Search:

Type: Posts; User: copyman

Page 1 of 20 1 2 3 4

Search: Search took 0.22 seconds.

  1. Replies
    3
    Views
    122

    Re: C308 won't exit power save

    Turn off sleep mode. Go into serv mode and under sleep tab (not sure sys 1 or 2) select "permit", exit and enter admin mode and turn off sleep. This was a problem with the "4" series and I...
  2. Thread: C454

    by copyman
    Replies
    3
    Views
    175

    Re: C454

    Did you change the drum ? Are any consumables overlife? Like the tsbservice said there are many post about this issue.
  3. Replies
    11
    Views
    432

    [People] Re: Copier Technicians are "Front Liners"

    I didn't mean to underestimate the techs that do or have to service hospitals, food plants, etc. THANK YOU ALL!!!

    I just don't service any accounts that would justify me being a "frontline...
  4. Pitnet Bowes Di-600 inserter service manual

    Hi,

    Does anyone have the service manual for the Pitney Bowes Di-600 could send me? I was able to find the parts book online but not the service manual.

    I posted on this forum to see if any...
  5. Replies
    11
    Views
    432

    [People] Re: Copier Technicians are "Front Liners"

    I wouldn't consider a copier technician a frontline worker unless doing service in hospitals, labs, etc. I personally wouldn't go into a hospital or doctors office at this poist so guess I'm not a...
  6. Thread: Bizhub c360

    by copyman
    Replies
    7
    Views
    439

    Re: Bizhub c360

    have you tried all the obvious passwords?

    9272927292729272

    92729272

    12345678

    00000000
  7. Replies
    19
    Views
    1,023

    Re: Is this true.....

    This has been fought in courts many times and the OEM always lost. They have to allow aftermarket toners to be used in their machines! But the question is how the OEM's "sabotage" their machines so...
  8. Replies
    0
    Views
    102

    Pitney Bowes Inserter

    Any Indy's in the Phila / S. Jersey area that can service a Pitney Di-600 inserter?

    PM me if you can do it.
  9. Replies
    3
    Views
    136

    Re: KIP 7100 wide format parts guide needed

    Don't know Kip that well. I tried to get it off the Kon/Min dealer website but 7100 wasn't listed. They had the 7170, 7700, etc if any other machine is similar I can send you that. Weird they had...
  10. Replies
    3
    Views
    118

    [Error Code] Re: C3351 Error Code C-2153

    I've never had that code but the code is related to the transfer belt.

    Remove the transfer belt and inspect. Make sure not torn or binding.
  11. Replies
    3
    Views
    236

    Re: C284e yellow almost missing

    Why did you replace the yellow Dev unit awhile back? If it was because it dumped did you replace the yellow drum at same time? There is no toner pump on Kon/Min like Ricoh has.

    If I was to guess I...
  12. Replies
    4
    Views
    156

    Re: Bizhub c451 control panel unresponsive

    I have replaced several touch screens that have failed on these models. Still have maybe 20 of the C451 & C253's (same control panel) that I still service and many of them had the touch sceen go bad....
  13. Replies
    6
    Views
    162

    Re: C224e replacing dev unit and roller

    I'm guessing he read on this forum that if a dev unit crashes because of over life drums to replace both units together.

    If OEM parts are used just swap out dev & drum units turn machine on and...
  14. Replies
    10
    Views
    524

    [Electrical] Re: total counter changes

    Agree this wasn't necessary. Mike asked a good original question. And also man enough to admit he didn't think about checking the parts, etc counters.
  15. Replies
    5
    Views
    342

    Re: hp laserjet 2015

    Ha-ha, I've baked a few 2015 boards. Didn't believe it at first but it worked! Out of maybe 10 I did only one didn't work.
  16. Re: Bizhub 363 is not booting, only hourglass continue

    There is a member on this forum name Hans. Think is living in Germany now. He knows Kon/Min very well. Perhaps send him a PM and introduce yourself. He sells the best UFR for the C223 series.
  17. Re: Bizhub 363 is not booting, only hourglass continue

    [QUOTE=FrohnB;1474309]I believe You must have access and credentials to a secure Konica Minolta web site, and will need a tech or KM representative to come out and make sure they agree with your...
  18. Re: Bizhub 363 is not booting, only hourglass continue

    [QUOTE=FrohnB;1474309]I believe You must have access and credentials to a secure Konica Minolta web site, and will need a tech or KM representative to come out and make sure they agree with your...
  19. Replies
    3
    Views
    290

    [Error Code] Re: Machine Model C284e - C-FA14

    The other posters are spot on... Attached are a few bulletins about this.
  20. Replies
    7
    Views
    387

    Re: Konica Minolta C253 RAM Replacement

    You can probably use any RAM with same specs but I've never had any luck with that on other models. I've worked on 100's of that model and maybe once did I have to replace RAM. The reason the other...
  21. Re: C224e - very bad print quality - Magenta is missing

    The thing I really miss is not being able to rebuild fusers or replace the UFR "onsite"

    I'm ok with the drums & developer units being seperate, way better than a whole image unit (C253, etc). And...
  22. Re: C224e - very bad print quality - Magenta is missing

    Agree well worth running drums past life. If it dumps once no big deal, you are still way ahead of the game with not buying drums. Easy to just replace drums as soon as called for when working for...
  23. Replies
    6
    Views
    291

    Re: Anyone familiar with the BH 25e ?

    Just looked at your picture again. That is the Biz 25 NON "E". I think this was a Kon/Min made box and wasn't that good. The 25 "E" covers are black and is made by Muratec. It is a decent small box....
  24. Re: C224e - very bad print quality - Magenta is missing

    Like others said the developer had dumped. A lot of posts on this forum about this issue. This happens from overlife drums shorting out. Could be other overlife consumables but usually the drum....
  25. Replies
    13
    Views
    641

    Re: C554 vs c454 fuser?

    Also wanted to add I've seen both cleaning rollers removed and machine ran 100's of thousands prints with no fuser issues. All single side of course, don't think it would hold up well with a lot of 2...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4