Search:

Type: Posts; User: tonerjockey

Page 1 of 16 1 2 3 4

Search: Search took 0.09 seconds.

  1. Re: Toshiba estudio 305 SE main drive unit or parts needed

    Oh man Blackcat4866, thank you so much for that.

    I can't fathom a metal pin shearing of before it breaks the plastic.

    I used to drive the pins out with a? 1/16 or 3/32 round punch and a small...
  2. Toshiba estudio 305 SE main drive unit or parts needed

    Hello everyone, i hope you are all doing good under the situations.


    i have a this call where the drum isnt turning and the paper folds up under the drum. the registration roller is turning.
    ...
  3. Re: Samsung MultiXpress X4250 LX error fuser motor failure A1-1211

    Hi Vigour, thank you.

    I saw a main drive assemble next to a Fuser exit motor in the parts book.

    Is the problem resolved by replacing the main drive unit?
    The code came up as a Fuser and Fuser...
  4. Re: Samsung MultiXpress X4250 LX error fuser motor failure A1-1211

    Yes, i was there way back. i really enjoyed it for a long while. but the color copiers in the early to mid 80's, and the low pay burned me out.

    but they could have built there stuff better,...
  5. Re: Samsung MultiXpress X4250 LX error fuser motor failure A1-1211

    yea, remember back ? i cant remember if it was 20 years ago. but some sammy's were also sold with the Xerox badge on them .

    it was such a terrible quirky design. they all needed to have the under...
  6. Re: Samsung MultiXpress X4250 LX error fuser motor failure A1-1211

    Thanks for the info Phil.

    i do appreciate it. yes, i never liked anything about sammy's. total junk inho...


    Jim
  7. Re: Samsung MultiXpress X4250 LX error fuser motor failure A1-1211

    Hi everyone, Happy Friday.
    i hope you are doing good.

    so i wanted to post the outcome on this code.


    its a far call, so i asked them to open the right side door, and look for any jammed...
  8. Samsung MultiXpress X4250 LX error fuser motor failure A1-1211

    Hello guys, i hope you are doing good and things will get back to normal very soon.


    i have this customer with the error code.
    the samsung fault isolation seems inconclusive partially.


    it...
  9. Re: Brother MFC L-3750 CDW new toners wont reset.

    Hello, i dont k now what happened to my follow up right after, but its gone now. maybe on another "reply to sender"??

    anyway, the CRUM chip contact on the machine side, i removed the cover and...
  10. Re: Please help Samsung multiXpress x4250lx stock in service mode after hitting isett

    and after getting the 7 computers reset up, they asked "how do we get a fax confirmation" and i was flipping thru the user choice, went into admin, and all of a sudden realized i hit the same startup...
  11. Re: Please help Samsung multiXpress x4250lx stock in service mode after hitting isett

    I was able to reconfigure two computers before the customer had to leave. It's the furthest customer I have so that's not supprising.
    I seem to have an uncanny ability to go into a customer, and...
  12. Re: Please help Samsung multiXpress x4250lx stock in service mode after hitting isett

    Ok, I've reset it and it will copy. Praze the Lord.

    Checking the printer settings now. Thankfully there not on a server.

    I'll post my outcome later.

    You all be safe, Jim
  13. Re: Please help Samsung multiXpress x4250lx stock in service mode after hitting isett

    Oh God.
  14. Re: Please help Samsung multiXpress x4250lx stock in service mode after hitting isett

    Phone didn't spell right and I'm panicked.

    I was just following the service entrance from the manual. I was trying to get into the service mode for the sensor cleaning.
    I didn't see that exact...
  15. Please help Samsung multiXpress x4250lx stock in service mode after hitting isettings

    I read just looking for the one management I'm diagnostics to do the act cleaning.

    I hit initial settings. Wouldn't go back so I hit language.

    I'm so screwed.

    Can anyone please help me asap?...
  16. Re: Brother MFC L-3750 CDW new toners wont reset.

    Hi guys,
    Ok so the machine only had 3220 prints on it. The drums we're at 80%.


    I cleaned the toner sensor contacts. Then took the contact board out, and 2 of the 4 wire connectors were...
  17. Re: Brother MFC L-3750 CDW new toners wont reset.

    oh cool. thanks Phil. i will try that and let you know.


    have a great day, Jim
  18. Re: Brother MFC L-3750 CDW new toners wont reset.

    Hi, the machine was asking for the toner though.
    i guess i can go there and try resetting the BK drum and see what happens.

    thank you very much, Jim
  19. Brother MFC L-3750 CDW new toners wont reset.

    Hi guys, the customer said that it asked for all 4 toners. they installed all 4 new OEM.

    the 3 colors worked, but the machine still wants a black. brother sent them another, and walked them thru...
  20. Re: HP laserjet 4350 network dont/ wont work. i'm loosing my mind, please read

    Yes, the new printer setups are usually do streamlined now it's hard to believe.

    They used to be so finicky.

    Thank God.
  21. Re: HP laserjet 4350 network dont/ wont work. i'm loosing my mind, please read

    so are you saying that the jetdirect card was the cause of the registration sensor issue?
  22. Re: HP laserjet 4350 network dont/ wont work. i'm loosing my mind, please read

    that is precisely how i had the N620. i replaced it for a customer a few years ago, for some intermittent failing to print. i think i put in a N610 since i wasnt sure if that was what was wrong.
    ...
  23. Re: HP laserjet 4350 network dont/ wont work. i'm loosing my mind, please read

    for what its worth, and i must say, i really appreciate you all helping me.
    its just mind boggling how we go thru so many things and then years latter, after not seeing those models and then i'm...
  24. Re: HP laserjet 4350 network dont/ wont work. i'm loosing my mind, please read

    i did reinstall the embedded formatter and then inserted the N620 into that. that allowed it to print.

    i tried to say that earlier, but guess i didn't.


    and i did have the HP printer driver...
  25. Re: HP laserjet 4350 network dont/ wont work. i'm loosing my mind, please read

    i didn't mean it to sound rude.

    yes, these are so old, and the newest lines from HP are so flimsy. just amazing how many years. i like that the P4515 series fixed the fuser drive unit. that was...
Results 1 to 25 of 382
Page 1 of 16 1 2 3 4