Search:

Type: Posts; User: Pulsara

Search: Search took 0.01 seconds.

  1. Thread: Ricoh mp201

    by Pulsara
    Replies
    9
    Views
    262

    Re: Ricoh mp201

    Question doesn't mention whether there are any indications like paper jam sign, after the first copy came. Or just take another copy by pressing start key, without open/close any cover. If so,...
  2. Replies
    10
    Views
    464

    Re: Ricoh Mp2501 ( Too light copy problem

    Unlike old MP 2000 model this machine comes with plastic support for scanner unit on the left hand side, so the possibility of scanner bend is less.(It can happen if someone removed it willfully)...
  3. Replies
    14
    Views
    912

    [Electrical] Re: Machine cannot power ON

    Check whether power code on the backside properly fit. I had same thing with my customer.
  4. Replies
    7
    Views
    422

    MPC 3350 printing issue

    Hi all, one of my customers has been using a MP3350 copier/printer, driven by PCL6 drivers (in a networked environment) with Windows versions 7 & 8 for more than a year without any trouble. Recently...
  5. Replies
    8
    Views
    1,110

    Re: RICOH MP 2501SP - URGENT .

    Try this way, Set transfer roller current adjustments you have done to defaults. remove toner supply unit. take some sky shot copies until you get good copy without dark back side. then reinitilize...
  6. Thread: Ricoh MP 2501L

    by Pulsara
    Replies
    13
    Views
    1,470

    Re: Ricoh MP 2501L

    There's no SP number like 5-985. but MP 2501SP has. I can do network printing. I think port is already enabled. seems no facility for SMB scaning.
  7. Thread: Ricoh MP 2501L

    by Pulsara
    Replies
    13
    Views
    1,470

    Re: Ricoh MP 2501L

    this network still allowed SMB1. other copiers like MP2501SP, MP 3350 working perfectly with SMB scanning in this network. I think this is a basic macine with only network printing. no SD card HDD...
  8. Thread: Ricoh MP 2501L

    by Pulsara
    Replies
    13
    Views
    1,470

    Re: Ricoh MP 2501L

    You are correct I think. this machine doesn't have anything like HDD,SD card. only a simple card with network port fitted to the MB. only facility it has network printing & USB print/scan.
  9. Thread: Ricoh MP 2501L

    by Pulsara
    Replies
    13
    Views
    1,470

    Ricoh MP 2501L

    Hi friends I have MP2501L copier with network connection. Unlike MP2501SP copier it doesn't have full detailed web image monitor & I can only enter IP address. also cannot setup to smb scanning &...
  10. Replies
    4
    Views
    386

    SC 819 code on MPC 2050 copier

    Hi Friends I'm having MPC 2050 copier working perfectly in the past period. Now Sc 819 code appear repeatedly. Any advice greatly appreciated.
  11. Replies
    3
    Views
    1,575

    Re: MP 2851 error code SC 551

    Sometimes when heated up thermistors will bend outwards & lose contact with heater roller. check whether it properly contact with roller or try to remove it out & bend inward slightly 7 put it back....
  12. Re: MP2851 prints are fine but scans (platen or adf) are parallelograms

    I think you should readjust 1st & 2nd scanner with rods to check whether any alignment error in vertical direction.
  13. Replies
    9
    Views
    958

    Re: PCU type 1027 Cleaning entrance seal

    We have bought cleaning unit seals some years ago from Katun that manufactured for older Ricoh models Like FT 4422. It comes with double sided tape & we can cut it to exact size & use for AF 1027, MP...
  14. Thread: Ricoh MP 4500

    by Pulsara
    Replies
    2
    Views
    544

    Ricoh MP 4500

    Hi all, I have Ricoh MP 4500 copier with this kind of fault. paper is feeding but it will jam at fusing exit section. found that photo sensor on right cover malfunctioned. when I replaced new...
  15. Replies
    1
    Views
    899

    MP 201SPF fusing overheat (SC 543)

    Hi friends, I have using MP 201SPF copiers for printing ,copying & scanning. Recently two machines stuck with SC 543 code within a month. Apparently nothing wrong with heater, pressure rollers &...
  16. Replies
    8
    Views
    1,371

    Re: Ricoh MP 2000L SMB scanning

    After firmware update, I tried scanning with SMB 1 enabled. Scanner works normally. When SMB 1 disabled, it stopped working.I mean the device still use SMB 1 for communicating. Done these things with...
  17. Replies
    8
    Views
    1,371

    Re: Ricoh MP 2000L SMB scanning

    Thanks for the advice. I already updated firmware B8675526K, v6.19 but copier still respond only to SMB 1. Is there any update issued after that.
  18. Replies
    8
    Views
    1,371

    Ricoh MP 2000L SMB scanning

    Hi friends, One of my customer using windows 7 with Ricoh MP 2000L copier for SMB scanning. Recently they updated their computer security to defend from Ransomeware. Now they cannot do scan to...
  19. Thread: Prcoh MP 1500

    by Pulsara
    Replies
    2
    Views
    397

    [Electrical] Re: Prcoh MP 1500

    This machine doesn't have HDD, also we have no option to replace whole machine at this moment. so I tried further to check the reason for this issue. In a good working machine, when power switch...
  20. Replies
    6
    Views
    735

    RICOH MP 4500 light copies

    Hi friends! one of RICOH MP 4500 copier I'm servicing having an issue like this.Printouts & counter copies are very good. but photo copies & scanned images are very light. I have done drum,...
  21. Thread: Prcoh MP 1500

    by Pulsara
    Replies
    2
    Views
    397

    [Electrical] Prcoh MP 1500

    HI! I'm having startup delay of my MP 1500 copier, which sometimes takes 30 mins or 1 hour to initialize. after that machine working as normal. highly appreciated anybody have solution to correct...
Results 1 to 21 of 21