Search:

Type: Posts; User: JayPaul

Page 1 of 4 1 2 3 4

Search: Search took 0.10 seconds.

  1. Replies
    21
    Views
    1,982

    Re: FTP not working

    I just need to know how you go further than 1 subfolder, what the path would be?
    Server: 192.168.1.200
    Path: Docs/user1 or Docs\user1 or something else. Because these don't work. Or would it be......
  2. Replies
    21
    Views
    1,982

    Re: FTP not working

    Doesn't that just show you the full path if it were in SMB format? FTP doesn't seem to have the normal \\DesktopPC\Folder1\Scans
  3. Replies
    21
    Views
    1,982

    Re: FTP not working

    My dance of joy and smug swagger waqs cut very short as I remoted into my customers network earlier, adjusted the path, got them to send a scan and it didn't come through!! I still had 2 copiers in...
  4. Replies
    21
    Views
    1,982

    Re: FTP not working

    I'll tell you what... that guide helped me in the end, from my last edited post I said I would set the path to the folder without \ or / before it... it worked!
    I noticed as well the folder name was...
  5. Replies
    21
    Views
    1,982

    Re: FTP not working

    I used IIS for FTP on my office PC and for the customer going to their server I used filezilla client to check and see if files were going through.
    What I found in the end is, from both copiers I...
  6. Thread: Ricoh MP 2501L

    by JayPaul
    Replies
    13
    Views
    773

    Re: Ricoh MP 2501L

    Is this like the old MP 161LN models?
    I know on there you have to setup lpr printing port in the driver and use lp as the name... been about 7 years since I did this so I'm struggling to remember
  7. Replies
    21
    Views
    1,982

    Re: FTP not working

    Ok so further progression now...
    I am using my PC with the IIS enabled... actually got it working. The IMC 2500 cannot scan to it, BUT I also just setup an old MPC 4501 exactly the same and it can...
  8. Replies
    21
    Views
    1,982

    Re: FTP not working

    I also just setup my Office PC as FTP Server, so I have control over everything and I know every detail is correct and everything is shared fully. Same thing again, it connects ok but can't send to...
  9. Replies
    21
    Views
    1,982

    FTP not working

    Hi all, I have always been a Scan to Folder guy. Never used FTP in my life and never had to. Until now...
    I have 1 customer, their IT guys refuse scan to folder and setup all their clients with FTP...
  10. Replies
    13
    Views
    979

    Re: Toner going from 40% to Empty instantly

    Will changing the toner low threshold help me though? Because that is basically a notification to say toner low at whatever % you set but the machine will know it still has eg 35% left in it and our...
  11. Replies
    13
    Views
    979

    Re: Toner going from 40% to Empty instantly

    So based on your information Zed, coupled with the fact it pretty much only happens to the mpc 307 type machine. Maybe this machine either has a standard fault of toner being too dense from factory...
  12. Replies
    13
    Views
    979

    Re: Toner going from 40% to Empty instantly

    It runs on a multiple scan system, so for consumables it scans every 60 minutes, it scans once a day at 10am to see if there are any new machines on the network (if you set it to scan a whole ip...
  13. Replies
    13
    Views
    979

    Re: Toner going from 40% to Empty instantly

    Is there a guide somewhere or bulletin about this? Can't really say i've seen much about it other than the occasional mention in threads on here. Just one of those things i've never needed and never...
  14. Replies
    13
    Views
    979

    Re: Toner going from 40% to Empty instantly

    Yes only and always genuine toner from Ricoh.
    I think that near end threshold is designed for @remote isn't it? We used to change thresholds for toners when we used it a few years back.
    This auto...
  15. Replies
    13
    Views
    979

    Toner going from 40% to Empty instantly

    Hi all,
    This has been a problem for a while in my company now. Many of the MPC 307 machines and some of their close relatives 306/406 etc have toner problems. We don't use @remote anymore we use...
  16. [Misc] Re: Ricoh MP 401 firmware update to eliminate black lines and occasional white lines?

    We have a load of MP 402s out in the field which I assume is basically the same as a MP 401. They take the same drum, in England the part has been updated again to M906 0136. I have been told to look...
  17. Replies
    13
    Views
    1,698

    Re: Ricoh Engineer required in South of England

    Plus mileage goes down to 25p after 10k miles here so you would do good for a little while then suddenly money would go downhill. Plus thanks to being a solo engineer for 2 months earlier this year...
  18. Replies
    13
    Views
    1,698

    Re: Ricoh Engineer required in South of England

    Sorry but position was filled about 4 months ago, good luck with your searches everyone
  19. Replies
    6
    Views
    400

    Re: MP C4502 , error sc995-01

    Usually an engineer would post -
    What may have happened to the machine
    The SC code or fault
    What they have done to try and resolve it (important)
    Then they post in here for ideas
    Your post would...
  20. Replies
    7
    Views
    482

    Re: MP C401SR Sc502-00

    As it is PB1000 (only 1 tray) is it just sat on a cabinet with only 2 trays total? Try cheating it if you can without putting the tray in and see if the lift motor moves or not. If not then probably...
  21. Replies
    10
    Views
    475

    Re: MP C305's replacement recomendations?

    Everyone loved them when they first came out, small multi function colour machine. Then like every model a year later you see all the flaws... fuser gears turning to dust after 25k, toner board not...
  22. Thread: New Model IM

    by JayPaul
    Replies
    50
    Views
    5,551

    Re: New Model IM

    This is weird just quoting myself but just so it shows a bit of context. Went to this call this morning, typical they were actually having a meeting around the copier so cheating the door and using...
  23. Re: Auto Specify Folder Destination (MP 301SPF)

    I could be wrong here but I'm pretty sure that can't be done. After 60 seconds it will auto reset and 'unselect' her scan destination anyway. A time which you could adjust but I think it will still...
  24. Replies
    12
    Views
    874

    Re: Wiping Hard Drives

    Nothing I am aware of. No SD cards in machine, it had fax but that board was removed the whole time during all of this. Now as it won't boot up I can't be 100% sure as I can't check but top 90's
  25. Replies
    12
    Views
    874

    Re: Wiping Hard Drives

    Ok so finally got the laptop to see it, only works with usb 2.0 now which is annoying but oh well. Sorted the HDD out in Disk management after checking it over with Mini tool partition wizard first....
Results 1 to 25 of 98
Page 1 of 4 1 2 3 4