Search:

Type: Posts; User: tee

Page 1 of 3 1 2 3

Search: Search took 0.02 seconds.

  1. Re: MX5111N Copy quality automatically adjusting after every copy

    I have seen this on the older models when they need all drums and developers
    replaced and calibrated. Other times it has been the primary belt sensors needing
    a good cleaning.
  2. Replies
    7
    Views
    541

    Re: FS-4100DN Casette 1 Lift Issues

    I have had this fight many times.
    Check the roller assy and make sure it is not forced all the way to the top
    I also had a bushing slip off the feed drive shaft.
    Yes the gear breaks, but u can...
  3. Replies
    17
    Views
    1,057

    Re: KM-3252ci black only banding issue crossfeed

    I would make sure that the secondary transfer roller isn't the source of
    the high voltage crossover. It has been the source of problems like this for me.
    Kyocera thinks developer gets into the 2nd ...
  4. Thread: kyocera 5053ci

    by tee
    Replies
    9
    Views
    604

    Re: kyocera 5053ci

    I fixed it by reconnecting and cleaning all high voltage connections.
  5. Thread: kyocera 5053ci

    by tee
    Replies
    9
    Views
    604

    Re: kyocera 5053ci

    70k
    drums swapping changed nothing
  6. Thread: kyocera 5053ci

    by tee
    Replies
    9
    Views
    604

    kyocera 5053ci

    I replaced the magenta dv unit and recalibrated.
    prints and copies both have magenta distortions.
    I am trying a primary belt next, anybody have a
    Taskalfa 5053ci with images like these samples?
  7. Thread: 4002i background

    by tee
    Replies
    19
    Views
    4,230

    Re: 4002i background

    I saw this once on 6002i and it was the scanner lock position was in the shipping mode.
    I couldn't believe it till I took it out of shipping mode .
    Some installer screwed me.
  8. Re: MX-2610 color lines only in heave coverage areas

    I have seen this on this model before and every time it was
    the primary belt cleaning blade.
  9. Thread: Pros Elite 100

    by tee
    Replies
    3
    Views
    3,461

    Pros Elite 100

    Just checking to see if Pros Elite is good for techs or NOT.
    Has anyone been using this in their company?
    If so , how is it working out ?
  10. [Error Code] Re: kyocera taskalfa 3011 shows replace toner cartridge

    I this before and there was a jam inside.
  11. Replies
    11
    Views
    2,563

    [Dead] Re: Kyocera FS-C8520 Wierd Problem

    I would try installing the print monitor on a computer and
    see if it is out of toner,paper, jammed up,pm time or other error.
    Since you can't get in service mode, this should tell you if it is...
  12. Replies
    1
    Views
    627

    [Jamming] Re: Sharp MXM264N duplex jam A4

    check the drum unit separator pawls and wheels.
    I had one folding corners yesterday and I just removed the culprit
    and everything started working right again.
  13. [Misc] Re: MX-C300W : What is the current Firmware Version~MCU BOOT/MAIN ?

    It's 300
  14. Replies
    2
    Views
    924

    [CQ] KIP 7170 toner dusting

    Every week this blows toner onto the LED and charge corona.
    KIP says this model does this, I would like to fix it from toner dusting.
    Any ideas will help.
  15. Replies
    4
    Views
    1,580

    [Error Code] Re: MX3610 L4-06 error code

    I was testing a machine yesterday, I unplugged the drive clutch on the main
    drive unit and that code popped up.
  16. [CQ] Re: MX 3100 Prints color great from glass. From PC colors washed out

    I recently had one of these go light and it was the secondary transfer unit.
    Your problem could be dv units or high voltage problem. Try sim 7
    dv disable. It might help diagnose.
  17. Replies
    6
    Views
    1,281

    Re: Sharp ARM 257/ U2-40

    [QUOTE=cucuklotz;712455]Hi
    THe code flippped from a U2-40 to a F2-02, I replaced Toner with another new OEM Toner. Same thing.
    Connector in back is seated ok and clean.When I put into SIM...
  18. Thread: photo sensors

    by tee
    Replies
    2
    Views
    765

    [Jamming] Re: photo sensors

    I think this is the bulletin you are looking for.
  19. Thread: Lines on prints

    by tee
    Replies
    2
    Views
    663

    Re: Lines on prints

    I have seen this a few times.
    It is the waste toner drive assembly gears failing.
    PARTS PIPE TRANSFER CLEANING ASSY SP (302K09404_)
  20. Replies
    11
    Views
    6,244

    Re: 3252ci memory light blinks

    yes, laptop works every time with no memory flashing
  21. Replies
    11
    Views
    6,244

    Re: 3252ci memory light blinks

    The problem here is that Calgary, Alberta has to get the mac address and assign an ip.
    The 5052ci we took and had the same symptoms was just plugged into the
    network and didn't get the ip address...
  22. Replies
    11
    Views
    6,244

    3252ci memory light blinks

    We installed this to replace a Taskalfa 3051ci . The old unit never had a call.
    We replaced main pwb, HDD, and fax board. The memory blinks after we plug in the LAN.
    There is no internet access....
  23. Thread: F2-64 MX-M503n

    by tee
    Replies
    8
    Views
    5,063

    [Error Code] Re: F2-64 MX-M503n

    I would turn on dv check disable in
    simulation 7-1. Then check for a ready position.
    Run a copy and check if dv unit or toner is bad.
  24. Thread: MX2610 lines

    by tee
    Replies
    6
    Views
    680

    Re: MX2610 lines

    I reconnected all board, connectors, and memory. Everything is fine now.
  25. Thread: MX2610 lines

    by tee
    Replies
    6
    Views
    680

    MX2610 lines

    I changed the magenta developer and primary belt. The lines are on copies and prints intermittently.
    I also cleaned the laser mirrors. Unit is in a dirty factory. I did 25-2 for magenta,
    then 44-2...
Results 1 to 25 of 53
Page 1 of 3 1 2 3