Search:

Type: Posts; User: methogod

Page 1 of 20 1 2 3 4

Search: Search took 0.09 seconds.

  1. Production Guys, anyone have any details on the Acurio c14000

    I hear they have been getting ready to release, wanted to know specs. We have been in the market waiting for a repo full boat c6100 or c6085, but now may wait...
  2. Replies
    3
    Views
    171

    Re: Bizhub C6500 - Light stripes only on CMY

    Do that test on 11x17 or 12x18, measure the repeat distance in CM/MM... then i can tell you.
  3. Replies
    4
    Views
    237

    Re: Bizhub 13x19 ?

    All the production color machines... C6501, C7000, C1070....C3080, C8000, C1100
  4. Konica Bizhub 920 LOT (6 machines, 2 like new, tons of supplies)

    This is my entire supply of Konica BH 920 machines, parts and consumables.
    Best offer gets it all, will work with you on shipping or exporting....

    We have no problem keeping these going for...
  5. Replies
    6
    Views
    656

    Re: Accuriopress c3070

    if your buying new no reason not to get the fiery, especially with the large page size support. Also PPML (external fiery not the bustled).

    I get stuck with konica rips on B&W machines and wish i...
  6. Thread: SD-506

    by methogod
    Replies
    3
    Views
    162

    Re: SD-506

    just took a look further... looks like the right part is A0H2B62201

    Only look at destination variations...

    what is the difference between A0H2WY2 and A0H2WY1?
  7. Thread: SD-506

    by methogod
    Replies
    3
    Views
    162

    Re: SD-506

    The PDF you sent me has the same "trimmer board" that came from konica (15AN52822F)
    The newer version? or Older Version...

    Tried to swap the cutting material, from new PLATE to my current, and...
  8. Thread: SD-506

    by methogod
    Replies
    3
    Views
    162

    SD-506

    My old beater C6501 needed a new pressing plate, ordered part number 15AN52822F (Pressing plate) and its not the same, much different.... has a pin on it... looks like all the parts books... is...
  9. Replies
    8
    Views
    292

    Re: Bizhub C7000 wrinkling paper.

    check your fuser is locked in....

    also check bottom of transfer belt is level, as well as bearing is lower transfer roller...

    had this in c6501....
  10. Thread: PK 505

    by methogod
    Replies
    0
    Views
    101

    PK 505

    Any one have a used working PK-505 punch unit?
  11. Replies
    6
    Views
    656

    Re: Accuriopress c3070

    same drums same DV, life is 80% or so on the 70 ppm vs the 80 ppm.
  12. Replies
    6
    Views
    656

    Re: Accuriopress c3070

    C3070 and C3080 are the new models... The C3070L is usually a base model... or LIGHT duty IMHO.

    if you spending real money C3080 is the way to go, if your real production may even be better off...
  13. Thread: Oki B4600

    by methogod
    Replies
    1
    Views
    329

    Re: Oki B4600

    ebay all day, low ball till you find one cheap...
  14. Replies
    5
    Views
    625

    [CQ] Re: Oki c9655 colour misregistration

    prob forced the wrong drums into basket, and skewed it. Seen it before... dont it once at my shop years ago. 3640 drums do not work in the 3641/9650 newer boxes... there a hair longer.
  15. Replies
    1
    Views
    239

    Re: Wanted Fiery IC-308 for Konica 5501/6501

    sent you a private message....
  16. Replies
    3
    Views
    485

    Re: Accurio C6085 print quality issues

    photos of prints? on long sheets as well as 12x18 or 11x17. looking for repeater marks...

    life of consumables?
  17. Replies
    12
    Views
    926

    [Misc] Re: Bizhub C451 - Paper curling

    does it happen simple as well as duplex? seen that when the duplex is dirty...
  18. Replies
    25
    Views
    1,667

    [Misc] Re: C6501 yellow lines and scratches on drums...

    where are you buying drums? what are the dates on the failing drums...
  19. Replies
    25
    Views
    1,667

    [Misc] Re: C6501 yellow lines and scratches on drums...

    DU102 drums only.

    do not use DU104.

    make sure your removing the red screws from the drums when replacing.

    what is meter/life of DV unit? DV?
  20. Re: KM 6500 with Heavy Duty Booklet Maker (9x12) in any Drawer...

    again we run a C6501 still for non color critical books, with the SD506 - the C6500 has the SD501 if i am not mistaken but should run just fine.

    a little setup to align pages but nothing crazy......
  21. Re: KM 6500 with Heavy Duty Booklet Maker (9x12) in any Drawer...

    I know it will run from LCT, PF and Bypass.... not sure about standard trays.

    Set as custom paper 12x9 (SEF)
    Then you have to set you half fold setting in the menus.

    can post a photo of...
  22. Replies
    9
    Views
    381

    Re: KM C1100 BW machine crashes VDP

    i would say bartender is not the right software for VDP, says its for labels. Def not a ideal solutions for 50m variable pages to send as a pdf.

    You should be looking at VDP solutions that output...
  23. Replies
    9
    Views
    381

    Re: KM C1100 BW machine crashes VDP

    You have the PRO 1100 not the C1100?

    how are you creating and sending files? what format?
    PPML? PDF? from word (BARF)?

    suspect buffering is the issue....

    need more info...

    we run...
  24. Replies
    20
    Views
    2,340

    Re: Bizhub C6500 Error code C-4520

    swap transfer belts with other machine and test...

    see if its completes....

    Process Unit Close easily?
    Belt drive well? Seen the mesh gear start to fail...


    IN my mind if both reg assy...
  25. Replies
    20
    Views
    2,340

    Re: Bizhub C6500 Error code C-4520

    I have had this when the cleaning unit is due for replacement, the seals are failing and kicking up a abnormal amount of toner right into the reg. sensors. you clean and it works in service because...
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4