Search:

Type: Posts; User: blackcat4866

Page 1 of 20 1 2 3 4

Search: Search took 0.15 seconds.

  1. Replies
    14
    Views
    2,389

    Re: Disable print view?

    Am I correct in concluding that it is not a fault of the forum itself, but its a function of the web browser that I'm using?
    =^..^=
  2. Re: C450i Output Tray Stacking issue / annoyance

    This is a hygrometer:

    47109

    It's not that expensive and will definitively tell you if the environment in your office is affecting the paper. We'd like to see that humidity between 25% and 37%....
  3. Replies
    26
    Views
    770

    Re: Upside down on duplex

    It only matters if you're trying to use Private Print or Job Accounting. The encryption password for each of the models is different. Otherwise it should work. =^..^=
  4. Re: Konica Minolta c308 - stuck in self diagnostic mode

    You can get this exact symptom if you update the firmware, but do not change the DIPSW in the bulletin. =^..^=
  5. Replies
    3
    Views
    420

    Re: 2508 password

    Yes. The manual covers that quite nicely. =^..^=
  6. Replies
    4
    Views
    180

    Re: C659 charge rollers

    Konica charge rollers typically make life ... just make life. =^..^=
  7. Replies
    26
    Views
    901

    Re: Kyocra 3252ci line on drum

    The color machines are all dual component. Only the older monochrome MFPs and the monochrome printers are still monocomponent.
  8. Replies
    7
    Views
    379

    [Misc] Re: Toshiba 5055C

    I always start with control + F ... and got nothing. So you're off the hook this time.

    Congratulations on your success!
    =^..^=
  9. Replies
    26
    Views
    901

    Re: Kyocra 3252ci line on drum

    This is one of those cases where only you can make the observations.

    Clearly something is touching the drum, and the only way to tell what is to get your eyes in the machine to see what. There are...
  10. Replies
    26
    Views
    770

    Re: Upside down on duplex

    I'm going to guess that somebody changed the default along the way. =^..^=
  11. Replies
    26
    Views
    901

    Re: Kyocra 3252ci line on drum

    Your photos are probably too big. There are size limitations ~1MB. When I got my new phone I changed the settings so that default resolution was lower..

    Is there any reason you attached a 6230...
  12. Replies
    6
    Views
    134

    Re: Changing my Avitar

    I believe that there are two avatars: The one that displays in the forums and the one that appears in your profile. And yes, there are size limitations and file type limitations.

    Note under...
  13. Re: Kyocera FS-1135 mfp - Can't scan to folder

    Hmmm.

    So they dropped this machine off at your office. And mentioned that it can't scan to folder. You do realize that you cannot test scan to folder if the recipient PC and folder are not...
  14. Replies
    7
    Views
    379

    [Misc] Re: Toshiba 5055C

    You can see it on pages 137, 141, 142, and 163 of the service manual.

    Independence and doing your own manual reading is highly prized here. Though, to be completely fair, It's not ever named or...
  15. Re: Frequent problem with Ecosys P2040dn/M2040dn

    We've discussed re-coating the teflon sheet with some of that OIL-965 that comes with the Toshiba e Studio 4555C/4505C fuser rebuild kits. It's a very similar construction. The two fusers I...
  16. Replies
    17
    Views
    479

    Re: Starting up IP message

    That's what I was reading for: Duplicate IP!
    Take the MFP off the network, then ping the address. If something answers it's not your MFP. =^..^=
  17. Re: Copystar CS2050 Getting faded copy on right side of page on flat bed

    Actually, the document feeders really suck, too. =^..^=
  18. Replies
    11
    Views
    538

    Re: FS533 Gripper on one side only

    Something lost in the translation: Are we talking about the stapler? =^..^=
  19. Replies
    7
    Views
    326

    Re: Toshiba 456 tray 1 and 2 jams

    The registration flags will fix this. Flattened separation roller can also contribute. =^..^=
  20. Replies
    2
    Views
    181

    Re: Quick Drum question

    I haven't tried it, but if the gears were successfully swapped it could work. The size is correct. =^..^=
  21. Re: Copystar CS2050 Getting faded copy on right side of page on flat bed

    It's extremely common on this series to get a buildup of whiteish ozone haze on the underside of the slit glass, and to a lesser extent on mirrors #1, #2, #3. (7 months to 3 years since last...
  22. Re: Pattern on prints shows up on black C454e

    Please measure: What interval on the pattern in millimeters? =^..^=
  23. Thread: HI

    by blackcat4866
    Replies
    7
    Views
    170

    Re: HI

    Welcome! =^..^=
  24. Re: A4 recognition from glass bizhub c284e

    hmmm.

    I couldn't find the reference, but I did find this:

    bizhub C224e, C284e, C364e, Zeus3MLK/ 2MLK/ 1MLK

    "Original left on the glass." message when using DF. Off the glass LTR original...
  25. Replies
    7
    Views
    326

    Re: Toshiba 456 tray 1 and 2 jams

    EDIT: That's supposed to read: ... size mismatch E061, E062, E063, E064, E065.

    I had a dislexic moment. =^..^=
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4