Search:

Type: Posts; User: M94

Page 1 of 3 1 2 3

Search: Search took 0.10 seconds.

  1. Replies
    3
    Views
    112

    Re: KFS register problems

    Yeah it's unfortunate but probably something that should have been checked before it was sold\purchased. He's right it's pretty unlikely they Kyocera could do it from their end, that would definitely...
  2. Replies
    3
    Views
    128

    Re: Blank copy on Canon IR Adv 6075

    ^This^
    A multimeter could make sure that you aren't chasing your tail
  3. [Misc] Re: XM 7155 Control panel printing on it's own and then Non responsive...

    Seconded, sounds like every damaged touchscreen I've ever encountered (on cell phones mostly but still) might try weird pressure in weird places on the panel while someone prints to see if you can...
  4. Replies
    3
    Views
    128

    Re: Blank copy on Canon IR Adv 6075

    I know you said they are new but out of the box failures aren't impossible, if there's nothing making it to the drum that really leans towards it not charging correctly.

    Edit> Wait is it ONLY on...
  5. Replies
    15
    Views
    447

    Re: 458e shuts down during job

    I'm co-signing the co-sign, check if there are other devices on the same circuit that could be drawing enough to dip the overall power below what the copier needs. Things with pumps or motors that...
  6. Re: Kyocera TA-3551ci showing memory full when scanning

    That is the max so yeah I think I'm gonna have to agree with the rest of the thread, only option is to reduce data amount one way or the other. Reducing quality seems like the most straightforward...
  7. Replies
    16
    Views
    393

    Re: How to fire a customer?

    I would log time involvement and show it to the customer after a couple weeks, point out exactly how much time is being spent trying to help. Tell him that your business cannot sustain numbers like...
  8. Re: Kyocera TA-3551ci showing memory full when scanning

    Is the memory full message implying the memory on the printer? It sounds like it might be RAM getting overwhelmed and you may just be able to add a couple cheap chips to alleviate the issue.
  9. Replies
    16
    Views
    393

    Re: How to fire a customer?

    Be firm and direct, don't beat around the bush and leave room for interpretation. I would maybe consider starting as an increase in charge amount, make it worth your time. That way if they aren't...
  10. Replies
    0
    Views
    71

    Epson Scan Confusion

    So I don't have much in the way of actual details just yet but I'm going to give you guys the short version to see if you guys have ever encountered anything like this. The long story short is that...
  11. Thread: MSConnector Setup

    by M94
    Replies
    19
    Views
    845

    Re: MSConnector Setup

    Must be a time limit on edits otherwise I would have just added to my last post. Just wanted to mention that Access Lock does not get past the problem, it just auto enables that setting. So it's not...
  12. Thread: MSConnector Setup

    by M94
    Replies
    19
    Views
    845

    Re: MSConnector Setup

    Alright guys I got it, on the machine you need to go into the user\job accounting settings. Then there is a setting for 'Unknown job ID' which needs changed from reject to permit. After that it seems...
  13. Replies
    9
    Views
    250

    Re: Riso RZ - Paper wrapped around drum

    I'm gonna second Phil on telling you to find a manual before anything else bud. I'm not familiar with that particular machine so I don't have much direct info, but if you really intend to tear it...
  14. [Misc] Re: Kyocera FS-C5100DN to use genuine or generic toner?

    I've never seen it disclosed either. Just a tip of the trade manufacturers fail to mention I guess, but yeah most if not all printers only come with 30-50% of a full toner out of the box.

    Edit-...
  15. [Misc] Re: Kyocera FS-C5100DN to use genuine or generic toner?

    I would really make the decision based on how long you intend to keep running the machine. In the long run generic will likely give more issues. But if they are basically ready to replace the thing...
  16. Replies
    27
    Views
    1,409

    Re: Latest Firmware for Kyocera TaskAlfa 3551ci

    Dude, seriously.

    Edit> I'm not gonna feed into this any further.
  17. Replies
    27
    Views
    1,409

    Re: Latest Firmware for Kyocera TaskAlfa 3551ci

    Alright I was gonna stay out of it but seriously man. Read the rant again, he makes it pretty clear where his lines are drawn. Second, this isn't in rants and raves so keep your political distaste...
  18. Re: KMBH C3350 wont send out email nor hook up to pc

    I can't tell if you found a solution but didn't say (please do it helps us newbies cruising for info) or if the 'solution' was that the c3350 isn't capable of smb3. If you wouldn't mind clarifying I...
  19. Replies
    27
    Views
    1,409

    Re: Latest Firmware for Kyocera TaskAlfa 3551ci

    I'll PM you.
  20. Thread: MSConnector Setup

    by M94
    Replies
    19
    Views
    845

    Re: MSConnector Setup

    Luckily this printer is my personal training tinker toy, so no customer to annoy with this stuff. I'm just playing with it to make sure I know the ins and outs of the various involved setups. Now...
  21. Thread: Taskalfa 3500i

    by M94
    Replies
    5
    Views
    439

    Re: Taskalfa 3500i

    You say after startup, does that mean you see the panel light up during startup? Like the Taskalfa logo while booting but then it goes black? Or just nothing from the start? Can you hear the rest of...
  22. Replies
    4
    Views
    167

    [Error Code] Re: F050 Kyocera fs 2000d

    If you're having issues getting USB to work try formatting with a utility other than windows built in disk management. The TASKalfa I've been playing with definitely won't recognize flash devices...
  23. Replies
    2
    Views
    190

    [Error Code] Re: Kyocera P-3520 MFP cf010

    Other than that you could look around with a multimeter and maybe pinpoint something on the board to replace if your comfortable with that type of repair. But the people writing those manuals don't...
  24. Thread: MSConnector Setup

    by M94
    Replies
    19
    Views
    845

    Re: MSConnector Setup [SOLVED]

    Thanks for the insight, I was using the 'Admin' and 'Device Admin' accounts although I'm fairly sure they had most if not all the same printing rights as other random users. Now that you say it...
  25. Thread: MSConnector Setup

    by M94
    Replies
    19
    Views
    845

    Re: MSConnector Setup [SOLVED]

    Alright so even though it doesn't make a ton of sense in my head I did figure out the issue. The printer also had local authentication setup and somehow this was preventing the print job. I'm still...
Results 1 to 25 of 64
Page 1 of 3 1 2 3