam 0000 error and I can't seem to clear it. There isn't any paper jammed any where in the unit. I know the unit is older can it be the sensors need to be...
Results 1 to 13 of 13