Search:

Type: Posts; User: MarioTech

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    6
    Views
    488

    Re: 6560c ADD TONER CONDITION FOR BLACK

    How many prints on the unit? I've seen several dev units lock up on these newer models and Toshiba came out with a new dev unit upgraded on the plastic housing. Another thing to look at that will not...
  2. Thread: Toner chip

    by MarioTech
    Replies
    14
    Views
    936

    Re: Toner chip

    Awesome thank you for sharing!
  3. Thread: Toner chip

    by MarioTech
    Replies
    14
    Views
    936

    Re: Toner chip

    That works fine with Kyoceras as they are mono component, when it comes to carrier like Toshibas it'll not work as it has to blend in with the carrier and create a toner/carrier mix with proper...
  4. Thread: MJ-1112

    by MarioTech
    Replies
    4
    Views
    451

    Re: MJ-1112

    By now I believe you took care of this issue, but on these models the bushings lock up on the shafts that move entrance system. Lubricate them and move the manually both ways until it feels smooth...
  5. Thread: Toner chip

    by MarioTech
    Replies
    14
    Views
    936

    Re: Toner chip

    Mac It's not possible on newer models to do this, the money you save on generic toner you will burn on washed out developer material and hours of cleaning the depleted toner plus developer inside the...
  6. Replies
    9
    Views
    756

    Re: Toshiba 456 tray 1 and 2 jams

    Like you said, for now it will. If the unit has over 250k on those models pay attention to the 2 side paper guides with flattened spots right outta each tray. Those as well as the actuators have to...
  7. Replies
    5
    Views
    901

    Re: 2508 password

    Changing/setting of the service password
    (1) The [SETTINGS] screen is displayed by press [SETTINGS] on [FS Menu].
    (2) Press [Service Password] to change or reset the service password.
    Let me know...
  8. Kyocera M6630cidn not printing mixed size from MAC High Sierra

    Hello everyone, thanks in advance for the help here!
    So like the title says, I installed a Kyocera Ecosys M6630cidn a few weeks ago and a couple of days later the optional tray came in as the user...
  9. Replies
    17
    Views
    985

    Re: 458e shuts down during job

    I agree with the other techs, put the test probes on drop and run it, could be it's dropping too low or the cables are messed up. I had not too long ago a similar problem and over the weekend the...
  10. Replies
    60
    Views
    4,240

    Re: Looking at selling Konica Minolta.

    Correct always had the 15 or 20 amps ESP surge protectors, never installed a single unit without one of those. I agree with you in regards the HDD, but the Main board was a bit of a problem as just...
  11. Replies
    11
    Views
    1,146

    Re: Toshiba e4555c IP address issue

    Dave another device is picking up the IP of the copier, like the guys mentioned on here. It could be a phone, the Nest Ac remote, anything. The best solution is to pick a new IP, make sure it's not...
  12. Replies
    7
    Views
    569

    [Jamming] Re: paper curl problem in pro8120s

    Hola Dieguito! Looks like the paper doesn't have enough body to support the speed, a lot of paper dust piled up on those reg rollers, the one thing I can suggest is increasing the transfer voltage so...
  13. Replies
    60
    Views
    4,240

    Re: Looking at selling Konica Minolta.

    I'm glad you are looking into KM's, I suggest you work on a business plan based on Phil's questions posted on the forum as I know their quota can be challenging depending on the structure of your...
  14. Re: Most common problems with the EBM machines?

    I agree with blackcat, I can add the fuser films on the console units won't last as long as manual says, so stock up a few of those and the oil that goes inside as well as the felt are critical for...
  15. [Misc] Re: Problem with e_studio 757 (dot on printed paper)

    I agree with the rest of the guys, however I only see developer on the front side of the drum unit. Did you vacuum the rest or was it only piled up at the front? I see a line on the drum as well that...
  16. Replies
    8
    Views
    975

    Re: no File_share

    After OS update SMB is blocked as OS detects it as a threat, most likely the OS's that aren't working are Pro version of W10. Enable SMB protocols, restart the PC and then try to create the shortcut...
  17. Replies
    2
    Views
    1,370

    Re: Ricoh MP C4502 Error Code SC362.00

    I probably should've said genuine, I just called him and he says it's genuine Ricoh toner however you are correct he did not buy it from me as this is a new client. I'll inspect closely the pump and...
  18. Replies
    2
    Views
    1,370

    Ricoh MP C4502 Error Code SC362.00

    Good morning techs,
    I have a client that just called claiming he replaced the black OEM toner on his Ricoh C4502 machine, and after 20 prints the error code SC362.00...
  19. Replies
    29
    Views
    3,522

    Re: Replacing the printer and copier business

    Correct, this actually brought some sales to me as the older units they had didn't support new Mac drivers even though they printed perfect colors. The challenge I usually have with Mac's is the...
  20. Replies
    29
    Views
    3,522

    Re: Replacing the printer and copier business

    Exactly what I noticed from PC and IT aspect, most of my small clients don't have anyone to take care of their IT needs and when they have an issue they call geeksquad or one of those services and I...
  21. Replies
    29
    Views
    3,522

    Re: Replacing the printer and copier business

    It was a lot of work for sure and thank you for the compliment bud, I've been fixing copiers for 24 years now. since I was 23 years old so I've experienced quite a bit of changes and after managing...
  22. Replies
    34
    Views
    2,212

    Re: Request bizhub c220 firmware

    [QUOTE=TryToCopy;1529775]It is an old machine from the place i work, it had some issues so my boss bought a newer model and gave the old one to me, so i could try fixing the problems and use it for...
  23. Replies
    29
    Views
    3,522

    Re: Replacing the printer and copier business

    You are correct theengel, it's time consuming and not as profitable as it should be. A desktop PC is about $300 out the door but the content and programs the client uses is where the value is. I went...
  24. Replies
    29
    Views
    3,522

    Re: Replacing the printer and copier business

    Sam is right on! The best suggestion is get into PC repair and networks, I got my CCNA, MCSE and I've been capturing all the business available at my clients, from PC tune ups and tower cleaning...
  25. Thread: Need help

    by MarioTech
    Replies
    22
    Views
    1,075

    Re: Need help

    You bet!!
Results 1 to 25 of 29
Page 1 of 2 1 2