Search:

Type: Posts; User: luca72

Page 1 of 17 1 2 3 4

Search: Search took 0.02 seconds.

  1. Re: LD540c Put new toner in and it says toner empty replace toner

    toner pump, or developer unit broken internal
    check the enter hole of the the developer unit, if its empty=toner pump, if very full=developer unit broken
  2. Thread: MPC 5503..

    by luca72
    Replies
    7
    Views
    245

    Re: MPC 5503..

    jam code...please..lol

    you checked the fuser gear, if worn?
  3. Replies
    13
    Views
    392

    Re: Ricoh MPC5000 ADF Keeps Jamming

    62 / 5000







    Risultati della traduzione
  4. Replies
    41
    Views
    5,488

    Re: MP301 PCU's failing constantly

    I on a couple of occasions, I used type28, it worked great👍
  5. Replies
    7
    Views
    285

    [Misc] Re: SP9100dn Excessive Dev usage

    hello, try to check the "classification assy, ​​unit" that kind of transparent plastic cylinder (above the development group) the flaps often come off, which act as a reel, if it does not work well...
  6. Re: Faint Black on Ricoh MPC2003 color pattern, copy and printout.

    with your fingers, turn the gear of the black development group a few turns, back and forth a dozen times, to clean a doctor blade, and try, then try to reverse the pcu of black (pcu only), with that...
  7. Re: Metis sleeve assy.d150-4042 for small model?

    then, it wasn't just my impression! became so by itself. but not only that. I know English enough, but to write more fluidly, I use the translator, which I noticed that now, it sucks more, I have to...
  8. Re: Faint Black on Ricoh MPC2003 color pattern, copy and printout.

    didn't you forget to reassemble the back cover of the pcdu?
    in any case... clean ID sensors, and run the sp process control routine (all) via sp process.

    p.s. don't trust too much of that sp...
  9. Replies
    3
    Views
    330

    Re: Ricoh MP C3003 makes thumping sound

    common problem on that type of fuser design, sometimes very loud, tac-tac-tac-tac-LOL, you can solve it, without disassembling , through the paper entry and output slot, insert with a syringe, with a...
  10. Re: Metis sleeve assy.d150-4042 for small model?

    thank you very much, you saved us money and space, avoiding to buy another spare one, for the smaller models
  11. Metis sleeve assy.d150-4042 for small model? [solved]

    hello everyone, I tried to search here on the forum, but honestly I could not get a 100% confirmation, with a view to streamlining the spare parts warehouse we are trying to unify several parts, I...
  12. Replies
    35
    Views
    1,721

    Re: MPC 5504 Ex Service Lock and Changed Passwords

    go wrong, you can try to ask a ricoh card repair service, our supplier can provide us with new nv-ram, with the counter reset, (for example mp2501 = 70euro if I remember correctly), many customers...
  13. Re: printer preferences from old machine to new machine

    I did not know this, interesting, thanks
  14. Re: SC 362 - No developer in the all development units (IMC 2500)

    leaving aside the discourse that powering complex electronic devices such as a photocopier with a generator, is the worst thing that can be done.

    maybe the customer ignorantly emptied them (?) it...
  15. [Misc] Re: Ricoh AF MP 5054 scan to qnap stuck on waiting.

    hmm, it fails to write, try to check via wim, in the "system monitor", or print the network configuration from user tools, you will find the system monitor log there, and see what kind of error...
  16. Replies
    8
    Views
    277

    Re: Nozzle Clogging in GTP RI2000

    hi, look, i don't know that model, but i can give you two tips about inkjet machines:
    1) especially the professional ones, once the inert liquid has been freed and the ink passed, the customer must...
  17. Re: Help looking for NVRAM or CNtrler board for mpc8002

    I would suggest you to ask some of your card repair suppliers, for example from us, the supplier who provides us with the ricoh card repair service, he can also sell us the nvram (even reset), about...
  18. Replies
    13
    Views
    626

    Re: MP C4504 double imaging

    here, we call them that, because they crumble quickly, as if they were made of white chocolate .. ..."galak" in fact..LOL
  19. Replies
    3
    Views
    161

    Re: aficio mp 2000L scaner

    you have to download the twain drivers from the ricoh website (just to the right of the drivers) I don't know that program, we use hexonic scan to pdf
  20. Replies
    13
    Views
    626

    Re: MP C4504 double imaging

    galak fusing gear?
  21. Replies
    9
    Views
    323

    [CQ] Re: Ricoh mp6502 drum and developer units

    it's like the audi models, A1..A3..A4, I don't understand anything anymore..LOL
  22. Replies
    19
    Views
    630

    Re: Black band on Copy from Aficio 1022

    it seems the typical defect, when a small piece of paper is stuck between the cleaning blade and the drum
  23. Replies
    13
    Views
    626

    Re: MP C4504 double imaging

    you say, that they are so "strange" that when they pass between PTR, and ITB, they have a kind of slowing down because of the protrusions, which knocks the image out of register? it could be.
  24. Replies
    13
    Views
    626

    Re: MP C4504 double imaging

    obviously put the bypass paper setting, on "envelopes", then, go to the driver setting, and set the "quality settings" item, and there, change the setting, from "speed, to quality", the machine will...
  25. Replies
    14
    Views
    782

    Re: MPC3000,3500,5000,etc toner pumps

    out of personal curiosity I tried to understand the fault, using a bench power supply, on one that I replaced a month ago.
    the problem seems to be the clutch, which has lost its strength, I replaced...
Results 1 to 25 of 412
Page 1 of 17 1 2 3 4