Search:

Type: Posts; User: wjurls

Page 1 of 11 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    4
    Views
    214

    Re: 1250P ghosting or shadowing

    How many miles are on the developing unit itself? If more than 5 million it needs to be replaced. Also check the cleaning input shaft and bearing (drives the cleaning brush in cleaning unit) The...
  2. Replies
    4
    Views
    189

    [Jamming] Re: C6000 power on with j3102

    In what order did you change the fuser and ADU assembly? Fuser first, then ADU? I would confirm that no ICP's are blown on the adu driver board and also the printer control board. Check the fuser...
  3. Replies
    2
    Views
    156

    Ricoh MP C3003 (D146)

    Looking for service and parts for the D146 series of Ricoh's if anyone can help? MPC 3003 particularly
  4. Replies
    5
    Views
    246

    Re: FS534 finisher with error C1102

    The clock pulse wheel can break and not spin with the motor. May require some exploratory surgery.
  5. Replies
    5
    Views
    313

    Re: Konica Minolta 951 FS-532

    My money is a short or open circuit for the interconnect wiring between the FS-532 and the Main body of the 951. The wiring that connect the finisher to the machine are often damaged from install and...
  6. Replies
    1
    Views
    159

    Re: looking IC controllers for Bizhub C1060

    Are you looking for the imbedded Konica controllers or a Fiery controller? I have 2 IC-415's (Fiery) available.
  7. Replies
    0
    Views
    110

    Parting out Konica C8000, 1051, and C1060l

    I'm currently parting out a few Konica Bizhub press machines. Complete with accessories and Fiery's.

    All machines were running when retired.

    Bizhub Press 1051 (2 units) FS-521 x 2, PF-702 x 1,...
  8. Replies
    0
    Views
    119

    GBC Ultima 65-2 (The new gray style) SM

    Hey guys, looking for the service manual for a new style Ultima 65 laminator. This is the newer gray style machine.

    Anyone happen to have this?
  9. Replies
    14
    Views
    976

    Re: DV-610 in C1060 series.

    Thanks for that. You can almost do 2 complete dev changes on the C1060 with one box of DV610.
  10. Replies
    6
    Views
    314

    Re: 1051 Putting lines on second side only

    Also check the drive coupler and grounded bearing that drives the cleaning roller. It will wear down and cause excessive play and lack of ground to cleaning brush.

    A4EUR70F00 Cleaning Gear /2 Assy...
  11. Re: C1060 with toner pile-up on the 2nd Transfer Unit

    If that filter box is at 97% you definitely need to replace it. They always look fine when removed but the internal filter is for sure clogged up. Also, while the filter box is removed, get your...
  12. Replies
    14
    Views
    976

    Re: DV-610 in C1060 series.

    I would imaging that the steel powder base is the same with a different toner mixed in. Like Blackcat noted above, once the premixed toner gets cycled out you are left with a useable developer.
    ...
  13. Replies
    14
    Views
    976

    Re: DV-610 in C1060 series.

    Interested to see how this works out over time. I have a very accurate refrigerant charging scale I could use to get the weight right. IMHO the C1060 series of machines used developing units that are...
  14. Replies
    14
    Views
    976

    DV-610 in C1060 series.

    Has anyone tried using DV-610 Developer from the C7000 series in the C1060 series machines? Or even DV-613 for the C8000? Charging by weight of course.
    I'm curious if it's the same or very similar...
  15. Replies
    31
    Views
    2,492

    [Misc] Re: Machines that you dont like

    Agreed, I only have one C3350i here and it's a pile of crap. Already needs new memory or MFP board. C8000 always makes me cringe as well.
  16. Replies
    6
    Views
    461

    Re: New issue on 1051

    1051 has 3 powers supplies. Power supply 2 which is in the bottom middle of the back of the machine (figure 14). Power Supply 1 is located in the lower left corner (figure 15). Power supply 3 is just...
  17. Replies
    22
    Views
    1,804

    Re: A Question about developer and my observations

    Developer on this line typically needs replaced between 750k and 1 Mil. If you have excessively dusty paper (or dust the collectors removed) you may see a lot less. Also, if the developing unit has 5...
  18. Replies
    11
    Views
    960

    Re: Fiery Reload.... IC-409

    I have found the you can have the ISO file on a USB and right click it and select "mount" in Windows 10 it will behave just like a cd/dvd.
  19. Replies
    3
    Views
    380

    Re: Konica Minolta Error c-4725 C7000

    Image Processing Boards are pretty reliable. I would suspect the connectors where the write units plug into the IPB.
    Machines don't travel well and it's not uncommon for connectors to get jarred...
  20. Replies
    6
    Views
    332

    Re: FS-532 Finisher Stacker Stopper repair

    Block alone not available. Have to order whole belt. If you have the old style you need to replace the belt. Total PITA. Make sure you have one of these on hand.

    8 Piece Right Angle Screwdriver
    ...
  21. Replies
    4
    Views
    445

    Re: bizhub PRESS C1060 multiple codes/symptoms

    I have a current C4505 with one of my customers C2060's. Swapped sensor units with one of the C1060's and the calibration went without a hitch. Ordered sensor and return yesterday only to find out I...
  22. Replies
    4
    Views
    445

    Re: bizhub PRESS C1060 multiple codes/symptoms

    "While I was cleaning out the cloud of yellow toner & cleaning the patch sensors I noticed that the imaging drawer would not completely close (~4mm short of closing). I've seen it on Toshibas before,...
  23. Replies
    9
    Views
    472

    Re: с6000l with 4661 error code

    Seen this a few times. You can reach in and manually tape the shutter open for testing purposes. Color registration sensors do go bad also. Just had to order one myself for a Accuriopress C2060. This...
  24. Replies
    8
    Views
    813

    [Error Code] Re: C-3511 with KM Bizhub Press C1060

    Wire length as well as a different connector. One has a 4 pin, the other has A 3 PIN.
  25. Replies
    8
    Views
    813

    [Error Code] Re: C-3511 with KM Bizhub Press C1060

    Those infrared sensors are a common fail point. For some reason I see more Temp Sensor 1 failures than I do Temp sensor 2. You can monitor what the sensors are reading in State confirmation mode,...
Results 1 to 25 of 256
Page 1 of 11 1 2 3 4