Search:

Type: Posts; User: kuby

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. Re: Swapping Booklet Finisher to a Canon 7565 Service Mode Changes?

    No sure it is in service mode. I think you have to tell it in the print driver device settings.
  2. Replies
    6
    Views
    484

    Re: Kyocera M3645 Fax Issue

    You could always test it by putting double sided pages in the document feeder and try faxing. That way you would know if it was inserted the wrong way.
  3. Replies
    8
    Views
    453

    [Misc] Re: NEW WEBSITE NAVIGATION

    They don't even show the newest version on Google Connector on the site. 2.2.31.22 pkg

    Get with it guys.
  4. Replies
    6
    Views
    205

    Re: Kyocera M8124 firmware

    And don't let Windows 10 install drivers. Do not know how many printing issues I have seen caused by Windows 10 drivers, not only on Kyocera, HP, Brother, Epson...... Use manufactures drivers.
    ...
  5. Replies
    6
    Views
    301

    Re: 6053ci with C3200 code

    Kyocera told me that if you are having an issue like this to first try re-installing the firmware using the FULL version and not the Turbo. It has solved most all the problems I had, except user...
  6. Replies
    7
    Views
    307

    [Misc] Re: Canon IR 3300 Photocopier Printing Black

    Replace the DRUM unit.
  7. Replies
    8
    Views
    453

    [Misc] Re: NEW WEBSITE NAVIGATION

    The old site was user friendly...the new one is not. PLEASE GO BACK TO THE OLD ONE....
  8. Replies
    8
    Views
    453

    [Misc] Re: NEW WEBSITE NAVIGATION

    Yes who thought up this ???? Very hard to find stuff. Can we please go back to the old web site, PLEASE.....
  9. Replies
    1
    Views
    182

    Re: Konica Minolta C654e Printing Isuue

    Think you would get more responses if you posted this under the Konica-Minolta forum instead of the Kyocera forum.
  10. Konica Minolta bizhub C3351 - document feeder parts manual.

    Looking for a parts manual for the document feeder for a bizhub C3351. Got one that the m111 motor is making a lot of noise and gives a scanner lock message. Is it the scanner motor or do you have...
  11. Replies
    8
    Views
    512

    Re: Generic drum for Advance 4535i

    Have used Katun drum kits for this model. Can get about the same use out of one. Been using them on these models for about 3 years. (sorry had my models mixed up) Been using Katun drums for about...
  12. Replies
    8
    Views
    512

    Re: Generic drum for Advance 4535i

    Have used Katun drum kits for this model. Can get about the same use out of one. Been using them on these models for about 5 years.
  13. Replies
    8
    Views
    541

    [Misc] Re: Kyocera ECOSYS M3040dn

    Are they using OEM toner?
  14. Replies
    5
    Views
    472

    Re: Ta 3552 ci C0800, J0100

    I would start by re-flashing the firmware with the current firmware and not the Turbo mode firmware. The manual says the image data if faulty. Then check the PF rollers for each cassette. ...
  15. Replies
    3
    Views
    214

    Re: GBC Ultima 65 laminator

    Bad switch?
  16. Thread: FS-9530 firmware

    by kuby
    Replies
    7
    Views
    328

    Re: FS-9530 firmware

    I always unzip the files and put them in the root directory. Turn the machine off and insert the flash drive and then turn the machine ON. After the updates are installed power down the machine and...
  17. Thread: Canon DADF H1

    by kuby
    Replies
    5
    Views
    294

    Re: Canon DADF H1

    The machine is 19 years old. The parts are probably non-existent by now. We do not have any left.

    Saw a couple of these on EBAY and few days ago.
  18. Replies
    4
    Views
    355

    Re: KFS register problems

    Had Kyocera call the last dealer and they removed the copier from their KFS. But the machine still would not let me register it and even Kyocera support remoted in and could not get it to register. ...
  19. Replies
    3
    Views
    233

    Re: Canon IR AdV 8295 HDD

    Don't know if this machine has the scandisk function 1&9. You can try that to see if it will repair the drive then clone it. But in some cases running the scandisk utility may crash the drive,...
  20. Replies
    21
    Views
    1,014

    Re: Kyocera 306ci - F24C error

    It should.
  21. Replies
    21
    Views
    1,014

    Re: Kyocera 306ci - F24C error

    Models are different: On some there is a work around.

    On some you can go into the Web Interface and go to Device Setting and System and turn on the Auto Error Clear.

    On other models you go...
  22. Replies
    21
    Views
    1,014

    Re: Kyocera 306ci - F24C error

    You can try going to the FRPO commands on the command line:

    Using FRPO commands for reprogramming the firmware.
    The current settings of the FRPO parameters are listed as the optional values on...
  23. Thread: Canon DADF H1

    by kuby
    Replies
    5
    Views
    294

    Re: Canon DADF H1

    What machine does this go on?
  24. Replies
    21
    Views
    1,014

    Re: Kyocera 306ci - F24C error

    That will do it. Had two machines that did that and both were corrupt data being send to printer/copier.

    Have the company sending the print job to the copier/printer send it in another format or...
  25. Thread: Windows 10 driver

    by kuby
    Replies
    1
    Views
    232

    [Misc] Re: Windows 10 driver

    Quit using the WSD driver and install the Kyocera KX driver.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4