Search:

Type: Posts; User: Coptech

Page 1 of 19 1 2 3 4

Search: Search took 0.46 seconds.

  1. Replies
    17
    Views
    887

    Re: Fuser MP 3054SP Reset

    There was one code in color machine that needed fuse to get to "level 2 reset". I suppose this one could be the same but have not yet run across needing it. A good reason to hang on to fuses in case...
  2. Replies
    17
    Views
    887

    Re: Fuser MP 3054SP Reset

    No. it does not go where the jumper is. It goes on the other connector. If you check the service manual on replacing the fusing film, it tells you which pins and which connector it goes in. If you...
  3. Replies
    12
    Views
    1,923

    [Misc] Re: MP 305spf squeaking in the fuser.

    Not so much in the states...Use the series numbers more than series names.
  4. Replies
    12
    Views
    1,923

    [Misc] Re: MP 305spf squeaking in the fuser.

    Not used to the series names but the model that has been the claw squeaker in my experience is the little black and white 305+.If the thread was about the little color C305, I apologize.
  5. Replies
    12
    Views
    1,923

    [Misc] Re: MP 305spf squeaking in the fuser.

    usually just the claws squeaking. put a touch of silicon oil on the tips and it rarely comes back. Not so much oil that it goes on copies. Just enough to stop the squeak.
  6. Replies
    4,662
    Views
    919,987

    [Funny] Re: Joke of the Day

    Another dated joke that was Challenger related was what do NASA and a walrus have in common? Both are trying to find a good tight seal.
  7. Replies
    4,662
    Views
    919,987

    [Funny] Re: Joke of the Day

    This will give away my age but I remember when Delta airlines was crashing every time you turned around... My favorite joke at that time was Delta was offering a 25% discount on airfare if you...
  8. Replies
    14
    Views
    1,675

    Re: IS the mp305+ any good?

    In the training, it shows published life expectancy under 200K. They get put in places where people run much more than that on them.
  9. Replies
    4,662
    Views
    919,987

    [Funny] Re: Joke of the Day

    A Billionaire is dying and wants to try and see if he can take some money with him to the great beyond. He gathers his doctor, his priest, and his lawyer and gives them each a billion dollars to...
  10. Replies
    32
    Views
    2,911

    [Jamming] Re: Aficio MP5001 No feed jam

    A one way in the lever that rotates the reverse roller, One in the sep roller gear behind the torque limiter, and one in the black gear also on the drive. Feed assembly has two screws towards the...
  11. Replies
    32
    Views
    2,911

    [Jamming] Re: Aficio MP5001 No feed jam

    I assumed that you were a tech and had some experience servicing this copier. I am hesitant to give too much information as I can potentially cause you more harm than good if you start tearing your...
  12. Replies
    32
    Views
    2,911

    [Jamming] Re: Aficio MP5001 No feed jam

    Replace the feed rollers but you may also need to disassemble the feed units enough to clean the one-way bearings within them in different locations. There was an old bulletin about a longer bushing...
  13. Re: MPC3002 Can't do a printer automatic colour calibration

    It will only print test pages from tray one and also only if paper type is normal. Paper set to anything differently, and it will fail to print calibration pages.
  14. Re: MP4054 developer initialization when replacing entire PCDU?

    After you atart rebuilding the unit for exchange, Go into the end of the 3000 sp settings to manual new unit set and set all the appropriate items that have been replaced to a 1 before turning...
  15. Replies
    4
    Views
    518

    Re: C6500 black dots and color on all CMYK

    Looks like it is pulling developer to me...Can you feel the "grit"?
  16. Re: GBC Ultra Jam Code J149 I can not find it in manual or what it means.

    No J149 mentioned in VR52 service manual. Again, I would check the jam code in the main body service manual for whatever model it is attatched to.
  17. Re: GBC Ultra Jam Code J149 I can not find it in manual or what it means.

    It has been several years but I seem to recall the jams in the GBC accessories had a different prefix than the J that began the main body jams. If I am wrong, it wouldn't be the first time. What does...
  18. Replies
    3,363
    Views
    459,560

    Re: Let the truth be known

    Seems to me you got your order all wrong. I would let them chop the wood, dig the holes, fix dinner and the rest of it before shooting them. Don't do the shooting competition first!
  19. Replies
    3,363
    Views
    459,560

    Re: Let the truth be known

    Not to make light of anything but could not pass on the humor of this. An IUD is an intr-uterine device to prevent pregnancy. an IED is an Improvised Explosive Device... So which one blew up and...
  20. Re: Ricoh MP 501 / 4055 Classic Icons disappearing

    I think in the system settings, there is a reset SOP to factory defaults button that is way to easy to access that removes the classic applications. My bet is the IT dept is causing your issue not...
  21. Replies
    31
    Views
    4,624

    Re: 03 Models SP Mode access changed from default

    Go into factory mode and look at 5081. If I remember correctly, that is where the new code is set.
  22. Replies
    3,707
    Views
    4,844,288

    Re: Just how Crazy is Donald Trump!

    Apply that logic the other direction and pass a law that everybody has to buy a production print machine. If you have a small office and only want a desktop, you get fined for not buying a production...
  23. Replies
    3,707
    Views
    4,844,288

    Re: Just how Crazy is Donald Trump!

    We are never going to agree on this and that is OK. We had different experiences with the system. I never understood the reasoning behind my being penalized for not buying a product when I was not a...
  24. Replies
    3,707
    Views
    4,844,288

    Re: Just how Crazy is Donald Trump!

    Helping millions of Americans? That is a stat with no backup. There may be millions on the plan but that does not mean it benefits them. We made it therough our period of rolling the dice...Meanwhile...
  25. Replies
    3,707
    Views
    4,844,288

    Re: Just how Crazy is Donald Trump!

    Your entire list benefits the minority at the expense of the majority. The healthcare system is broken. The Health Insurance industry is also broken and criminal. Our legal system is badly broken but...
Results 1 to 25 of 468
Page 1 of 19 1 2 3 4