Search:

Type: Posts; User: IGEN93

Search: Search took 0.01 seconds.

  1. Replies
    0
    Views
    138

    [Jamming] XEROX C75, ERROR 077-123.

    Hello everyone, recently got this error on the xerox c75.
    Machine runs all simplex documents , but gives an error while printing on duplex. Error 077-123, after checking the code it says, reg....
  2. Thread: DC5000 ! Help

    by IGEN93
    Replies
    1
    Views
    161

    Re: DC5000 ! Help

    your RIP is not a match to your current model, that is the issue,i can provide you with EX5000 Fiery if you need . that will be the best solution .
    +91 98609 57551 whatsapp .
  3. Replies
    17
    Views
    11,639

    [Error Code] Re: Resetting 077-909

    please follow the nvm list with machine .

    enter all the nvm chain link with the default values listed in the list .
    to enter the values , you need to login into diagnostics mode of the machine ,...
  4. Replies
    0
    Views
    264

    how to set ESV in any xerox machine

    i have read this ESV (electro static value) of the machine in forum, to set the toner with different machines .

    please acknowledge me how to use or update these settings in any xerox brand machine.
  5. Replies
    2
    Views
    279

    Re: xerox 700 045-360

    primarily power on the machine without all the drum units present in the machine and check if the code appears .

    Generally 045-xxx codes are associated with ros units or flat ros cables, if the...
  6. Replies
    6
    Views
    365

    Re: Problem with Xerox DC252

    you need to blow the developer assembly clean it and then check for any thin marking on the magnetic roller , also rinse the developer with thin mesh to clean all the particals, if the problem is not...
  7. Replies
    5
    Views
    440

    Re: Xerox DC252 fault dfe-000 / 127-337

    generally 127-xxx codes are related with machines and fiery communication , primarily try booting up the machine independently without any fiery attachement , observe the machine, if the machine...
  8. Replies
    9
    Views
    538

    Re: Xerox WC 3655 Green Screen

    please share photo of the ess board with all components attached to it.
  9. Replies
    9
    Views
    538

    Re: Xerox WC 3655 Green Screen

    please try one by one for every componnet on the ess board, remove ram and then p/o , then again remove other componnent, the observe the machines behaviour , you will find the solution then and...
  10. Replies
    6
    Views
    359

    Re: Xerox altalink 8045 glass

    check for the improper belt operation and clean the optics mirror of the scanner carriage , if any contamination found, clean it and apply grease on the carriage slide.
    Make sure all the mirrors...
  11. [Jamming] Re: Xerox 4112 error 071-105 registration sensor on jam (tray 1)

    i have checked both the drawer connector and wirring harness with cable tester , all seems to be good.

    i hope there may be any nvm to override any sensor .
  12. [Jamming] Re: Xerox 4112 error 071-105 registration sensor on jam (tray 1)

    I have service manual , followed it but didn't got any solution . Checked every gear, motor and sensors .all are good , have cleaned the clutch with petrol , but still same result .
  13. [Jamming] Xerox 4112 error 071-105 registration sensor on jam (tray 1)

    I have been facing this problem immitantly , machine was working good , but after power up next day , machine xerox 4112 has started giving error of 071-105 for tray 1, 072-105 for tray 2, and...
  14. Replies
    8
    Views
    449

    Re: Xerox 550 error 077-909.

    Thanks for the solution, it worked , I found the missing nvm list from the machine and that nvm was listed in the list .

    Thanks for the solution .
  15. Replies
    2
    Views
    282

    Re: Xerox workcenter 5020 white lines printout

    Before checking any consumable , primarily check the paper feeding unit and paper for moisture, and also for fuser upper roller for any damage, if all are good , check for grid toner contamination .
  16. Replies
    8
    Views
    449

    Re: Xerox 550 error 077-909.

    i have already replaced fuser exit sensor, iot exit sensor, pre registration sensor.
  17. Replies
    8
    Views
    449

    Re: Xerox 550 error 077-909.

    Primarily there were multiple codes on machine , 124-338, 124-311, 116-320, 045-316, 10-320, 062-380/326, 077-909.

    I have cleared all errors and now stuck on 077-909,
    I have tried NVM reset,...
  18. Replies
    3
    Views
    238

    [Misc] Re: Fiery 100-01 system softwatre

    EFI - Download Registration - Support & Downloads
  19. Replies
    8
    Views
    449

    Xerox 550 error 077-909.

    The copier , makes both simplex and Duplex copies in black and white mode , but gives error while copying or printing in color mode .

    If anyone have faced this issue and has any suggestion would...
  20. Replies
    3
    Views
    238

    [Misc] Re: Fiery 100-01 system softwatre

    For which model you are using this fiery system ?
  21. Replies
    17
    Views
    11,639

    [Error Code] Re: Resetting 077-909

    I agree with Glenn, I have same error with 550, which prints in black and white mode but gives same error 077-909 , when copy command is given in color mode .
    I would like to have any suggestions if...
  22. Replies
    7
    Views
    10,682

    Re: Xerox WC 4112 061-320

    hi there i am facing saME PROBLEM for xerox 4112, please guide me for the broken wire you found in your machine
  23. Replies
    13
    Views
    3,428

    Re: Xerox PCUI issues

    Hi ,

    I am too getting the same error on xerox 1000 (error code - 102-316) it says
    PCUI not power on.

    Please post if any solution to this problem.
  24. Replies
    3
    Views
    5,303

    [Error Code] Re: wc 7435..err 061-370.. how to fix it?

    This error is related to lph head connectivity issue , please remove it and re assemble which would give you the resolution and if not resolved yet you have to check lph head by interchanging with...
Results 1 to 24 of 24