Search:

Type: Posts; User: wjurls

Page 1 of 8 1 2 3 4

Search: Search took 0.02 seconds.

  1. Replies
    1
    Views
    98

    Re: Bizhub 1060 error 4506

    I've had success with line items 1 through 3 below for the same issue only relating to yellow.


    Classification
    Main body: Writing correction and drive correction range exceedance
    Cause
    The...
  2. Thread: 2250P deletions

    by wjurls
    Replies
    10
    Views
    240

    Re: 2250P deletions

    Looks like humidity issues. Does the customer turn the machine off overnight?
  3. Thread: C-3906 Pro 1100

    by wjurls
    Replies
    9
    Views
    240

    Re: C-3906 Pro 1100

    Recheck the lower heater. Could be a bad filament that is losing connection once it heats up. It happens. If you remove the front fuser cover and cheat the door you should be able to see if the lamp...
  4. Replies
    2
    Views
    148

    Re: C2070 EF103 question?

    Try swapping the temp control harness (goes from the back of the upper connector to the upper thermistor connections. One is white, the other is blue) from the regular fuser to the EF-103 and see if...
  5. Replies
    15
    Views
    614

    Re: What's the scam?

    Interesting, I was just reading an article in Forbes the other day that said that the true measure of a man is his post count and rep points on an unmoderated web forum.

    I can only hope that once...
  6. Replies
    15
    Views
    614

    Re: What's the scam?

    Well congratulations. I don't care if you are 114 years old. Respect is something you earn, not something you are entitled to. If you are an asshole, you will neither earn, nor deserve, my respect...
  7. Replies
    15
    Views
    614

    Re: What's the scam?

    Because you came across as a condescending ass. "respect your elders"? Just how young am I pray tell?
  8. Replies
    15
    Views
    614

    Re: What's the scam?

    Thanks! That also makes sense.
  9. Replies
    15
    Views
    614

    Re: What's the scam?

    Not sure what your deal is dude. You come off all kinds of condescending to me in your first post which is why I responded the way I did. I even mention in my reply how your explanation indeed makes...
  10. Replies
    15
    Views
    614

    Re: What's the scam?

    I'm pretty sure I made it clear in my original post that I know it's clearly a scam. I'm really not a gullible idiot. Not all Californians are morons (just most). I was just wondering what exactly IS...
  11. Replies
    6
    Views
    207

    Re: C7000 with magenta covered prints

    Here is the bulletin. The new style cable has a metallic end and the old style is all gray plastic.

    49693
  12. Replies
    6
    Views
    207

    Re: C7000 with magenta covered prints

    Check and see if you have the old style Fiery cable. There is a bulletin about the cables causing erratic imagining. If you can run a internal test page without the magenta background it's likely the...
  13. Replies
    15
    Views
    614

    Re: What's the scam?

    I have no idea why the end of that message turns green???
  14. Replies
    15
    Views
    614

    What's the scam?

    Every so often I get an email to my business page requesting pricing on a laundry list of items. Usually it's a plethora of HP cartridges. I got the email below today but apparently they forgot to...
  15. Replies
    4
    Views
    239

    Re: Error Code C-2411 Bizhub C-6500

    Were the developing units vacuumed by chance? TCR sensors are static sensitive.
  16. Re: 1st page colour, other pages mono, possible?

    That's how I print my 2 part NCR service tickets. I just duplicated page one in monochrome to make a page 2 using word. When I go to print, it prints as a 2 page document but the front white copy is...
  17. Replies
    3
    Views
    247

    Re: C1070 C2070 FUSER

    You can probably pick up a EF-103 (envelope fuser) on the cheap and swap the harness for the upper temp sensor connector with the damaged unit and you'll be back in business.
  18. Replies
    12
    Views
    438

    Re: Bizhub Press C7000 2nd transfer drop out.

    The winner is.... Toxic! Total rookie oversight on my part. Upon closer observation this morning I found the lift gearing for the 2nd trans roller to have a dead spot. Ordering new motor and gears.
    ...
  19. Replies
    12
    Views
    438

    Re: Bizhub Press C7000 2nd transfer drop out.

    The image dropout will be generally in the same place but might fluctuate around by about 10 mm or so. I have the same hesitation on the HV2 being issue due to it not being sporadic.
    Good tip on...
  20. Replies
    12
    Views
    438

    Re: Bizhub Press C7000 2nd transfer drop out.

    Thanks, Had customer change from auto to low pressure and same result. Might have to try replacing the HV2 board.
  21. Replies
    12
    Views
    438

    Re: Bizhub Press C7000 2nd transfer drop out.

    Door doesn't seem to be an issue. I was thinking HV unit but the fact that it's always in the same area has me thinking a mechanical issue??
  22. Replies
    12
    Views
    438

    Bizhub Press C7000 2nd transfer drop out.

    Hey guys, having trouble with a C7000 with a sudden onset, and consistent issue with the 2nd transfer. On plain 11x17 the image is complete but the overall transfer appears poor.
    49540

    With heavy...
  23. Replies
    14
    Views
    1,804

    Re: Konica Plotters?

    I've got a number of HP Designjet Customers out there and have found units like the T-730's pretty easy to work on. Parts and service manuals are also readily available. Like all inkjet, they need to...
  24. Replies
    3
    Views
    248

    Re: Xante Impressia Fuser

    Those turkeys!! Thanks for the feedback Phil.
  25. Replies
    3
    Views
    248

    Xante Impressia Fuser

    Does anyone know if the Ricoh SPC820DN Fuser will work in the Xante Impressia without any modifications?


    Thanks

    Lee
Results 1 to 25 of 178
Page 1 of 8 1 2 3 4