Search:

Type: Posts; User: cscce

Page 1 of 7 1 2 3 4

Search: Search took 0.18 seconds.

  1. Replies
    4
    Views
    278

    [CQ] Re: Phaser 7500 Print Quality

    Sorry. I missed that question (it's been a rough week).
    The customer only uses genuine Xerox toner, drums, etc. and has done so for many years.

    Since they have several of these next week I'm...
  2. Replies
    4
    Views
    278

    [CQ] Re: Phaser 7500 Print Quality

    All colors or just black?

    How many copies on machine, each color (KCMY)

    Total Copies?

    Have you replaced the black developer assembly?

    The black developing unit has not bee replaced. One...
  3. Replies
    4
    Views
    278

    [CQ] Phaser 7500 Print Quality

    I am reposting this because there was an error in the original title.
    Any ideas on this? (See photos below).
    The black imaging drum was replaced but that had no effect (disregard the printout...
  4. Replies
    0
    Views
    4

    [CQ] Phaser 7500 Blurry Print

    Any ideas on this?
    Replacing the black imaging drum had no effect. My search thru the forum hasn't turned up anything similar (yet).

    4365643657
  5. Replies
    0
    Views
    325

    [Error Code] 49.4C02 error solved

    After much wrangling with the hardware on a CLJ4730 copier trying to fix a 49.4C02 error, which occurred only when scanning to email, it turns out that the sysad had blocked users from manually...
  6. Re: HP color laser jet enterprise CP 4525 error 59.F0 ITB unit ok?

    I've had several 4525's give this error. In each case it was caused by the fuser drive assembly. There's a pad on one of the solenoids (to reduce noise) but the pads deteriorate over time and get...
  7. Replies
    0
    Views
    390

    [Error Code] HP 4730 49.4C04 Error

    I'm servicing a CLJ4730 with a weird problem. When scanning to email it gives a 49.4C04 error. Sometimes the error occurs before I finish entering the email address.
    Printing over the network,...
  8. Replies
    9
    Views
    772

    Re: HP 4730 Cyan Print Defect

    Problem solved. Bad cyan cartridge. So much for user's claim that the previous cartridge "had the same problem".
    More on this later.
  9. Replies
    9
    Views
    772

    Re: HP 4730 Cyan Print Defect

    Thanks! So, these solenoids are inside the ETB? If so, then this is not likely the cause since I installed a brand new ETB and that didn't affect the problem. So I re-installed the old ETB.
    I am...
  10. Replies
    9
    Views
    772

    Re: HP 4730 Cyan Print Defect

    All print quality pages were perfect, except for the cyan page, so only cyan was posted.
    I saw this same problem a few years ago on a HP CLJ 4005 (which uses the same print engine). Only cyan was...
  11. Replies
    9
    Views
    772

    Re: HP 4730 Cyan Print Defect

    Based on the quality pages and looking at the block diagrams in the manual I'm thinking it could be a noisy HVPS. The contacts on the cartridges and the printer have been cleaned, but that made no...
  12. Replies
    9
    Views
    772

    Re: HP 4730 Cyan Print Defect

    The print quality pages were all perfect except for the cyan page (see photo).
    Also, the error log shows multiple 54.1E.xx errors (halftone calibration errors).
    Firmware was updated to version...
  13. Replies
    9
    Views
    772

    HP 4730 Cyan Print Defect

    I'm working on a HP 4730MFP (a 4700 with a scanner on it). The cyan drops out on the right side (see photo). So far the cyan cartridge has been (supplies are genuine HP) and the transfer belt has...
  14. Re: PDF's created in "File maker pro" on a mpc2050 = very slow printing.

    You could also try printing using a PostScript driver instead of a PCL driver, if there is one available for your printer.
  15. Replies
    2
    Views
    451

    Re: C5030 boot failure

    Thanks for the help. Indeed, it was a hard drive problem.

    cscce
  16. Replies
    2
    Views
    451

    C5030 boot failure

    I have a Canon c5030 that fails to boot. The progress bar appears but it never moves (stays stuck around 25%).
    Controller 1 and 2 have been verified good (tested in another copier).
    What could be...
  17. Replies
    3
    Views
    577

    [CQ] black splotches on prints

    I'm getting random black splotches on b& W prints and copies. See photo. Colors don't seem to be affected. What could be causing this? Contaminated 1st BTR? Replacing the drum had no effect.
    ...
  18. Replies
    2
    Views
    636

    [CQ] Re: intermittent color mis-registration

    The ITU has never been replaced. The page count on it is 109,000. Also, user says the problem has gradually become worse so it looks like the ITU is the problem.

    Thanks,
    cscce
  19. Replies
    2
    Views
    636

    [CQ] intermittent color mis-registration

    I have a customer whose Lexmark c780 has intermittent mis-registraion. (See attached sample.) What is the most likely cause? I haven't found anything in the service manual so far.

    Many thanks!
  20. Replies
    0
    Views
    286

    [Misc] Oce Colorwave 600/650

    I have read rnelson's post about problems with Oce 600 and 650. I'm looking for more opinions so I can give management as much info as possible about reliability, parts availability, etc.
    I know...
  21. Replies
    0
    Views
    279

    Colorwave 600, 650; also TC4 scanners

    We are considering a proposal to service Oce' Colorwave 600 and 650 printers along with TC4 scanners.
    How are these machines in terms of reliability, access to repair parts and service manuals, etc?...
  22. Thread: SP5210 SP Mode

    by cscce
    Replies
    7
    Views
    3,138

    Re: SP5210 SP Mode

    Thank you very much to all who responded. The 107 key sequence worked, but only after I replaced the HDD. With a dead drive or no drive at all I could not get to SP mode.

    Now I have another...
  23. Thread: SP5210 SP Mode

    by cscce
    Replies
    7
    Views
    3,138

    SP5210 SP Mode

    I have a SP 5210 that needs a hard drive replaced. I haven't been able to find the key sequence to get into SP mode. Reset>806182>C doesn't work nor does the old "107" code.
    Any ideas?

    Thanks in...
  24. Replies
    7
    Views
    888

    [Electrical] Re: CLJ CP4525 formattor battery

    The 4525 formatters I've seen all have the battery connectors spot welded to the battery. Suggest you pull the cmos battery holder off an old PC motherboard.
  25. Thread: HP CLJ 4600

    by cscce
    Replies
    17
    Views
    1,910

    Re: HP CLJ 4600

    Have you reset the lasers to "home" position? If not, try this - it worked for me on a 4700.
    Laser re-alignment procedure is as follows:


    Let machine warm up and indicate ready
    Open upper...
Results 1 to 25 of 157
Page 1 of 7 1 2 3 4