Search:

Type: Posts; User: anothertech

Page 1 of 20 1 2 3 4

Search: Search took 0.43 seconds.

  1. Replies
    7
    Views
    167

    Re: Mp 1350 reduce speed

    Is the machine jamming? Be prepared to replace the registration roller when running NCR on this model. It's kind of a pain to get the registration assy out.
  2. Replies
    20
    Views
    916

    Re: Ricoh MP C3003 iding noise

    Hytec is excellent for board repair, they even update board firmware that is not upgrade-able in the field. They typically charge half the price Ricoh will charge for a new board. Well worth the...
  3. Replies
    5
    Views
    215

    Re: mp 2852 sc 670 error

    Try it with the harddrive disconnected.
  4. Replies
    20
    Views
    916

    Re: Ricoh MP C3003 iding noise

    Go in to service mode and run the motors in I/O mode, you should be able to narrow it down.
  5. Re: using a mpc4503 drum/dev unit on a mpc3503?

    I've been tempted to release the spring on all of them, wouldn't it make the drum unit last longer?
  6. Re: ricoh mp402 problem "install the toner cartridge"

    Try replacing ID chip. part # M1873360 and check wiring from the chip back to the board.
  7. Replies
    10
    Views
    351

    Re: sc 325-00 in pro 8120s

    I have never replaced a developer unit on an 8100, or 8200 series yet, we have many with over 10 million, some with over 20 million, even a handfull over 30 million clicks and they are single...
  8. Replies
    10
    Views
    351

    Re: sc 325-00 in pro 8120s

    Try replacing the Charge Corona Assy. D1792255
  9. Replies
    15
    Views
    585

    Re: MPC6502 fuser to an MPC8002

    Might be better to take all of the good parts from the new fuser to rebuild the used fuser.
  10. Re: Remote Panel Operation on a mobile device

    Once he gets connected, what would this be used for?
  11. Replies
    23
    Views
    1,091

    [Dead] Re: RICOH PRO C5100

    Look for the birth certificate, it is kept near the waste toner bottle on some machines.
  12. Replies
    8
    Views
    1,368

    Re: Pro 8120s Problem

    I had no idea that you could print through the optional nic without attaching a Fiery to it. Good job, thanks for the follow up.
  13. Replies
    13
    Views
    748

    Re: Li-Fi Networks Exposure

    I just tried looking at the remote with my cell phone camera, I don't see any activity when I press the buttons.
  14. Replies
    20
    Views
    615

    [Error Code] Re: Ricoh MP C4500 SC202

    I'd try the motor first, then the BICU if need be. If the BICU is fried it will not hurt the motor. Some BICU's can be fixed if you can find out what got fried. We used to call Hytec, sometimes they...
  15. Replies
    20
    Views
    615

    [Error Code] Re: Ricoh MP C4500 SC202

    Did you try to order AX060396 Polygon Mirror Motor?
  16. Re: MPC3002 Can't do a printer automatic colour calibration

    We are still waiting to hear,

    Did you put plain paper in tray one?

    Can you see the printer in user tools?

    Can you see the printer in service mode?

    Does it still say "Setting Change" in...
  17. Re: Ricoh IMC4500 - Fiery E25c controller issue

    This is a common issue with the new Fierys, I see it a lot on the Pro 8300 and Pro C7200, all firmware and patches are up to date. Best we can do for now is to just reboot every few days. Maybe they...
  18. Replies
    4,635
    Views
    892,125

    [Funny] Re: Joke of the Day

    Som ting wong with this joke.
  19. Re: update firmware list for Ricoh MP C2504

    Turn on Auto Remote Firmware Update and it will stay up to date on its own.

    Sp5886-111 to 1
  20. Replies
    15
    Views
    777

    Re: sc442/sc370-02 MPC4503

    I pulled these Ideas from another post...

    the Magenta toner motor also acts as the ITB lift motor. see page 7-95 of the Detailed Description.
    part # D1493280


    see video nugget Answer ID...
  21. Replies
    9
    Views
    378

    Re: Mp c4504 java update problem

    Yes, I had replaced the hard drive and they were going to reload Streamline remotely, but first they wanted to update the firmware and java, which they did remotely. I took quite a long time for...
  22. Replies
    9
    Views
    378

    Re: Mp c4504 java update problem

    It can be done with Remote Install Manager on some machines, I am not sure about this machine, but I'm assuming it can be because the original poster here has the D2415579W_edc.ifu file. That is the...
  23. Replies
    9
    Views
    378

    Re: Mp c4504 java update problem

    Were did you get that edc.ifu file?

    I think you are correct in saying that you need Remote Install Manager to use that file to update java remotely.
  24. Replies
    13
    Views
    626

    Re: Ricoh 3053, 3054 no print scan

    I would try a new hard drive, if still no good then controller PCB.
  25. Replies
    9
    Views
    624

    Re: MP 7502 j020 jam

    Try replacing the duplex flapper as well as the rubber damper that sticks to it, and replace the flapper solenoid with it as a set.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4